您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

iOS 開發系列:Quartz 2D 繪圖核心觀念全面解析

編輯:iOS 開發綜合

要在 iOS 上畫出三角形、圓角、漸層或陰影,最終都會回到同一個引擎:Quartz 2D。它是 Core Graphics 框架的一部分,也是 UIKit 所有元件背後的作畫者。

Quartz 2D 的定位

Quartz 2D 是一個強大的二維繪圖引擎。我們日常使用的 UIKit 元件,其實都是由 Core Graphics 一筆一筆畫出來的;當你引入 UIKit 時,系統會自動帶入 Core Graphics,並在 UIKit 內部把常用 API 再包一層,讓開發者用起來更直覺。

這也解釋了為什麼自訂 View 的繪圖邏輯,和系統元件的呈現方式其實是同一套東西。

繪圖的六個標準步驟

  1. 取得繪圖上下文
  2. 建立並設定路徑
  3. 把路徑加入上下文
  4. 設定上下文狀態
  5. 執行繪製
  6. 釋放路徑物件

關於圖形上下文 CGContextRef

CGContextRef 代表「畫到哪裡去」,也就是繪圖的輸出裝置,同時保存了線寬、顏色、陰影等設備相關資訊。Quartz 2D 中的所有物件最後都必須畫到某個上下文上。

這個抽象化的設計有個好處:你不必在意目標是螢幕還是印表機,程式碼寫法完全一致。常見的上下文來源包括 Bitmap、PDF、Window、Layer 與 Printer。

取得上下文

UIKit 已經為每個 View 準備好一個上下文,但只有在 drawRect: 方法中可以取得(這個方法在 loadView、viewDidLoad 之後執行)。其他 UI 方法呼叫 UIGraphicsGetCurrentContext() 會拿到 nil。

實作方式是自己寫一個繼承 UIView 的子類,例如 KCView,並覆寫 drawRect::

#import "KCView.h"

@implementation KCView

// 繪圖只能在此方法中進行,否則取不到當前上下文
- (void)drawRect:(CGRect)rect {
    // 1. 取得圖形上下文
    CGContextRef context = UIGraphicsGetCurrentContext();

    // 2. 建立路徑
    CGMutablePathRef path = CGPathCreateMutable();
    CGPathMoveToPoint(path, nil, 20, 50);      // 設定起點
    CGPathAddLineToPoint(path, nil, 20, 100);  // 畫出第一段直線
    CGPathAddLineToPoint(path, nil, 300, 100); // 從上一點繼續畫

    // 3. 把路徑加入上下文
    CGContextAddPath(context, path);

    // 4. 設定上下文狀態
    CGContextSetRGBStrokeColor(context, 1.0, 0, 0, 1);   // 筆觸顏色
    CGContextSetRGBFillColor(context, 0, 1.0, 0, 1);     // 填充顏色
    CGContextSetLineWidth(context, 2.0);                 // 線寬
    CGContextSetLineCap(context, kCGLineCapRound);       // 端點樣式
    CGContextSetLineJoin(context, kCGLineJoinRound);     // 轉角樣式

    // 虛線:phase 為起始偏移,lengths 描述「實線長度、間隔」的循環
    CGFloat lengths[2] = { 18, 9 };
    CGContextSetLineDash(context, 0, lengths, 2);

    // 陰影:offset 偏移量、blur 模糊度、color 陰影顏色
    // 注意 Quartz 2D 跨平台,不能直接吃 UIColor,需轉成 CGColor
    CGColorRef color = [UIColor grayColor].CGColor;
    CGContextSetShadowWithColor(context, CGSizeMake(2, 2), 0.8, color);

    // 5. 繪製到上下文,參數為填充模式
    CGContextDrawPath(context, kCGPathFillStroke);

    // 6. 釋放路徑
    CGPathRelease(path);
}

@end

填充模式的五種選擇

  • kCGPathFill:只有填充(非零環繞數規則),不畫邊框。
  • kCGPathEOFill:奇偶規則填充,路徑交疊處奇數填、偶數不填。
  • kCGPathStroke:只畫邊框。
  • kCGPathFillStroke:邊框與填充都畫。
  • kCGPathEOFillStroke:奇偶填充並畫邊框。

把 View 掛到畫面上

- (void)viewDidLoad {
    [super viewDidLoad];

    KCView *view = [[KCView alloc] initWithFrame:[UIScreen mainScreen].bounds];
    view.backgroundColor = [UIColor whiteColor];
    [self.view addSubview:view];
}

幾個實務提醒

用 CGMutablePathRef 建立的路徑必須手動 CGPathRelease,這是MRC 時代留下的習慣;若在 ARC 專案中使用 Core Graphics 物件, likewise 仍要自行管理,因為 ARC 不接管 Core Foundation 家族。

另外,drawRect: 每次重繪都會重新執行,因此不要在裡面做重運算或 I/O。真正需要頻繁更新時,改用 CALayer 或 Core Animation 會更有效率。

  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved