您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

iOS 應用內截屏:UIView 與 OpenGL 兩種場景的做法

編輯:iOS 開發綜合

iPhone 自帶的截屏功能已經很好用,一般使用者不會在 App 裡找這個功能。但有幾種情況你非得自己做不可:例如播放器用 OpenGL 渲染影片,系統截屏會把 OSD 疊加層一起拍進去,而你只想要乾淨的影片畫面。

關鍵差異在於:OpenGL 是直接寫進 GPU 的 frame buffer,用一般方式讀 layer 是讀不到的。所以分成兩種情況處理。

情況一:純 UIKit 介面

- (void)snapshotScreen {
    // 檢查是否為 retina 螢幕(iPod 有非 retina 機型)
    if ([[UIScreen mainScreen] respondsToSelector:@selector(scale)]) {
        UIGraphicsBeginImageContextWithOptions(self.view.window.bounds.size, NO,
                                               [UIScreen mainScreen].scale);
    } else {
        UIGraphicsBeginImageContext(self.view.window.bounds.size);
    }

    [self.view.window.layer renderInContext:UIGraphicsGetCurrentContext()];
    UIImage *image = UIGraphicsGetImageFromCurrentImageContext();
    UIGraphicsEndImageContext();

    NSData *data = UIImagePNGRepresentation(image);
    NSArray *path = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
    NSString *filename = [[path objectAtIndex:0] stringByAppendingPathComponent:@"foo.png"];
    [data writeToFile:filename atomically:YES];
}

前半段在判斷 retina,因為 scale 參數會直接影響輸出的像素尺寸;最後把圖存進 App 的 Documents 目錄。

情況二:OpenGL 渲染的內容

這時候要走 glReadPixels 把 frame buffer 的內容讀出來:

- (void)getGLScreenShot {
    int w = self.bounds.size.width;
    int h = self.bounds.size.height;
    NSInteger myDataLength = w * h * 4;

    GLubyte *buffer = (GLubyte *)malloc(myDataLength);
    glReadPixels(0, 0, w, h, GL_RGBA, GL_UNSIGNED_BYTE, buffer);

    // OpenGL 的原點在左下,畫面上下顛倒,要翻正
    GLubyte *buffer2 = (GLubyte *)malloc(myDataLength);
    for (int y = 0; y < h; y++) {
        for (int x = 0; x < w * 4; x++) {
            buffer2[(h - 1 - y) * w * 4 + x] = buffer[y * 4 * w + x];
        }
    }

    CGDataProviderRef provider = CGDataProviderCreateWithData(NULL, buffer2, myDataLength, NULL);

    int bitsPerComponent = 8;
    int bitsPerPixel = 32;
    int bytesPerRow = 4 * w;
    CGColorSpaceRef colorSpaceRef = CGColorSpaceCreateDeviceRGB();
    CGBitmapInfo bitmapInfo = kCGBitmapByteOrderDefault;
    CGColorRenderingIntent renderingIntent = kCGRenderingIntentDefault;

    CGImageRef imageRef = CGImageCreate(w, h, bitsPerComponent, bitsPerPixel, bytesPerRow,
                                        colorSpaceRef, bitmapInfo, provider, NULL, NO, renderingIntent);
    UIImage *myImage = [UIImage imageWithCGImage:imageRef];

    UIImageWriteToSavedPhotosAlbum(myImage, self,
        @selector(GLImage:didFinishSavingWithError:contextInfo:), buffer2);

    CGImageRelease(imageRef);
    CGDataProviderRelease(provider);
    CGColorSpaceRelease(colorSpaceRef);
    free(buffer);
}

注意這裡刻意沒有釋放 buffer2:寫入相簿是非同步的,要等 GLImage:didFinishSavingWithError:contextInfo: 回呼時才能清掉。順著這個回呼,也可以在 UI 上做限制,避免使用者連續快速截屏把系統壓垮。

中間那兩層 for 迴圈就是上下翻轉用的,寫法效率不高,但暫時沒找到更好的方式。如果要優化,可以直接改寫 kCGBitmapByteOrder 的組合並搭配 CGContextTranslateCTM,或反過來在建立 CGImage 時就指定 kCGBitmapInfoFloatComponents 相關旗標來避免這份拷貝。

情況三:iOS 7 之後的懶人解法

iOS 7 為 UIView 加了 drawViewHierarchyInRect:afterScreenUpdates:,它會把 view 階層「渲染」成點陣圖,因此 OpenGL 內容也一起進來,兩種場景一次搞定:

// 僅支援 iOS 7 以上
- (void)snapshotScreenWithGL {
    CGSize size = videoView.bounds.size;
    UIGraphicsBeginImageContextWithOptions(size, NO, [UIScreen mainScreen].scale);

    CGRect rec = CGRectMake(videoView.frame.origin.x, videoView.frame.origin.y,
                            videoView.bounds.size.width, videoView.bounds.size.height);
    [self.view drawViewHierarchyInRect:rec afterScreenUpdates:YES];

    UIImage *image = UIGraphicsGetImageFromCurrentImageContext();
    UIGraphicsEndImageContext();

    NSData *data = UIImagePNGRepresentation(image);
    NSArray *path = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
    NSString *filename = [[path objectAtIndex:0] stringByAppendingPathComponent:@"foo.png"];
    [data writeToFile:filename atomically:YES];
}

afterScreenUpdates: 這個參數值得留意:傳 YES 會先把畫面同步一次再截,能拍到最新狀態但較慢;傳 NO 則直接取目前內容,快但可能是前一帧。做影片截帧時通常傳 NO 比較合適。

還有一個更輕的選擇

如果你要的只是「一張快照」而不是真的檔案,[view snapshotViewAfterScreenUpdates:] 會回傳一個 UIView,成本遠低於轉成 UIImage。適合用在把某個區塊暫時「凍結」當作轉場背景,或做列表 cell 的快取。

最後提醒,若 App 會把截圖存進相簿,別忘了在 Info.plist 加上 NSPhotoLibraryAddUsageDescription;同時在 UI 上做節流,連續截屏不只耗 CPU,也會讓使用者不明的相簿被塞滿檔案。

  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved