Foundation 裡最常用的幾個類別:NSString、NSArray、NSSet、NSDictionary,以及它們各自的子類 NSMutableString、NSMutableArray、NSMutableSet、NSMutableDictionary。命名規則很一致——父類不可變,子類可變,而子類繼承父類後自然能用父類的所有方法。此外還有 NSDate、NSObject 等基礎類別。
// 無參數
NSString *str2 = [[NSString alloc] initWithString:@"Jack"];
// 帶格式參數
NSString *str3 = [[NSString alloc] initWithFormat:@"age is %d", 10];
// C 字串 → OC 字串
NSString *str4 = [[NSString alloc] initWithUTF8String:"Rose"];
// OC 字串 → C 字串
const char *c = [str4 UTF8String];
// 讀取檔案(指定路徑)
NSString *str5 = [[NSString alloc] initWithContentsOfFile:@"/Users/apple/Desktop/getWeather.xml"
encoding:NSUTF8StringEncoding
error:nil];
// 讀取檔案(指定 URL)
// 本地:file:// 網路:https:// 伺服器:ftp://
NSURL *url = [[NSURL alloc] initWithString:@"file:///Users/apple/Desktop/getWeather.xml"];
NSString *str6 = [[NSString alloc] initWithContentsOfURL:url
encoding:NSUTF8StringEncoding
error:nil];
NSString *str2 = [NSString stringWithString:@"Jack"];
NSString *str3 = [NSString stringWithFormat:@"age is %d", 10];
NSString *str4 = [NSString stringWithUTF8String:"Rose"];
NSString *str5 = [NSString stringWithContentsOfFile:@"/Users/apple/Desktop/getWeather.xml"
encoding:NSUTF8StringEncoding
error:nil];
NSURL *url = [NSURL URLWithString:@"file:///Users/apple/Desktop/getWeather.xml"];
NSString *str6 = [NSString stringWithContentsOfURL:url
encoding:NSUTF8StringEncoding
error:nil];
同一功能有物件方法與類方法兩種寫法,而類方法更簡潔(且由 autorelease pool 管理,不必操心釋放),因此實務上推薦用類方法。使用中文內容時,編碼一律指定 NSUTF8StringEncoding。
// 寫入前會先清空原檔案內容
[@"Java,iOS" writeToFile:@"/Users/apple/Desktop/getWeather.xml"
atomically:YES
encoding:NSUTF8StringEncoding
error:nil];
NSString *content = @"iOS,Java";
NSURL *url = [NSURL fileURLWithPath:@"/Users/apple/Desktop/getWeather.xml"];
[content writeToURL:url atomically:YES encoding:NSUTF8StringEncoding error:nil];
atomically:YES 的意思是先寫到暫存檔再改名,寫入失敗時原檔不會被破壞。除非確定要追求效能,否則建議保持為 YES。
可變與不可變的本質差異,在拼接字串時看得最清楚:
NSString *str = [NSString stringWithFormat:@"My age is 10 "];
NSString *str2 = [str stringByAppendingString:@"11 12"];
NSLog(@"%@", str2); // My age is 10 11 12(str 本身沒變,str2 是新物件)
NSMutableString *mutStr = [NSMutableString stringWithFormat:@"My age is 10 "];
[mutStr appendString:@"11 12"]; // 無回傳值,直接在自身後面接上
NSLog(@"%@", mutStr); // My age is 10 11 12
刪除內容有兩種方式:
// 方式一:自己算 location 與 length(不推薦,位置一改就錯)
// [mutStr deleteCharactersInRange:NSMakeRange(13, 2)];
// 方式二:先取得範圍再刪除
NSRange range = [mutStr rangeOfString:@"11"];
[mutStr deleteCharactersInRange:range];
NSLog(@"%@", mutStr); // My age is 10 12
*。// 建立
NSArray *array1 = [NSArray arrayWithObjects:@"Jack", @"Rose", nil]; // nil 是結束標記
NSArray *array2 = @[@"Jack", @"Rose"]; // 推薦語法
// 長度
NSUInteger count = [array1 count];
// 取值(兩種寫法)
NSString *a = [array1 objectAtIndex:0];
NSString *b = array1[0]; // 編譯器特性,本質等同上一行
注意 arrayWithObjects: 以 nil 作為結束標記,這也代表 OC 陣列不能存放 nil。若需要「空值」語意,改用 NSNull。
// 1. 索引 for 迴圈,可用 break 中途離開
for (int i = 0; i < array1.count; i++) {
NSLog(@"%@", array1[i]);
if (i == 0) break;
}
// 2. 快速枚舉
for (id obj in array1) {
NSUInteger index = [array1 indexOfObject:obj];
NSLog(@"%ld-->%@", index, obj);
}
// 3. Block 枚舉,可透過 stop 提前結束
[array1 enumerateObjectsUsingBlock:^(id obj, NSUInteger idx, BOOL *stop) {
NSLog(@"%ld-->%@", idx, obj);
if (idx == 0) {
*stop = YES;
}
}];
第三種方式在需要同時拿到索引與物件、或想在特定條件下跳出時最方便。要注意 Block 內對 self 的使用可能造成循環引用,這時候要用 __weak 打破。
NSMutableArray *mutableArray = [NSMutableArray array];
// 注意:@[] 產生的是不可變 NSArray,不能直接指定給可變變數
Person *person = [[Person alloc] init];
[mutableArray addObject:person];
[mutableArray addObject:@"Jack"];
[mutableArray addObject:@"John"];
// [mutableArray addObject:10]; // 錯:不能放基本型別
[mutableArray removeObject:@"John"];
[mutableArray removeObjectAtIndex:0];
[mutableArray removeAllObjects];
NSSet *set2 = [NSSet setWithObjects:@"Jack", @"Rose", @"Jim", nil];
NSString *str = [set2 anyObject]; // 隨機取一個
NSMutableSet *mutableSet = [NSMutableSet set];
[mutableSet addObject:@"Jack"];
[mutableSet addObject:@"Rose"];
[mutableSet removeObject:@"Jack"];
containsObject: 的查詢速度接近常數時間,且天生處理重複元素。實務上若你需要「去重」或「大量存在性判斷」,用 NSSet;若順序對使用者有意義(例如列表顯示),用 NSArray。字典以 key/value 成對存在,本身不可變且無序。key 若重複,後者會覆蓋前者;value 則允許重複。
// 建立方式一:空字典
NSDictionary *dic = [NSDictionary dictionary];
// 方式二:一組 key/value
NSDictionary *dic1 = [NSDictionary dictionaryWithObject:@"Jack" forKey:@"name"];
// 方式三:以陣列批次指定
NSArray *keys = @[@"name", @"address", @"e-mail"];
NSArray *values = @[@"Jack", @"北京", @"jack@163.com"];
NSDictionary *dic3 = [NSDictionary dictionaryWithObjects:values forKeys:keys];
// 方式四:交錯排列
NSDictionary *dic4 = [NSDictionary dictionaryWithObjectsAndKeys:
@"Jack", @"name",
@"北京", @"address",
@"jack@163.com", @"e-mail", nil];
// 方式五:字面語法(推薦)
NSDictionary *dic5 = @{@"name": @"Jack",
@"address": @"北京",
@"e-mail": @"jack@163.com"};
// 取值與長度
NSString *name = [dic1 objectForKey:@"name"];
NSUInteger cnt = dic5.count;
// 方式一:先取全部 key(順序不定)
NSArray *allKeys = [dic5 allKeys];
for (int i = 0; i < dic5.count; i++) {
NSString *key = allKeys[i];
NSLog(@"%@-->%@", key, dic5[key]);
}
// 方式二:Block 直接拿到 key 與 value
[dic5 enumerateKeysAndObjectsUsingBlock:^(id key, id obj, BOOL *stop) {
NSLog(@"%@-->%@", key, obj);
*stop = YES;
}];
NSMutableDictionary *mutableDic = [NSMutableDictionary dictionary];
// 注意:@{...} 右邊回傳的是不可變字典,不能指定給可變變數
[mutableDic setObject:@"Rose" forKey:@"name"];
[mutableDic setObject:@"北京" forKey:@"address"];
[mutableDic removeObjectForKey:@"name"];
[mutableDic removeAllObjects];
NSLog(@"%@", mutableDic); // address = "\U5317\U4eac"; name = Rose;
輸出中的 \U5317\U4eac 就是「北京」的 UTF-16 轉義表示,這是 description 方法的正常行為,不是亂碼。
NSArray *friends = @[
@{@"name": @"張三", @"phone": @"13993214321", @"address": @"北京"},
@{@"name": @"李斯", @"phone": @"13498766789", @"address": @"上海"},
@{@"name": @"王武", @"phone": @"15898766789", @"address": @"天津"},
@{@"name": @"趙柳", @"phone": @"18798766789", @"address": @"南京"}
];
// 取出「李斯」的資料
NSDictionary *dic = friends[1];
NSLog(@"%@", dic);
這個「陣列裝字典」的組合是 iOS 開發中最常見的資料結構,特別是在處理 JSON 回應時——最外層陣列對應列表,每個字典對應一筆紀錄。理解它的嵌套關係,是後續做 Model 轉換的基礎。