您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

iOS 時間顯示:x 分鐘前 / 昨天 / x 天前的實作

編輯:iOS 開發綜合

社群類應用幾乎都需要「相對時間」顯示:剛剛、5 分鐘前、3 小時前、昨天、上週。這比直接印出 2015-07-08 19:09:39 友善得多。以下是一個可直接使用的 NSDate 分類實作。

實作程式碼

// 物件方法:直接對 self 計算
- (NSString *)timeInfo {
    return [NSDate timeInfoWithDate:self];
}

// 由 NSDate 出發,先轉成字串再走統一入口
+ (NSString *)timeInfoWithDate:(NSDate *)date {
    return [self timeInfoWithDateString:
            [self stringWithDate:date format:[self ymdHmsFormat]]];
}

+ (NSString *)timeInfoWithDateString:(NSString *)dateString {
    NSDate *date    = [self dateWithString:dateString format:[self ymdHmsFormat]];
    NSDate *curDate = [NSDate date];

    // 注意:這裡是 date - curDate,過去時間會是負值
    NSTimeInterval time = -[date timeIntervalSinceDate:curDate];

    int month = (int)([curDate month] - [date month]);
    int year  = (int)([curDate year]  - [date year]);
    int day   = (int)([curDate day]   - [date day]);

    NSTimeInterval retTime = 1.0;

    // 1. 小於一小時:顯示分鐘
    if (time < 3600) {
        retTime = time / 60;
        retTime = retTime <= 0.0 ? 1.0 : retTime;
        return [NSString stringWithFormat:@"%.0f 分鐘前", retTime];
    }

    // 2. 小於一天:顯示小時
    else if (time < 3600 * 24) {
        retTime = time / 3600;
        retTime = retTime <= 0.0 ? 1.0 : retTime;
        return [NSString stringWithFormat:@"%.0f 小時前", retTime];
    }

    // 3. 剛好落在前一天:顯示「昨天」
    else if (time < 3600 * 24 * 2) {
        return @"昨天";
    }

    // 4. 一個月以內:顯示天數
    //    條件一:同年且相隔不超過一個月
    //    條件二:跨年,且是去年 12 月 → 今年 1 月這種相鄰情形
    else if ((abs(year) == 0 && abs(month) <= 1) ||
             (abs(year) == 1 && [curDate month] == 1 && [date month] == 12)) {

        int retDay = 0;

        if (year == 0 && month == 0) {
            retDay = day;   // 同年同月,直接取日期差
        }

        if (retDay <= 0) {
            // 取該月總天數,換算成距離今天的天數
            int totalDays = (int)[self daysInMonth:date month:[date month]];
            retDay = (int)[curDate day] + (totalDays - (int)[date day]);
        }

        return [NSString stringWithFormat:@"%d 天前", abs(retDay)];
    }

    // 5. 更久以前:顯示月或年
    else {
        if (abs(year) <= 1) {
            if (year == 0) {
                return [NSString stringWithFormat:@"%d 個月前", abs(month)];
            }

            // 跨年的情況
            int month    = (int)[curDate month];
            int preMonth = (int)[date month];

            // 跨年但同月,視為滿一年
            if (month == 12 && preMonth == 12) {
                return @"1 年前";
            }

            return [NSString stringWithFormat:@"%d 個月前",
                    abs(12 - preMonth + month)];
        }

        return [NSString stringWithFormat:@"%d 年前", abs(year)];
    }
}

實務上的幾個建議

  • 直接用 NSDateComponents 算差值更準。上面的版本靠 timeIntervalSinceDate 搭配月、年的粗略相減來判斷,遇到大小月和閏年時容易有邊界誤差。iOS 8 之後可以直接用 NSCalendar 的 components:fromDate:toDate:options: 取得精確的天、時、分差異,程式碼反而更短。
  • 時間基準要用伺服器時間。使用者裝置時鐘不準是常態,若時間顯示牽涉業務邏輯(例如活動倒數),應以伺服器時間為準並定期校正。
  • 跨年判斷要小心。原實作用 abs(year) == 1 搭配月份比對來處理跨年,但沒排除「跨年且相隔超過一個月」的情形(例如去年 3 月到今天 1 月),會被誤判成「X 個月前」。改用 NSDateComponents 後這個問題自然消失。
  • 記得本地化。若要支援多語言,別把「分鐘前」「昨天」寫死在中文字串裡,改用 NSLocalizedString 並搭配 NSDateComponentsFormatter 的 relativeDateFormatter,系統會自動輸出各地區的慣用寫法。
  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved