您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 教學 >> iOS 相關教學

舉例講解 iOS 中 hitTest:withEvent: 觸摸事件的編寫方法

編輯:iOS 相關教學

一、hitTest:withEvent: 的預設流程

假設當前有 ViewA 與 ViewB,如果不重寫 hitTest:withEvent:,系統會先呼叫 ViewA 的 hitTest,再往下找 ViewB。系統內部的處理流程,跟下面這段重寫程式碼幾乎一模一樣:

- (UIView *)hitTest:(CGPoint)point withEvent:(UIEvent *)event {
    if ([self pointInside:point withEvent:event]) {
        // 觸摸點在自己身上,繼續往子視圖找
    } else {
        return nil;
    }

    for (UIView *subView in self.subviews) {
        if ([subView hitTest:point withEvent:event] != nil) {
            return subView;
        }
    }

    return self;
}

也就是說,不重寫時,每個 UIView 的預設行為就是上面這段邏輯。一般情況這樣就夠用了。

二、為什麼要重寫:事件穿透

重寫 hitTest 最常見的目的,是穿透上層的 view,讓 touch 事件能達到下面的 view。

例如 ViewB 完全蓋住了 ViewA,但我們希望點擊 ViewB 時由 ViewA 來響應,可以這樣寫:

- (UIView *)hitTest:(CGPoint)point withEvent:(UIEvent *)event {
    if ([self pointInside:point withEvent:event]) {
        NSLog(@"in view A");
        return self;
    }
    return nil;
}

三、深入案例:三個需求的組合

現在有一個更實際的界面結構:

Window
 |- ViewA
 |   |- ButtonA
 |- ViewB
     |- ButtonB

層次關係是:ViewB 完全蓋住了 ButtonA,ButtonB 疊在 ViewB 之上。需求如下:

  1. ButtonA 與 ButtonB 都能響應事件;
  2. ViewA 也能收到 ViewB 本來會收到的 touches 訊息;
  3. 不讓 ViewB(以及 ButtonB)收到訊息。

先理解一下預設情況下點擊 ButtonB 區域時 iOS 的處理過程。從 ViewA 開始依次呼叫 hitTest,各層 pointInside: 的回傳值為:

ViewA            : NO
ViewB            : YES
ButtonB          : YES
ButtonB.subViews : NO

於是 ButtonB 的子視圖 hitTest 都回傳 nil,最終由 ButtonB 自己作為處理物件,接著進入 touches 系列方法,觸發 ButtonB 綁定的 action,訊息傳遞到此結束。

四、需求一的實作:讓被遮住的 ButtonA 收到事件

ViewB 蓋住了 ButtonA,預設情況下 ButtonA 收不到訊息。但既然查找響應物件是從父視圖開始,我們就可以在 ViewA 的 hitTest 中做判斷:如果觸摸點落在 ButtonA 上,直接把 ButtonA 回傳出去。

#pragma mark - hitTest

- (UIView *)hitTest:(CGPoint)point withEvent:(UIEvent *)event {
    // 當 touch point 落在 _btn 上時,hitTest 直接回傳 _btn
    CGPoint btnPointInA = [_btn convertPoint:point fromView:self];
    if ([_btn pointInside:btnPointInA withEvent:event]) {
        return _btn;
    }

    // 否則走預設處理
    return [super hitTest:point withEvent:event];
}

如此一來,當觸碰點位於 ButtonA 上時,touch 訊息就被攔截在 ViewA 這層,ViewB 收不到,而 ButtonA 則能正常觸發它的點擊方法。

五、需求二的實作:把事件往父視圖傳

ViewB 只要覆寫 touches 系列方法,在自己處理完之後,透過 nextResponder 把訊息交給下一個響應者(即父視圖 ViewA):

// 在 ViewB 中
#pragma mark - touches

- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
    NSLog(@"B - touchesBegan..");
    // 把事件傳遞下去給父 View 或包含它的 ViewController
    [self.nextResponder touchesBegan:touches withEvent:event];
}

- (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event {
    NSLog(@"B - touchesMoved..");
    [self.nextResponder touchesBegan:touches withEvent:event];
}

- (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event {
    NSLog(@"B - touchesEnded..");
    [self.nextResponder touchesBegan:touches withEvent:event];
}

- (void)touchesCancelled:(NSSet *)touches withEvent:(UIEvent *)event {
    NSLog(@"B - touchesCancelled..");
    [self.nextResponder touchesBegan:touches withEvent:event];
}

然後在 ViewA 中就能收到這些訊息:

// 在 ViewA 中
- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
    NSLog(@"A - touchesBegan..");
}

- (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event {
    NSLog(@"A - touchesMoved..");
}

- (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event {
    NSLog(@"A - touchesEnded..");
}

- (void)touchesCancelled:(NSSet *)touches withEvent:(UIEvent *)event {
    NSLog(@"A - touchesCancelled..");
}

六、需求三的實作:讓 ViewB 完全不接收事件

最直接的方式是設定 ViewB.userInteractionEnabled = NO;。除此之外,也可以覆寫 pointInside:withEvent: 直接回傳 NO:

// 在 ViewB 中
- (BOOL)pointInside:(CGPoint)point withEvent:(UIEvent *)event {
    // 本 View 不響應用戶事件
    return NO;
}

三個需求合起來看,其實說明了同一件事:hitTest:withEvent: 決定「誰來處理」,而 touches 系列方法搭配 nextResponder 決定「處理不完就往誰傳」。把這兩層機制分清楚,絕大多數看似詭異的點擊穿透、事件被父層吃掉等問題都能找到明確的解法。

  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved