您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

iOS 流媒體開發:滑動手勢控制音量、亮度與播放進度

編輯:iOS 開發綜合

在流媒體播放器中,用戶往往希望能像主流播放器那樣,透過在畫面上滑動來調節音量、亮度與播放進度。本文將示範如何自定義一個透明 UIButton 來捕捉滑動手勢,並透過代理把事件回傳給頁面。

自定義 UIButton

我們需要在視頻上疊加一個透明的 button 來捕捉並響應用戶的點擊與滑動事件,同時在 .h 中聲明一個代理,把自定義 button 的響應事件傳遞給相應頁面。程式碼如下:

.h 文件

#import <UIKit/UIKit.h>

@protocol WBYButtonDelegate <NSObject>
/**
 * 開始觸摸
 */
- (void)touchesBeganWithPoint:(CGPoint)point;
/**
 * 結束觸摸
 */
- (void)touchesEndWithPoint:(CGPoint)point;
/**
 * 移動手指
 */
- (void)touchesMoveWithPoint:(CGPoint)point;
@end

@interface WBYButton : UIButton
/**
 * 傳遞點擊事件的代理
 */
@property (weak, nonatomic) id <WBYButtonDelegate> touchDelegate;
@end

.m 文件

#import "WBYButton.h"

@implementation WBYButton
// 觸摸開始
- (void)touchesBegan:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event {
    [super touchesBegan:touches withEvent:event];
    // 獲取觸摸開始的坐標
    UITouch *touch = [touches anyObject];
    CGPoint currentP = [touch locationInView:self];
    [self.touchDelegate touchesBeganWithPoint:currentP];
}
// 觸摸結束
- (void)touchesEnded:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event {
    [super touchesEnded:touches withEvent:event];
    UITouch *touch = [touches anyObject];
    CGPoint currentP = [touch locationInView:self];
    [self.touchDelegate touchesEndWithPoint:currentP];
}
// 移動
- (void)touchesMoved:(NSSet<UITouch *> *)touches withEvent:(nullable UIEvent *)event {
    UITouch *touch = [touches anyObject];
    CGPoint currentP = [touch locationInView:self];
    [self.touchDelegate touchesMoveWithPoint:currentP];
}
@end

之所以選擇 UIButton,有兩點原因:一是無需手動開啟 userInteractionEnabled 用戶交互;二是可以很方便地為 UIButton 添加 Target,不必像 UIView 那樣再定義一個 UITapGestureRecognizer。此外,為 UIButton 設置各種狀態的背景顏色與背景圖,也要比 UIView 方便得多。

將自定義 Button 添加到視頻上

// 添加自定義的 Button 到視頻畫面上
self.button = [[WBYButton alloc] initWithFrame:playerLayer.frame];
self.button.touchDelegate = self;
[playerView addSubview:self.button];

在代理方法中改變音量、亮度和進度

首先定義一枚舉表示上下左右,這裡只需判斷手指是上下滑動還是左右滑動。

typedef NS_ENUM(NSUInteger, Direction) {
    DirectionLeftOrRight,
    DirectionUpOrDown,
    DirectionNone
};

同時聲明一個表示方向的變量、一個記錄用戶觸摸視頻時坐標的變量、一個記錄觸摸時亮度和音量大小的變量,以及一個記錄播放進度的變量。

@property (assign, nonatomic) Direction direction;
@property (assign, nonatomic) CGPoint startPoint;
@property (assign, nonatomic) CGFloat startVB;
@property (assign, nonatomic) CGFloat startVideoRate;

剛開始觸摸視頻的代理

當用戶首次觸摸視頻時,記錄首次觸摸的坐標、當前音量或亮度、當前播放進度。為了取得當前音量,需先定義 MPVolumeView 與 UISlider。

@property (strong, nonatomic) MPVolumeView *volumeView;// 控制音量的 view
@property (strong, nonatomic) UISlider *volumeViewSlider;// 控制音量
// 設置 self.volumeView 的 frame
self.volumeView.frame = CGRectMake(0, 0, self.view.frame.size.width, self.view.frame.size.width * 9.0 / 16.0);
在 getter 方法中初始化:
- (MPVolumeView *)volumeView {
    if (_volumeView == nil) {
        _volumeView = [[MPVolumeView alloc] init];
        [_volumeView sizeToFit];
        for (UIView *view in [_volumeView subviews]){
            if ([view.class.description isEqualToString:@"MPVolumeSlider"]){
                self.volumeViewSlider = (UISlider*)view;
                break;
            }
        }
    }
    return _volumeView;
}

然後在開始觸摸的代理裡記錄

#pragma mark - 開始觸摸
- (void)touchesBeganWithPoint:(CGPoint)point {
    // 記錄首次觸摸坐標
    self.startPoint = point;
    // 檢測用戶觸摸屏幕的左邊還是右邊,以此判斷要調節音量還是亮度:左邊是亮度,右邊是音量
    if (self.startPoint.x <= self.button.frame.size.width / 2.0) {
        // 亮度
        self.startVB = [UIScreen mainScreen].brightness;
    } else {
        // 音量
        self.startVB = self.volumeViewSlider.value;
    }
    CMTime ctime = self.avPlayer.currentTime;
    self.startVideoRate = ctime.value / ctime.timescale / self.total;
}

接著在拖動的代理方法裡改變音量、亮度和進度

#pragma mark - 拖動
- (void)touchesMoveWithPoint:(CGPoint)point {
    // 得出手指在 Button 上移動的距離
    CGPoint panPoint = CGPointMake(point.x - self.startPoint.x, point.y - self.startPoint.y);
    // 分析出用戶滑動的方向
    if (self.direction == DirectionNone) {
        if (panPoint.x >= 30 || panPoint.x <= -30) {
            // 進度
            self.direction = DirectionLeftOrRight;
        } else if (panPoint.y >= 30 || panPoint.y <= -30) {
            // 音量和亮度
            self.direction = DirectionUpOrDown;
        }
    }
    if (self.direction == DirectionNone) {
        return;
    } else if (self.direction == DirectionUpOrDown) {
        // 音量和亮度
        if (self.startPoint.x <= self.button.frame.size.width / 2.0) {
            // 調節亮度
            if (panPoint.y < 0) {
                // 增加亮度
                [[UIScreen mainScreen] setBrightness:self.startVB + (-panPoint.y / 30.0 / 10)];
            } else {
                // 減少亮度
                [[UIScreen mainScreen] setBrightness:self.startVB - (panPoint.y / 30.0 / 10)];
            }
        } else {
            // 音量
            if (panPoint.y < 0) {
                // 增大音量
                [self.volumeViewSlider setValue:self.startVB + (-panPoint.y / 30.0 / 10) animated:YES];
                if (self.startVB + (-panPoint.y / 30 / 10) - self.volumeViewSlider.value >= 0.1) {
                    [self.volumeViewSlider setValue:0.1 animated:NO];
                    [self.volumeViewSlider setValue:self.startVB + (-panPoint.y / 30.0 / 10) animated:YES];
                }
            } else {
                // 減少音量
                [self.volumeViewSlider setValue:self.startVB - (panPoint.y / 30.0 / 10) animated:YES];
            }
        }
    } else if (self.direction == DirectionLeftOrRight ) {
        // 進度
        CGFloat rate = self.startVideoRate + (panPoint.x / 30.0 / 20.0);
        if (rate > 1) {
            rate = 1;
        } else if (rate < 0) {
            rate = 0;
        }
    }
}

注意事項:1. 前面提到增大音量的一個 bug,此處的解法是——若偵測到用戶設置的音量比系統當前音量大於 0.1,表示此時設置已無效,於是先將音量設為 0.1,再設回原本無效的值即可,具體做法參考程式碼;2. 修改播放進度時,最好不要在移動方法中實時修改,一方面會造成卡頓,另一方面也沒必要,所以這裡只記錄用戶想調整的進度,等到觸摸結束時再統一設置;3. 改變音量會調用系統自帶的 UI 顯示音量大小,但改變亮度時系統並未提供相應 UI,需要自行添加,夥伴們可按專案需求自行設計。

觸摸結束的代理

#pragma mark - 結束觸摸
- (void)touchesEndWithPoint:(CGPoint)point {
    if (self.direction == DirectionLeftOrRight) {
        [self.avPlayer seekToTime:CMTimeMakeWithSeconds(self.total * self.currentRate, 1) completionHandler:^(BOOL finished) {
            // 在這裡處理進度設置成功後的事情
        }];
    }
}
  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved