您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

自訂 UICollectionViewFlowLayout:打造具備 3D 翻轉效果的圖片瀏覽器

編輯:iOS 開發綜合

以前做瀑布流時用過 UICollectionView,但當時只是套用系統內建的 UICollectionViewFlowLayout。後來看到自訂 FlowLayout 的相關文章,於是動手做了一個圖片瀏覽 Demo,順便把自訂布局的幾個關鍵方法摸熟。

效果是:水平捲動時,遠離中央的項目會逐漸縮小、加上 Y 軸旋轉與降低透明度,捲動停止後自動吸附到置中。

自訂 Layout 類別

#import <UIKit/UIKit.h>

@interface JWCollectionViewFlowLayout : UICollectionViewFlowLayout
@end

自訂的做法是繼承 UICollectionViewFlowLayout,然後覆寫四個方法。

#define screenWidth [UIScreen mainScreen].bounds.size.width
#define MaxChangeRange 100

#import "JWCollectionViewFlowLayout.h"

@implementation JWCollectionViewFlowLayout

// 1. 基礎設定
-(void)prepareLayout {
    self.scrollDirection = UICollectionViewScrollDirectionHorizontal;
    self.itemSize = CGSizeMake(300, 500);
}

// 2. 告訴系統:bounds 改變時必須重新計算布局(捲動動畫的來源)
- (BOOL)shouldInvalidateLayoutForBoundsChange:(CGRect)newBounds {
    return YES;
}

// 3. 核心:逐一調整每個 item 的 transform
- (nullable NSArray<__kindof UICollectionViewLayoutAttributes *> *)layoutAttributesForElementsInRect:(CGRect)rect {
    NSArray *array = [super layoutAttributesForElementsInRect:rect];

    // 目前可見區域(注意 y 固定為 0,因為是水平捲動)
    CGRect visibleRect = CGRectMake(self.collectionView.contentOffset.x, 0,
                                    self.collectionView.bounds.size.width,
                                    self.collectionView.bounds.size.height);

    for (UICollectionViewLayoutAttributes *attr in array) {
        if (CGRectIntersectsRect(attr.frame, rect)) {
            BOOL isAtRight = YES;
            CGFloat distance = attr.center.x - CGRectGetMidX(visibleRect);
            if (distance < 0) {
                distance = -distance;
                isAtRight = NO;
            }

            // 依距離算出比例:離中央越遠越小
            CGFloat precent;
            if (distance < 180) {
                precent = 1.0;
            } else {
                precent = ((screenWidth / 2) - distance) / (screenWidth / 2);
            }
            if (precent < 0.5) { precent = 0.5; }   // 限制最小比例,避免完全消失

            // 透視效果:m34 是 3D 透視矩陣的關鍵
            CATransform3D transform = CATransform3DIdentity;
            transform.m34 = 1.0 / 600;

            transform = CATransform3DScale(transform, 1, precent, 1);

            // 依左右側決定 Y 軸旋轉方向
            CGFloat p = isAtRight ? M_PI_4 : -M_PI_4;
            transform = CATransform3DRotate(transform, p * (1 - precent), 0, 1, 0);

            attr.transform3D = transform;
            attr.zIndex = 1;
            attr.alpha = precent;
        }
    }
    return array;
}

// 4. 捲動停止後的吸附位置
- (CGPoint)targetContentOffsetForProposedContentOffset:(CGPoint)proposedContentOffset
                                   withScrollingVelocity:(CGPoint)velocity {
    CGFloat offset = MAXFLOAT;
    CGFloat hCenter = proposedContentOffset.x + (CGRectGetWidth(self.collectionView.bounds) / 2.0);

    CGRect currentRect = CGRectMake(proposedContentOffset.x, 0,
                                    self.collectionView.bounds.size.width,
                                    self.collectionView.bounds.size.height);
    NSArray *array = [super layoutAttributesForElementsInRect:currentRect];

    for (UICollectionViewLayoutAttributes *layoutAttributes in array) {
        CGFloat itemHorizontalCenter = layoutAttributes.center.x;
        // 找出距離中心最近的項目
        if (ABS(itemHorizontalCenter - hCenter) < ABS(offset)) {
            offset = itemHorizontalCenter - hCenter;
        }
    }

    return CGPointMake(proposedContentOffset.x + offset, proposedContentOffset.y);
}

使用方式

-(void)setupUI {
    JWCollectionViewFlowLayout *flowLayout = [[JWCollectionViewFlowLayout alloc] init];

    UICollectionView *imgBrowseView = [[UICollectionView alloc] initWithFrame:self.view.bounds
                                                         collectionViewLayout:flowLayout];
    imgBrowseView.dataSource = self;
    imgBrowseView.delegate = self;
    imgBrowseView.backgroundColor = [UIColor whiteColor];
    [self.view addSubview:imgBrowseView];
    _imgBrowseView = imgBrowseView;

    [self.imgBrowseView registerNib:[UINib nibWithNibName:@"CustumCollectionViewCell" bundle:nil]
             forCellWithReuseIdentifier:@"cell"];
}

Demo:https://github.com/jiangtaidi/JWImageBrowseDemo.git

三個關鍵觀念

為什麼要回傳 YES 給 shouldInvalidateLayoutForBoundsChange:?因為我們的效果完全依賴 contentOffset。若回傳 NO,捲動過程中布局不會重算,縮放與旋轉就不會發生。這幾乎是所有「隨捲動變形」效果的起點。

transform.m34 在做什麼?它是 3D 透視矩陣中的透視除法項。設為 1.0 / -500 到 1.0 / 1000 之間的值時,能製造出適度的遠近感;設為 0 則完全沒有透視,旋轉看起來只是單純壓扁。數值絕對值越小,透視越強烈。

為什麼要覆寫 targetContentOffsetForProposedContentOffset:?不覆寫的話,使用者放手後畫面會停在任意位置,可能兩個項目都半置中。覆寫它並找出「離中心最近的那一個」,就能實現吸附效果。這個方法在 UICollectionViewFlowLayout 的公私文件中屬於少數被公開推薦覆寫的方法之一,做輪播、卡片堆疊時幾乎都會用到。

另外提醒一個實務細節:這裡的 precent 是拼字錯誤(應為 percent),複製程式碼時建議一併更正,以免後續維護時造成混淆。

以上就是本文的全部內容,希望對大家的學習有所幫助。

  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved