剛做完一版購物車,本來是照著淘寶的邏輯做的,結果換了產品經理,人家偏好京東那種風格,一句「換個風格」就全部重來。既然需求來了,那就照著改,順便把過程整理成一份 Demo 分享出來。
整個主介面全靠 Auto Layout 撐起來,光主控制器就接近 800 行,全部加起來相當可觀。效果基本都實現了,先看圖。
再來一組:
- (void)show:(UITapGestureRecognizer *)tap {
if (!self.chooseVC) {
self.chooseVC = [[ChooseGoodsPropertyViewController alloc] init];
}
self.chooseVC.enterType = FirstEnterType;
__weak typeof(self) weakSelf = self;
self.chooseVC.block = ^{
NSLog(@"點擊回調去購物車");
// 這裡一定要移除,否則控制器階層會亂掉。
// 這個效果其實是 addChildVC 來的,最終展示在 Window 上,必須收尾。
[weakSelf.chooseVC.view removeFromSuperview];
[weakSelf.chooseVC removeFromParentViewController];
weakSelf.chooseVC.view = nil;
weakSelf.chooseVC = nil;
MKJShoppingCartViewController *shop = [MKJShoppingCartViewController new];
[weakSelf.navigationController pushViewController:shop animated:YES];
};
self.chooseVC.price = 256.0f;
[self.navigationController presentSemiViewController:self.chooseVC withOptions:@{
KNSemiModalOptionKeys.pushParentBack : @(YES),
KNSemiModalOptionKeys.animationDuration : @(0.6),
KNSemiModalOptionKeys.shadowOpacity : @(0.3),
KNSemiModalOptionKeys.backgroundView : [[UIImageView alloc] initWithImage:[UIImage imageNamed:@"background_01"]]
}];
}
要注意的是它的視圖階層關係。如果你要 push 到下一個介面,務必把子控制器與它的 view 都 remove 掉,最好直接把指標置為 nil,就像上面這樣。否則視圖階層會殘留,介面顯示就會出問題。
先看視圖樹結構:
contentView
├── NormalView(正常狀態下的控件)
│ ├── chooseButton
│ └── ProductImageView
└── EditBackView(編輯狀態下的控件)
這個 Cell 裡面有二十多個控件,全部用約束固定好,再搭配 FD 系列工具,一行程式碼就能實現高度自適應,還能同時支援編輯與非編輯兩種狀態。
這一套下來省了好幾百行程式碼。
// 高度計算
- (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath {
BuyerInfo *buyer = self.buyerLists[indexPath.section];
if (buyer.buyerIsEditing) {
return 100;
} else {
CGFloat actualHeight = [tableView fd_heightForCellWithIdentifier:shoppongID
cacheByIndexPath:indexPath
configuration:^(ShoppingCartCell *cell) {
[self configCell:cell indexPath:indexPath];
}];
return actualHeight >= 100 ? actualHeight : 100;
}
}
再搭配一套 delegate,Cell 的互動就完整了:
@protocol ShoppingCartCellDelegate <NSObject> // 點擊單個商品選擇按鈕回調 - (void)productSelected:(ShoppingCartCell *)cell isSelected:(BOOL)choosed; // 點擊買手選擇按鈕回調 - (void)buyerSelected:(NSInteger)sectionIndex; // 點擊買手編輯回調 - (void)buyerEditingSelected:(NSInteger)sectionIdx; // 點擊垃圾桶刪除 - (void)productGarbageClick:(ShoppingCartCell *)cell; // 點擊編輯規格下拉回調 - (void)clickEditingDetailInfo:(ShoppingCartCell *)cell; // 商品數量增加或減少回調 - (void)plusOrMinusCount:(ShoppingCartCell *)cell tag:(NSInteger)tag; // 點擊圖片跳轉展示 - (void)clickProductIMG:(ShoppingCartCell *)cell; @end @interface ShoppingCartCell : UITableViewCell @property (nonatomic, assign) id<ShoppingCartCellDelegate> delegate; @end
這部分思路是統一的:在商品 model 與買手 model 上各加一個 BOOL 欄位作為開關,然後在載入 cell 時依狀態做判斷。
只需要依商品的選取狀態累加即可:
#pragma mark - 計算選出商品的總價
- (CGFloat)countTotalPrice {
CGFloat totalPrice = 0.0;
for (BuyerInfo *buyer in self.buyerLists) {
if (buyer.buyerIsChoosed) {
// 買手整體被選中,累加他底下所有商品
for (ProductInfo *product in buyer.prod_list) {
totalPrice += product.order_price * product.count;
}
} else {
// 否則只累加被單獨勾選的商品
for (ProductInfo *product in buyer.prod_list) {
if (product.productIsChoosed) {
totalPrice += product.order_price * product.count;
}
}
}
}
return totalPrice;
}
這裡有個必踩的坑:批次刪除時絕對不能在 for 迴圈裡一個一個刪,必須先收集到暫存陣列,再統一刪除,否則索引會越界直接崩潰。
- (void)alertView:(UIAlertView *)alertView clickedButtonAtIndex:(NSInteger)buttonIndex {
// 單個刪除
if (alertView.tag == 101) {
if (buttonIndex == 1) {
NSIndexPath *indexpath = [self.tableView indexPathForCell:self.tempCellArray.firstObject];
BuyerInfo *buyer = self.buyerLists[indexpath.section];
ProductInfo *product = buyer.prod_list[indexpath.row];
if (buyer.prod_list.count == 1) {
// 該買手下只剩一個商品,連買手一起移除
[self.buyerLists removeObject:buyer];
} else {
[buyer.prod_list removeObject:product];
}
[self updateInfomation];
}
} else if (alertView.tag == 102) { // 多個或單個
if (buttonIndex == 1) {
NSMutableArray *buyerTempArr = [[NSMutableArray alloc] init];
for (BuyerInfo *buyer in self.buyerLists) {
if (buyer.buyerIsChoosed) {
// 買手整體被選中,直接收集起來
[buyerTempArr addObject:buyer];
} else {
NSMutableArray *productTempArr = [[NSMutableArray alloc] init];
for (ProductInfo *product in buyer.prod_list) {
if (product.productIsChoosed) {
// 先收集,不要邊遍歷邊刪
[productTempArr addObject:product];
}
}
if (![[MKJRequestHelper shareRequestHelper] isEmptyArray:productTempArr]) {
[buyer.prod_list removeObjectsInArray:productTempArr];
}
}
}
[self.buyerLists removeObjectsInArray:buyerTempArr];
[self updateInfomation];
}
}
}
任何刪除、選取、增減數量之後,價格、數量、全選狀態都要一併刷新,這一步最容易漏。
#pragma mark - 刪除之後的一系列更新操作
- (void)updateInfomation {
// 商品變動會反過來影響買手的選取狀態
for (BuyerInfo *buyer in self.buyerLists) {
NSInteger count = 0;
for (ProductInfo *product in buyer.prod_list) {
if (product.productIsChoosed) {
count++;
}
}
if (count == buyer.prod_list.count) {
buyer.buyerIsChoosed = YES;
}
}
// 再影響全選按鈕
self.allSelectedButton.selected = [self isAllProcductChoosed];
// 總價
self.totalPriceLabel.text = [NSString stringWithFormat:@"合計¥%.2f", [self countTotalPrice]];
// 結算按鈕
[self.accountButton setTitle:[NSString stringWithFormat:@"結算(%ld)", [self countTotalSelectedNumber]]
forState:UIControlStateNormal];
[self.tableView reloadData];
// 如果全部刪空了
if ([[MKJRequestHelper shareRequestHelper] isEmptyArray:self.buyerLists]) {
[self clickAllEdit:self.rightButton];
self.rightButton.enabled = NO;
}
}
給 tableFooterView 塞一個 CollectionView,後續要加各種推薦內容都方便擴充。關鍵在於:先拿到 layout 的內容尺寸,再決定 footer 高度,最後才賦值,這樣才不會出現顯示抖動。
// 請求相關商品資料
[[MKJRequestHelper shareRequestHelper] requestMoreRecommandInfo:^(id obj, NSError *err) {
[weakSelf.relatedProducts removeAllObjects];
weakSelf.relatedProducts = [[NSMutableArray alloc] initWithArray:(NSArray *)obj];
[weakSelf.collectionView reloadData];
// 依刷新後的資料取得 collectionViewContentSize 的高度
weakSelf.underFooterView.frame = CGRectMake(0, 0,
[UIScreen mainScreen].bounds.size.width,
weakSelf.collectionView.collectionViewLayout.collectionViewContentSize.height);
// 最後再賦值,避免顯示不順暢
weakSelf.tableView.tableFooterView = weakSelf.underFooterView;
}];
#pragma mark - 點擊圖片展示
- (void)clickProductIMG:(ShoppingCartCell *)cell {
NSIndexPath *indexpath = [self.tableView indexPathForCell:cell];
BuyerInfo *buyer = self.buyerLists[indexpath.section];
ProductInfo *product = buyer.prod_list[indexpath.row];
JTSImageInfo *imageInfo = [[JTSImageInfo alloc] init];
imageInfo.imageURL = [NSURL URLWithString:product.image];
JTSImageViewController *imageViewer = [[JTSImageViewController alloc]
initWithImageInfo:imageInfo
mode:JTSImageViewControllerMode_Image
backgroundStyle:JTSImageViewControllerBackgroundOption_Scaled];
[imageViewer showFromViewController:self
transition:JTSImageViewControllerTransition_FromOffscreen];
}
- (void)dealloc {
NSLog(@"%s____dealloc", object_getClassName(self));
}
能正常印出這行,大致就沒問題了。
這個 Demo 用的是本地假資料,真正上線還要接後端介面。整體寫下來,程式碼量其實不是重點,真正的複雜度全在狀態判斷與同步上。可能有不足之處,畢竟只是 Demo,拋磚引玉,覺得有幫助的話不妨下載研究看看。