UIView 裡有個方法叫 layoutSubviews:
- (void)layoutSubviews; // override point. called by layoutIfNeeded automatically. // As of iOS 6.0, when constraints-based layout is used the base implementation // applies the constraints-based layout, otherwise it does nothing.
它的職責是「重新佈局 subviews」。當你想更新子視圖的位置或大小時,重寫這個方法就是標準做法。系統預設實作什麼都不做,所以要用就必須自己覆寫,並記得呼叫 super。
iPad 上「好的應用」通常會為橫屏與豎屏設計不同的版面。下面兩張截圖來自同一個頁面的兩個方向——內容相同,佈局不同。


實作關鍵就在 layoutSubviews:當 view 設定為自動適配螢幕後,使用者旋轉裝置時系統會呼叫它,我們只要在裡面判斷方向、重設各子視圖的 frame 即可。
先做一个最精簡的原型:左邊一張圖,右邊一個「圖 + 文字」的子視圖。

結構上,我在主視圖放了一個 ContentView,再在 ContentView 裡放一個 ArticleView。右側的文字與綠色方塊是由 ArticleView 封裝的。兩個 view 的 xib 都開著:

-(void)layoutSubviews {
[super layoutSubviews];
UIDeviceOrientation interfaceOrientation = [[UIApplication sharedApplication] statusBarOrientation];
if (interfaceOrientation == UIDeviceOrientationPortrait ||
interfaceOrientation == UIDeviceOrientationPortraitUpsideDown) {
// 豎屏
[self setVerticalFrame];
} else if (interfaceOrientation == UIDeviceOrientationLandscapeLeft ||
interfaceOrientation == UIDeviceOrientationLandscapeRight) {
// 橫屏
[self setHorizontalFrame];
}
}
-(void)setVerticalFrame {
NSLog(@"豎屏");
[titleLable setFrame:CGRectMake(283, 0, 239, 83)];
[leftView setFrame:CGRectMake(38, 102, 384, 272)];
[rightView setFrame:CGRectMake(450, 102, 282, 198)];
}
-(void)setHorizontalFrame {
NSLog(@"橫屏");
[titleLable setFrame:CGRectMake(183, 0, 239, 83)];
[leftView setFrame:CGRectMake(168, 122, 384, 272)];
[rightView setFrame:CGRectMake(650, 122, 282, 198)];
}
因為用的是 xib,初始化入口是 initWithCoder::
-(id)initWithCoder:(NSCoder *)aDecoder {
if ((self = [super initWithCoder:aDecoder])) {
NSArray *arrayContentView = [[NSBundle mainBundle] loadNibNamed:@"ArticleView" owner:self options:nil];
rightView = [arrayContentView objectAtIndex:0];
[self addSubview:rightView];
}
return self;
}
-(void)layoutSubviews {
[super layoutSubviews];
UIDeviceOrientation interfaceOrientation = [[UIApplication sharedApplication] statusBarOrientation];
CGRect rect = self.frame;
rect.size.width = 282;
rect.size.height = 198;
[self setFrame:rect];
if (interfaceOrientation == UIDeviceOrientationPortrait ||
interfaceOrientation == UIDeviceOrientationPortraitUpsideDown) {
[self setVerticalFrame];
} else if (interfaceOrientation == UIDeviceOrientationLandscapeLeft ||
interfaceOrientation == UIDeviceOrientationLandscapeRight) {
[self setHorizontalFrame];
}
}
-(void)setVerticalFrame {
NSLog(@"豎屏");
[contentView setFrame:CGRectMake(12, 6, 250, 125)];
[textLable setFrame:CGRectMake(50, 139, 182, 39)];
}
-(void)setHorizontalFrame {
NSLog(@"橫屏");
[contentView setFrame:CGRectMake(12, 6, 106, 158)];
[textLable setFrame:CGRectMake(135, 11, 147, 39)];
}
蘋果文件明確表示不該直接呼叫它來重新佈局,那它究竟何時觸發?整理如下:
· 手動呼叫(不建議,但確實會觸發)。
· 呼叫 setNeedsLayout 後於下一個週期,或 layoutIfNeeded 立即觸發。
· 呼叫 addSubview: 時。
· view 的 frame 改變時。
· 滑動 UIScrollView 時。
· 旋轉螢幕時,會觸發父 UIView 的 layoutSubviews。
· 改變某個 UIView 大小時,也會觸發其父檢視的 layoutSubviews。
要特別注意一個細節:當 view 的 frame 值為 0 時,addSubview 不會觸發 layoutSubviews。
最後談談這個範例本身的取捨。用 statusBarOrientation 判斷方向、再硬寫兩組座標,是最直覺但也是最脆弱的做法——一旦加入更多尺寸或 Localization,座標表會迅速膨脹。現行專案更合適的選擇是 Auto Layout + Size Class,或至少把方向判斷抽成一個獨立的 Category,讓 layoutSubviews 保持單純。理解 layoutSubviews 的觸發時機與 super 呼叫責任,才是這個方法真正的價值所在。