iOS 開發裡的「計時」需求無所不在,但工具選錯往往會踩坑。以下把三種主流方案的使用方式與特性一次講清楚。
寫法一,便利構造器:
NSTimer *timer = [NSTimer scheduledTimerWithTimeInterval:1.0
target:self
selector:@selector(action:)
userInfo:nil
repeats:NO];
[timer invalidate];
呼叫上述方法後,target 的計數會 +1,任務執行完畢才會 -1。如果是重複執行的計時器,必須手動關閉,否則對應的釋放方法永遠不會被呼叫。
寫法二(推薦),先建立再手動加入 RunLoop:
NSTimer *timer = [NSTimer timerWithTimeInterval:5
target:self
selector:@selector(timerAction)
userInfo:nil
repeats:YES];
[[NSRunLoop mainRunLoop] addTimer:timer forMode:NSDefaultRunLoopMode];
[timer invalidate];
要注意的延遲問題:無論是一次性還是週期性計時器,實際觸發時間都與它加入的 RunLoop 及 RunLoop Mode 有關。如果該 RunLoop 正在執行一段連續運算(例如滑動列表),計時器就會被延後觸發。
- (void)startDisplayLink {
self.displayLink = [CADisplayLink displayLinkWithTarget:self
selector:@selector(handleDisplayLink:)];
[self.displayLink addToRunLoop:[NSRunLoop currentRunLoop]
forMode:NSDefaultRunLoopMode];
}
- (void)handleDisplayLink:(CADisplayLink *)displayLink {
// 每幀執行
}
- (void)stopDisplayLink {
[self.displayLink invalidate];
self.displayLink = nil;
}
CADisplayLink 是一個能讓你以「螢幕刷新率同步」的頻率把內容畫到螢幕上的計時器類別。以特定模式註冊到 RunLoop 之後,每當螢幕完成一次內容刷新,RunLoop 就會向 CADisplayLink 指定的 target 發送一次 selector 訊息。
由於 iOS 裝置的螢幕刷新率是固定的,CADisplayLink 正常情況下每次刷新結束都會被呼叫,精度相當高。它的使用場景相對專一,特別適合需要持續重繪的 UI 場景,例如自訂動畫引擎或影片播放的渲染迴圈——因為它本身就與螢幕刷新同步,你不需要另外去關心刷新頻率。
執行一次:
double delayInSeconds = 2.0;
dispatch_time_t popTime = dispatch_time(DISPATCH_TIME_NOW, delayInSeconds * NSEC_PER_SEC);
dispatch_after(popTime, dispatch_get_main_queue(), ^(void){
// 執行你的事件
});
重複執行:
NSTimeInterval period = 1.0; // 設定時間間隔
dispatch_queue_t queue = dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_DEFAULT, 0);
dispatch_source_t _timer = dispatch_source_create(DISPATCH_SOURCE_TYPE_TIMER, 0, 0, queue);
dispatch_source_set_timer(_timer, dispatch_walltime(NULL, 0), period * NSEC_PER_SEC, 0); // 每秒觸發
dispatch_source_set_event_handler(_timer, ^{
// 在這裡執行事件
});
dispatch_resume(_timer);
關鍵差異在於:NSTimer 受 RunLoop 影響,而 GCD 計時器不受影響——畢竟 RunLoop 本身也是建立在 GCD 之上的。這也是為什麼 GCD Timer 更適合做不受主執行緒阻塞影響的後台計時。
App 進入背景後 NSTimer 會停止,回到前台時如果直接繼續倒數,時間就會對不上。解法是記錄進入背景的時間點,回前台時把差值補回來。
@interface ViewController ()
@property (nonatomic, strong) NSTimer *timer; // 計時器
@property (nonatomic, assign) int countDown; // 倒數值
@property (nonatomic, strong) NSDate *beforeDate; // 上次進入背景的時間
@end
static int const tick = 60;
@implementation ViewController
- (void)viewDidLoad {
[super viewDidLoad];
[self setupNotification];
[self startCountDown];
}
- (void)dealloc {
[[NSNotificationCenter defaultCenter] removeObserver:self
name:UIApplicationDidEnterBackgroundNotification
object:nil];
[[NSNotificationCenter defaultCenter] removeObserver:self
name:UIApplicationWillEnterForegroundNotification
object:nil];
[self stopTimer];
}
- (void)setupNotification {
[[NSNotificationCenter defaultCenter] addObserver:self
selector:@selector(enterBG)
name:UIApplicationDidEnterBackgroundNotification
object:nil];
[[NSNotificationCenter defaultCenter] addObserver:self
selector:@selector(enterFG)
name:UIApplicationWillEnterForegroundNotification
object:nil];
}
/** 進入背景,記錄當前時間 */
- (void)enterBG {
_beforeDate = [NSDate date];
}
/** 回到前台,依停留時長補償倒數值 */
- (void)enterFG {
NSDate *now = [NSDate date];
int interval = (int)ceil([now timeIntervalSinceDate:_beforeDate]);
int val = _countDown - interval;
if (val > 1) {
_countDown -= interval;
} else {
_countDown = 1;
}
}
/** 開始倒計時 */
- (void)startCountDown {
_countDown = tick; // 重置計時
_timer = [NSTimer timerWithTimeInterval:1.0
target:self
selector:@selector(timerFired:)
userInfo:nil
repeats:YES];
// 使用 NSRunLoopCommonModes,才能保證 RunLoop 切換模式時計時器仍正常運作
[[NSRunLoop currentRunLoop] addTimer:_timer forMode:NSRunLoopCommonModes];
// 注意:計時器存活期間,self 是被強引用的
}
- (void)timerFired:(NSTimer *)timer {
if (_countDown == 0) {
[self stopTimer];
NSLog(@"重新發送");
} else {
_countDown -= 1;
NSLog(@"倒計時中:%d", _countDown);
}
}
- (void)stopTimer {
if (_timer) {
[_timer invalidate];
}
}
@end
三種方案的定位可以這樣記:NSTimer 簡單直覺但受 RunLoop 拖累;CADisplayLink 精度最高、天生對齊螢幕刷新;GCD Timer 精度好且不受 RunLoop 干擾,適合後台計時。