網路上常見用 [request setAllowResumeForFileDownloads:YES]; 來做續傳的說法,但它並不是真正意義上的斷點續傳——它只能讓應用在「下載過程中」暫停與繼續,一旦退出應用再進來就失效了。不過,透過 ASIHTTPRequest 的異步請求與 delegate,還是可以實現真正的斷點續傳。本文以 Grails 撰寫的斷點續傳伺服器端為例。
異步請求的程式碼:
-(void) doSimpleGetBinary{
NSURL *url = [NSURL URLWithString:@"https://localhost:8080/BookProto/book/image"];
ASIHTTPRequest *request = [ASIHTTPRequest requestWithURL:url];
[request setRequestMethod:@"GET"];
//[request addRequestHeader:@"Range" value:@"bytes=3-"];
[request setDelegate:self];
[request startAsynchronous];
}
這裡設定了 delegate,需在標頭檔中實作相應的 protocol:
@interface CFHttpDemoViewController : UIViewController<ASIProgressDelegate> {
本例用到 delegate 的以下方法。
requestFinished:異步請求結束後呼叫。
- (void)requestFinished:(ASIHTTPRequest *)request{
NSLog(@"response status code: %i",[request responseStatusCode]);
NSLog(@"response content length: %@",[[request responseHeaders] objectForKey:@"Content-Length" ]);
NSLog(@"request finished.");
label.text=@"request finished.";
}
下面的方法在緩衝區收到部分資料後呼叫,看起來是每隔一段毫秒就觸發一次,並傳入緩衝區的 NSData 物件。
-(void)request:(ASIHTTPRequest *)request
didReceiveData:(NSData *)data{
NSLog(@"did receive data, data length: %i",[data length]);
//複製到位元組陣列中
Byte *byteData=(Byte *)malloc([data length]);
memcpy(byteData,[data bytes],[data length]);
for (int i=0; i<=10; i++) {
NSLog(@"%i: %i",i+1,byteData[i]);
}
free(byteData);
[request cancel];
label.text=@"canceled.";
}
執行時,分別屏蔽與取消屏蔽 [request addRequestHeader:@"Range" value:@"bytes=3-"]; 這行,可以看到回傳資料的變化:加上 Range 請求頭後,狀態碼由 200 變成 206(Partial Content),且收到的第一個位元組從頭開始變成從第 3 個位元組之後,這正是伺服器依 Range 回傳部分內容的證明。
2. NSURLConnection 實現斷點續傳的關鍵,是自訂 http request 的 Range 請求頭。
Range 請求頭可以請求一個或多個子範圍,例如:
表示頭 500 個位元組:bytes=0-499
表示第二個 500 位元組:bytes=500-999
表示最後 500 個位元組:bytes=-500
表示 500 位元組以後的範圍:bytes=500-
第一個與最後一個位元組:bytes=0-0,-1
同時指定多個範圍:bytes=500-600,601-999
但伺服器可以忽略此請求頭;若無條件 GET 帶了 Range 請求頭,回應會以狀態碼 206(Partial Content)而非 200(OK)返回。
在 iOS 中用 NSMutableURLRequest 定義請求頭:
NSURL *url1=[NSURL URLWithString:@"下載地址"];
NSMutableURLRequest* request1=[NSMutableURLRequest requestWithURL:url1];
[request1 setValue:@"bytes=20000-" forHTTPHeaderField:@"Range"];
[request1 setCachePolicy:NSURLRequestReloadIgnoringLocalCacheData];
NSData *returnData1 = [NSURLConnection sendSynchronousRequest:request1 returningResponse:nil error:nil];
[self writeToFile:returnData1 fileName:@"SOMEPATH"];
接著把收到的資料以「附加」模式寫入檔案,關鍵是 fopen 時使用 "ab+"(附加二進位),並把檔案指標移到結尾:
-(void)writeToFile:(NSData *)data fileName:(NSString *) fileName
{
NSString *filePath=[NSString stringWithFormat:@"%@",fileName];
if([[NSFileManager defaultManager] fileExistsAtPath:filePath] == NO){
NSLog(@"file not exist,create it...");
[[NSFileManager defaultManager] createFileAtPath:filePath contents:nil attributes:nil];
}else {
NSLog(@"file exist!!!");
}
FILE *file = fopen([fileName UTF8String], [@"ab+" UTF8String]);
if(file != NULL){
fseek(file, 0, SEEK_END);
}
int readSize = [data length];
fwrite((const void *)[data bytes], readSize, 1, file);
fclose(file);
}
整體思路就是:紀錄已下載的位元組數,透過 Range 請求頭只抓取剩下的部分,再以附加模式續寫到本地檔案,如此即使中斷後重新連線,也能從中斷處繼續下載。