您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

iOS 倒數計時按鈕 IDCountDownButton 實作(一)

編輯:iOS 開發綜合

「取得驗證碼」後的倒數計時按鈕幾乎是每個 App 的標配。本文示範一個 IDCountDownButton,用法與普通程序化 UIButton 幾乎一致:只要設定倒數秒數(不設定的話預設 60 秒),點擊後即開始倒數,倒數期間重複點擊不會重置,結束後才恢復可點擊狀態。

一、效果

二、實作思路

  • 覆寫 beginTrackingWithTouch:withEvent: 攔截點擊,依「是否正在倒數」決定要不要把事件繼續往下傳。
  • 用 NSTimer 每秒更新按鈕標題。
  • 倒數歸零時取消計時器並還原時長,讓按鈕重新具備觸發能力。
  • 在 dealloc 中同樣取消計時器,避免物件釋放後仍被計時器持有。

三、實作步驟

對外只暴露倒數時長:

@interface IDCountDownButton : UIButton
/** 驗證碼倒數的時長 */
@property (nonatomic, assign) NSInteger durationOfCountDown;
@end

內部則需要三個輔助狀態:原始標題、倒數剩餘值、計時器。

@interface IDCountDownButton ()
/** 保存未開始計時前的標題 */
@property (nonatomic, copy) NSString *originalTitle;
/** 保存倒數中的剩餘時長 */
@property (nonatomic, assign) NSInteger tempDurationOfCountDown;
/** 計時器 */
@property (nonatomic, strong) NSTimer *countDownTimer;
@end

覆寫 setTitle:forState:。關鍵在於:倒數過程中程式也會改寫標題,這些改動不能污染使用者設定的原始標題。利用 tempDurationOfCountDown 是否等於 durationOfCountDown 來判斷目前是否處於倒數中:

- (void)setTitle:(NSString *)title forState:(UIControlState)state {
    [super setTitle:title forState:state];
    // 倒數過程中標題的改變不更新 originalTitle
    if (self.tempDurationOfCountDown == self.durationOfCountDown) {
        self.originalTitle = title;
    }
}

覆寫 setDurationOfCountDown:,同步把剩餘值設為總時長。這兩個值相等就代表「目前沒有在倒數」:

- (void)setDurationOfCountDown:(NSInteger)durationOfCountDown {
    _durationOfCountDown = durationOfCountDown;
    self.tempDurationOfCountDown = _durationOfCountDown;
}

初始化時給定預設值。注意同時實作 initWithFrame: 與 initWithCoder:,前者對應程式化建立,後者對應 storyboard/xib:

- (instancetype)initWithFrame:(CGRect)frame {
    if (self = [super initWithFrame:frame]) {
        self.durationOfCountDown = 60;   // 預設 60 秒
        [self setTitle:@"獲取驗證碼" forState:UIControlStateNormal];
    }
    return self;
}

- (instancetype)initWithCoder:(NSCoder *)aDecoder {
    if (self = [super initWithCoder:aDecoder]) {
        self.durationOfCountDown = 60;
        [self setTitle:@"獲取驗證碼" forState:UIControlStateNormal];
    }
    return self;
}

攔截點擊:倒數中直接回傳 NO,不響應也不往下傳;否則啟動倒數並正常回傳:

- (BOOL)beginTrackingWithTouch:(UITouch *)touch withEvent:(UIEvent *)event {
    // 正在倒數 → 不響應
    if (self.tempDurationOfCountDown != self.durationOfCountDown) {
        return NO;
    }
    // 未開始 → 啟動倒數並傳遞事件
    [self startCountDown];
    return [super beginTrackingWithTouch:touch withEvent:event];
}

建立計時器。務必加入 RunLoop,否則計時器不會啟動:

- (void)startCountDown {
    self.countDownTimer = [NSTimer timerWithTimeInterval:1
                                                target:self
                                              selector:@selector(updateIDCountDownButtonTitle)
                                              userInfo:nil
                                               repeats:YES];
    [[NSRunLoop currentRunLoop] addTimer:self.countDownTimer
                                 forMode:NSRunLoopCommonModes];
}

每秒更新標題;歸零時還原標題、重置剩餘值並作廢計時器:

- (void)updateIDCountDownButtonTitle {
    if (self.tempDurationOfCountDown == 0) {
        [self setTitle:self.originalTitle forState:UIControlStateNormal];
        self.tempDurationOfCountDown = self.durationOfCountDown;
        [self.countDownTimer invalidate];
    } else {
        [self setTitle:[NSString stringWithFormat:@"%zd秒", self.tempDurationOfCountDown--]
              forState:UIControlStateNormal];
    }
}

別忘了收尾:

- (void)dealloc {
    [self.countDownTimer invalidate];
}

四、使用示範

@interface ViewController ()
/** 驗證碼倒數按鈕 */
@property (nonatomic, strong) IDCountDownButton *vertificationCodeIDCountDownButton;
@end
- (void)viewDidLoad {
    [super viewDidLoad];

    self.vertificationCodeIDCountDownButton =
        [[IDCountDownButton alloc] initWithFrame:CGRectMake(160, 204, 120, 44)];

    [self.vertificationCodeIDCountDownButton
        addTarget:self
           action:@selector(vertificationCodeIDCountDownButtonClick:)
 forControlEvents:UIControlEventTouchUpInside];

    [self.vertificationCodeIDCountDownButton setTitleColor:[UIColor whiteColor]
                                                 forState:UIControlStateNormal];
    [self.vertificationCodeIDCountDownButton setTitle:@"獲取驗證碼"
                                            forState:UIControlStateNormal];
    [self.vertificationCodeIDCountDownButton setBackgroundImage:[UIImage imageNamed:@"redButton"]
                                                      forState:UIControlStateNormal];

    self.vertificationCodeIDCountDownButton.durationOfCountDown = 10;

    [self.view addSubview:self.vertificationCodeIDCountDownButton];
}
- (void)vertificationCodeIDCountDownButtonClick:(UIButton *)button {
    // TODO:呼叫伺服器介面取得驗證碼
}

五、關於 AppIcon

加入 App 圖示時有幾個硬性規則:

1. 命名:以 Icon 開頭(首字母大寫),再接 @2x/@3x。

2. 尺寸:必須严格按對應的 pt 規格輸出。

3. 以 60pt 為例:

  • 2x:120 × 120 px
  • 3x:180 × 180 px
  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved