您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

iOS 開發中檔案上傳與多執行緒斷點下載的實作

編輯:iOS 開發綜合

檔案的上傳

檔案上傳走的是 POST 請求,通常把要上傳的資料放在請求主體中。本文示範不依賴任何第三方框架的做法。由於過程較繁瑣,這裡只列出關鍵程式碼。

#import "YYViewController.h"

#define YYEncode(str) [str dataUsingEncoding:NSUTF8StringEncoding]

@implementation YYViewController

- (void)upload:(NSString *)name
      filename:(NSString *)filename
      mimeType:(NSString *)mimeType
          data:(NSData *)data
        parmas:(NSDictionary *)params {
    NSURL *url = [NSURL URLWithString:@"https://192.168.1.200:8080/YYServer/upload"];
    NSMutableURLRequest *request = [NSMutableURLRequest requestWithURL:url];
    request.HTTPMethod = @"POST";

    // 組出請求主體
    NSMutableData *body = [NSMutableData data];

    /*************** 檔案參數 ***************/
    // 參數起始標記
    [body appendData:YYEncode(@"--YY\r\n")];
    // name 必須與伺服器端一致;filename 為檔名
    NSString *disposition = [NSString stringWithFormat:@"Content-Disposition: form-data; name=\"%@\"; filename=\"%@\"\r\n", name, filename];
    [body appendData:YYEncode(disposition)];
    NSString *type = [NSString stringWithFormat:@"Content-Type: %@\r\n", mimeType];
    [body appendData:YYEncode(type)];

    [body appendData:YYEncode(@"\r\n")];
    [body appendData:data];
    [body appendData:YYEncode(@"\r\n")];

    /*************** 普通參數 ***************/
    [params enumerateKeysAndObjectsUsingBlock:^(id key, id obj, BOOL *stop) {
        [body appendData:YYEncode(@"--YY\r\n")];
        NSString *disposition = [NSString stringWithFormat:@"Content-Disposition: form-data; name=\"%@\"\r\n", key];
        [body appendData:YYEncode(disposition)];
        [body appendData:YYEncode(@"\r\n")];
        [body appendData:YYEncode(obj)];
        [body appendData:YYEncode(@"\r\n")];
    }];

    /*************** 參數結束 ***************/
    [body appendData:YYEncode(@"--YY--\r\n")];
    request.HTTPBody = body;

    // 請求標頭
    [request setValue:[NSString stringWithFormat:@"%zd", body.length] forHTTPHeaderField:@"Content-Length"];
    [request setValue:@"multipart/form-data; boundary=YY" forHTTPHeaderField:@"Content-Type"];

    // 送出請求
    [NSURLConnection sendAsynchronousRequest:request queue:[NSOperationQueue mainQueue] completionHandler:^(NSURLResponse *response, NSData *data, NSError *connectionError) {
        if (data) {
            NSDictionary *dict = [NSJSONSerialization JSONObjectWithData:data options:NSJSONReadingMutableLeaves error:nil];
            NSLog(@"%@", dict);
        } else {
            NSLog(@"上傳失敗");
        }
    }];
}

- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
    // 上傳本地檔案
    NSURL *fileurl = [[NSBundle mainBundle] URLForResource:@"itcast.txt" withExtension:nil];
    NSURLRequest *request = [NSURLRequest requestWithURL:fileurl];
    NSURLResponse *repsonse = nil;
    NSData *data = [NSURLConnection sendSynchronousRequest:request returningResponse:&repsonse error:nil];

    // 取得 mimeType
    NSLog(@"%@", repsonse.MIMEType);

    [self upload:@"file" filename:@"itcast.txt" mimeType:repsonse.MIMEType data:data parmas:@{@"username" : @"999", @"type" : @"XML"}];
}

@end

補充:上傳請求的資料格式如下,boundary 兩端的標記必須前後呼應。

常見檔案的 MIMEType 可以參考下表(Tomcat 的 conf/web.xml 裡也能查到):

多執行緒斷點下載

這裡示範只用蘋果自帶的類,同時開多條執行緒下載同一個大檔案。實作步驟如下:

實現思路:下載開始時,先在沙盒建立一個與伺服器檔案等大的空白檔案(要下載 100M 就先配一個 100M 的檔),接著把總長度切成若干段,開啟多條執行緒各下載一段,再分別寫入檔案對應的偏移位置。

專案中的主要類別:

主控制器:

#import "YYViewController.h"
#import "YYFileMultiDownloader.h"

@interface YYViewController ()
@property (nonatomic, strong) YYFileMultiDownloader *fileMultiDownloader;
@end

@implementation YYViewController

- (YYFileMultiDownloader *)fileMultiDownloader {
    if (!_fileMultiDownloader) {
        _fileMultiDownloader = [[YYFileMultiDownloader alloc] init];
        // 遠端檔案網址
        _fileMultiDownloader.url = @"https://192.168.1.200:8080/MJServer/resources/jre.zip";
        // 存檔位置
        NSString *caches = [NSSearchPathForDirectoriesInDomains(NSCachesDirectory, NSUserDomainMask, YES) lastObject];
        _fileMultiDownloader.destPath = [caches stringByAppendingPathComponent:@"jre.zip"];
    }
    return _fileMultiDownloader;
}

- (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event {
    [self.fileMultiDownloader start];
}

@end

自訂一個抽象基底類別,統一對外介面:

// YYFileDownloader.h
#import <Foundation/Foundation.h>

@interface YYFileDownloader : NSObject
{
    BOOL _downloading;
}

/** 要下載檔案的遠端 URL */
@property (nonatomic, copy) NSString *url;
/** 檔案的儲存路徑 */
@property (nonatomic, copy) NSString *destPath;
/** 是否正在下載(只有下載器內部才知道) */
@property (nonatomic, readonly, getter = isDownloading) BOOL downloading;
/** 監聽下載進度 */
@property (nonatomic, copy) void (^progressHandler)(double progress);

/** 開始(恢復)下載 */
- (void)start;
/** 暫停下載 */
- (void)pause;

@end

單執行緒下載器,負責下載「一段」:

// YYFileSingleDownloader.h
#import "YYFileDownloader.h"

@interface YYFileSingleDownloader : YYFileDownloader
/** 起始位置 */
@property (nonatomic, assign) long long begin;
/** 結束位置 */
@property (nonatomic, assign) long long end;
@end
// YYFileSingleDownloader.m
#import "YYFileSingleDownloader.h"

@interface YYFileSingleDownloader () <NSURLConnectionDataDelegate>
@property (nonatomic, strong) NSURLConnection *conn;
/** 寫檔用的檔案 handle */
@property (nonatomic, strong) NSFileHandle *writeHandle;
/** 目前已下載的長度 */
@property (nonatomic, assign) long long currentLength;
@end

@implementation YYFileSingleDownloader

- (NSFileHandle *)writeHandle {
    if (!_writeHandle) {
        _writeHandle = [NSFileHandle fileHandleForWritingAtPath:self.destPath];
    }
    return _writeHandle;
}

/** 開始(恢復)下載 */
- (void)start {
    NSURL *url = [NSURL URLWithString:self.url];
    NSMutableURLRequest *request = [NSMutableURLRequest requestWithURL:url];  // 預設 GET
    // 關鍵:用 Range 標頭指定要下載的區段
    NSString *value = [NSString stringWithFormat:@"bytes=%lld-%lld", self.begin + self.currentLength, self.end];
    [request setValue:value forHTTPHeaderField:@"Range"];
    self.conn = [NSURLConnection connectionWithRequest:request delegate:self];
    _downloading = YES;
}

/** 暫停下載 */
- (void)pause {
    [self.conn cancel];
    self.conn = nil;
    _downloading = NO;
}

#pragma mark - NSURLConnectionDataDelegate

/** 1. 收到伺服器回應時呼叫 */
- (void)connection:(NSURLConnection *)connection didReceiveResponse:(NSURLResponse *)response {
}

/** 2. 收到資料時呼叫(可能被呼叫多次,每次只帶部分資料) */
- (void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data {
    // 移動到本段該寫入的位置
    [self.writeHandle seekToFileOffset:self.begin + self.currentLength];
    [self.writeHandle writeData:data];

    self.currentLength += data.length;

    double progress = (double)self.currentLength / (self.end - self.begin);
    if (self.progressHandler) {
        self.progressHandler(progress);
    }
}

/** 3. 資料接收完畢 */
- (void)connectionDidFinishLoading:(NSURLConnection *)connection {
    self.currentLength = 0;
    [self.writeHandle closeFile];
    self.writeHandle = nil;
}

/** 4. 請求失敗(逾時、斷網等) */
- (void)connection:(NSURLConnection *)connection didFailWithError:(NSError *)error {
}

@end

多執行緒下載器:負責把檔案切段、建立與管理多個單執行緒下載器。一個多執行緒下載器只負責一個檔案。

// YYFileMultiDownloader.m
#import "YYFileMultiDownloader.h"
#import "YYFileSingleDownloader.h"

#define YYMaxDownloadCount 4

@interface YYFileMultiDownloader ()
@property (nonatomic, strong) NSMutableArray *singleDownloaders;
@property (nonatomic, assign) long long totalLength;
@end

@implementation YYFileMultiDownloader

/** 取得檔案大小 */
- (void)getFilesize {
    NSMutableURLRequest *request = [NSMutableURLRequest requestWithURL:[NSURL URLWithString:self.url]];
    request.HTTPMethod = @"HEAD";
    NSURLResponse *response = nil;
    [NSURLConnection sendSynchronousRequest:request returningResponse:&response error:nil];
    self.totalLength = response.expectedContentLength;
}

- (NSMutableArray *)singleDownloaders {
    if (!_singleDownloaders) {
        _singleDownloaders = [NSMutableArray array];

        [self getFilesize];

        // 每條執行緒的分攤下載量
        long long size = 0;
        if (self.totalLength % YYMaxDownloadCount == 0) {
            size = self.totalLength / YYMaxDownloadCount;
        } else {
            size = self.totalLength / YYMaxDownloadCount + 1;
        }

        // 建立 N 個下載器
        for (int i = 0; i < YYMaxDownloadCount; i++) {
            YYFileSingleDownloader *singleDownloader = [[YYFileSingleDownloader alloc] init];
            singleDownloader.url = self.url;
            singleDownloader.destPath = self.destPath;
            singleDownloader.begin = i * size;
            singleDownloader.end = singleDownloader.begin + size - 1;
            singleDownloader.progressHandler = ^(double progress) {
                NSLog(@"%d --- %f", i, progress);
            };
            [_singleDownloaders addObject:singleDownloader];
        }

        // 建立與伺服器檔案等大的暫存檔
        [[NSFileManager defaultManager] createFileAtPath:self.destPath contents:nil attributes:nil];
        NSFileHandle *handle = [NSFileHandle fileHandleForWritingAtPath:self.destPath];
        [handle truncateFileAtOffset:self.totalLength];
    }
    return _singleDownloaders;
}

/** 開始(恢復)下載 */
- (void)start {
    [self.singleDownloaders makeObjectsPerformSelector:@selector(start)];
    _downloading = YES;
}

/** 暫停下載 */
- (void)pause {
    [self.singleDownloaders makeObjectsPerformSelector:@selector(pause)];
    _downloading = NO;
}

@end

最後補充一個實務上的細節:如何取得要下載檔案的大小?用 HEAD 請求讀回應標頭裡的 expectedContentLength 即可。

要留意的是,多段下載能成立的前提是伺服器有回應 Range 標頭(即支援斷點續傳)。若伺服器忽略 Range 直接回 200 與整個檔案,多執行緒寫入就會互相覆蓋,因此正式導入前建議先確認伺服器行為,並在程式碼裡檢查回應狀態碼是否為 206。

  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved