本文實作一個左右滑動的抽屜:手指跟著動,中間的主視圖會縮小並偏移,左右兩側的視圖則依方向自動切換顯示。核心技巧有三個——在 loadView 中預先佈局、用 touchesMoved 追蹤手指、再用 KVO 監聽 frame 變化決定要顯示哪一側。
抽屜的顯示邏輯取決於主視圖目前偏左還是偏右。若把這段判斷散落在每個改動 frame 的地方,很快就會難以維護。改為監聽 mainView 的 frame,讓「位置變化」自動觸發「該顯示哪一側」,職責就切乾淨了。
#import "DarwViewController.h"
@interface DarwViewController ()
@property (nonatomic, weak) UIView *leftView;
@property (nonatomic, weak) UIView *rightView;
@property (nonatomic, weak) UIView *mainView;
/** 動畫進行中,期間不處理 KVO 回呼 */
@property (nonatomic, assign) BOOL animating;
@end
@implementation DarwViewController
- (void)viewDidLoad {
[super viewDidLoad];
}
// 在 self.view 載入之前就把三層視圖都準備好
- (void)loadView {
self.view = [[UIView alloc] initWithFrame:[UIScreen mainScreen].bounds];
// 左側視圖
UIView *leftView = [[UIView alloc] initWithFrame:self.view.frame];
[self.view addSubview:leftView];
leftView.backgroundColor = [UIColor redColor];
self.leftView = leftView;
// 右側視圖
UIView *rightView = [[UIView alloc] initWithFrame:self.view.frame];
[self.view addSubview:rightView];
rightView.backgroundColor = [UIColor blueColor];
self.rightView = rightView;
// 主視圖(蓋在最上層)
UIView *mainView = [[UIView alloc] initWithFrame:self.view.frame];
[self.view addSubview:mainView];
mainView.backgroundColor = [UIColor yellowColor];
self.mainView = mainView;
// 監聽主視圖的 frame
[self.mainView addObserver:self
forKeyPath:@"frame"
options:NSKeyValueObservingOptionNew
context:nil];
}
/**
* 當 mainView 的 frame 改變時觸發
*/
- (void)observeValueForKeyPath:(NSString *)keyPath
ofObject:(id)object
change:(NSDictionary<NSString *, id> *)change
context:(void *)context {
if (self.animating) return; // 動畫期間跳過,避免與動畫互相打架
if (self.mainView.frame.origin.x > 0) {
// 主視圖右移 → 露出左側
self.rightView.hidden = YES;
self.leftView.hidden = NO;
} else if (self.mainView.frame.origin.x < 0) {
// 主視圖左移 → 露出右側
self.leftView.hidden = YES;
self.rightView.hidden = NO;
}
}
#pragma mark - 觸摸事件
- (void)touchesMoved:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event {
UITouch *touch = [touches anyObject];
CGPoint currentPoint = [touch locationInView:self.view];
CGPoint previousPoint = [touch previousLocationInView:self.view];
// 這一幀在 x 方向的位移
CGFloat offsetX = currentPoint.x - previousPoint.x;
self.mainView.frame = [self rectWithOffsetX:offsetX];
}
#define screenW [UIScreen mainScreen].bounds.size.width
#define screenH [UIScreen mainScreen].bounds.size.height
/**
* 依 x 位移計算新的 frame
* 除了平移,還會依偏移量做縮放,做出「拉開時主視圖往後退」的景深效果
*/
- (CGRect)rectWithOffsetX:(CGFloat)offsetX {
// y 方向的位移與 x 相關,偏移越多、上下留白越大
CGFloat offsetY = (screenH * 1 / 5) * (offsetX / screenW);
// 縮放比例:留白變多,視圖就變小
CGFloat scale = (screenH - offsetY * 2) / screenH;
// 若 x 為負(露出右側),比例要反過來算
if (self.mainView.frame.origin.x < 0) {
scale = 2 - scale;
}
CGRect frame = self.mainView.frame;
// 限制最大尺寸,避免超出螢幕
frame.size.width = frame.size.width * scale > screenW ? screenW : frame.size.width * scale;
frame.size.height = frame.size.height * scale > screenH ? screenH : frame.size.height * scale;
frame.origin.x += offsetX;
frame.origin.y = (screenH - frame.size.height) * 0.5; // 垂直居中
return frame;
}
#define maxRightX (screenW * 0.8) // 左側抽屜全開時的 x
#define maxLeftX (-screenW * 0.6) // 右側抽屜全開時的 x
- (void)touchesEnded:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event {
CGFloat targetX = 0;
// 主視圖大部分在右半邊 → 定位到左側抽屜
if (self.mainView.frame.origin.x > screenW * 0.5) {
targetX = maxRightX;
}
// 主視圖大部分在左半邊 → 定位到右側抽屜
else if (CGRectGetMaxX(self.mainView.frame) < screenW * 0.5) {
targetX = maxLeftX;
}
CGFloat offsetX = targetX - self.mainView.frame.origin.x;
self.animating = YES;
[UIView animateWithDuration:0.4 animations:^{
if (targetX == 0) {
// 復位
self.mainView.frame = self.view.frame;
} else {
// 吸附到指定位置
self.mainView.frame = [self rectWithOffsetX:offsetX];
}
} completion:^(BOOL finished) {
self.animating = NO;
}];
}
@end
animating 旗標為什麼必要。動畫執行的 0.4 秒內,frame 每幀都在變,KVO 會被連續觸發。此時去改 hidden 會造成左右視圖瘋狂閃爍。加一個旗標把動畫期間排除掉,問題就消失了。另外,dealloc 中別忘了 removeObserver:forKeyPath:。
為什麼在 loadView 而不是 viewDidLoad。loadView 是 view 被建立的直接責任歸屬,在這裡指定 self.view 並完成三層佈局,能確保後續任何程式碼拿到的都是最終狀態。
縮放比例的方向判斷。往右拖(offsetX > 0)時 mainView 變小;往左拖時 x 為負,若沿用同一公式會算出大於 1 的比例,所以用 2 - scale 反轉。這是這段程式最容易寫錯的地方。
實作上還可以補上 touchesCancelled 的處理(目前只有 touchesEnded),否則來電或手勢被系統攔截時,主視圖會停在半路。