您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 訊息 >> iOS 相關資訊

Xcode 開發疑難雜症(六):從 dangling else 到憑證地雷

編輯:iOS 相關資訊

61. 警告「add explicit braces to avoid dangling else」

所謂「危險的 else」,長得像這樣:

if (a == 10)
    printf("TEN");
else
    printf("NOT TEN");
a = 100;

編譯器之所以抱怨,是因為它判斷不出你的語意:a = 100 這行到底屬於 if/else 之後的獨立敘述(不論 a 是否為 10 都要執行),還是你想在 else 分支裡才做的事?

如果是前者,正確寫法是補上大括號:

if (a == 10) {
    printf("TEN");
} else {
    printf("NOT TEN");
}
a = 100;

如果是後者,則該把賦值放進 else 區塊:

if (a == 10) {
    printf("TEN");
} else {
    printf("NOT TEN");
    a = 100;
}

對 C/C++/Java 編譯器而言這只是風格問題,不影響編譯,而且編譯器實際會傾向第一種解讀。它之所以警告,是提醒你別讓程式碼留下歧義。想消掉這個警告,可以用 #pragma clang diagnostic ignored "-Wswitch" 這類方式,或把編譯選項裡的 Missing Braces and Parentheses 設為 NO。不過更推薦的作法永遠是把大括號補上。

62. iPad 模擬器看不到 Home 鍵

從 Xcode 4.3 起,為了換出更大的可用畫面空間,iPad 模擬器不再顯示 Home 鍵。你可以改用選單 Hardware → Home,或直接用快速鍵來代替。

63. No visible @interface for 'NSURL' declares the selector 'query'

這個方法在 iOS 6 已被捨棄,請改用 NSURL+Parameters 之類的替代方案。

64. Certificate identity 'iPhone Distribution' appears more than once

這是憑證重複導致的錯誤,得把鑰匙串裡重複的憑證刪掉才能編譯。惱人的是,重開 Xcode 之後那些刪掉的憑證又回來了——因為啟動時 Xcode 會把專案內的憑證重新匯入鑰匙串,所以單靠刪鑰匙串副本並不會有效。

這個 Xcode 老毛病讓不少人頭痛,但除了反覆(而且徒勞地)刪憑證,好像也沒別的辦法。其實也不能全怪 Xcode,它跟「iPhone 組態公用程式」兩邊都有關係。

Xcode 裡那些「殘留」憑證並不是以一般形式存在的。如果你裝了 iPhone 組態公用程式,這些憑證實際上位於 /Users/帳號/Library/MobileDevice/Applications/ 底下各個 .app 套件中——這些 .app 正是「iPhone 組態公用程式」的應用程式清單裡匯入的項目。用 Finder 執行「顯示套件內容」就能看到,其中名為 embedded.mobileprovision 的檔案就是重複的殘留憑證。你可以逐一刪除這些 .app,或者直接把該目錄下的 .app 全部清掉(反正只要專案還在,隨時都能重新編出 .app 再匯入公用程式)。最後別忘了把 Organizer 裡重複的憑證也刪一次,然後重啟 Xcode。

65. Application Identifier 'com.ydtf.*' which doesn't match the current setting 'com.ydtf.dlt'

如你所見,這兩個 Application ID 明明是匹配的(* 就是萬用字元),但這個莫名其妙的錯誤會讓你永遠編不過。這同樣是 Xcode 的 bug,解法是先把 Code Signing 改成 Don't Code Sign 編一次,再改回正確的簽章設定重新編。

66. The identity used to sign the executable is no longer valid.

這通常是前面簽章問題連帶造成的 Archive 失敗,處理方式同第 65 條。

67. 在 iPad 上調整 presentModalViewController 彈出視視窗的大小

TestViewController *testVC = [[TestViewController alloc] initWithNibName:@"TestViewController" bundle:nil];
testVC.modalPresentationStyle = UIModalPresentationFormSheet;
testVC.modalTransitionStyle = UIModalTransitionStyleCrossDissolve;
[self presentModalViewController:testVC animated:YES];

// 重點:一定要在 presentModalViewController 之後再設定 frame
testVC.view.superview.frame = CGRectMake(0, 0, 649, 397);
testVC.view.superview.center = self.view.center;

順序錯了就不會生效,請務必把 frame 設定放在 presentModalViewController: 之後。

68. 在 iPad 上自訂 ActionSheet 的按鈕與 Popover 箭頭方向

ActionSheet 在 iPad 上是以 Popover 形式呈現的,預設不顯示 cancelButton——SDK 用 Popover 以外的區域代替取消鍵,使用者點外面就等於按取消。如果你這樣初始化:

UIActionSheet *sheet = [[UIActionSheet alloc] initWithTitle:nil
                                                 delegate:self
                                        cancelButtonTitle:@"cancel"
                                   destructiveButtonTitle:@"ok"
                                        otherButtonTitles:nil];

最後只會看到紅色的 destructiveButton。

若你非要顯示 cancelButton,可以改寫成:

UIActionSheet *sheet = [[UIActionSheet alloc] initWithTitle:nil
                                                 delegate:self
                                        cancelButtonTitle:nil
                                   destructiveButtonTitle:nil
                                        otherButtonTitles:@"cancel", @"ok", nil];
// sheet.cancelButtonIndex = 0; 千萬不要設定這個
sheet.destructiveButtonIndex = 1;

指定 destructiveButtonIndex 之後,該鈕會顯示為紅色。但千萬別去設 cancelButtonIndex,因為在 iPad 上 cancelButton 會被直接移除。

另外,iPad 上 SDK 並未提供修改箭頭方向的 API,方向由系統自行判斷。但我們可以靠 showFromRect: 的第一個參數來「騙」它:

CGRect r = sender.bounds;
r.size.width = 2 * self.view.bounds.size.width;
r.origin.x = -self.view.bounds.size.width + sender.bounds.size.width / 2 + sender.frame.origin.x;
[sheet showFromRect:r inView:sender animated:YES];

這樣原本朝左的箭頭就會變成朝上。原理其實很樸素:iOS 判斷彈出方向時,就是看哪一邊有「足夠」的空間。當我們把三個方向都堵死,它也只能老實從我們想要的那一側彈出。

69. ASIHTTPRequest 中 setShowAccurateProgress = YES 沒有效果

必須在 networkQueue.showAccurateProgress = YES 之前先設定 request.showAccurateProgress = YES,否則不會生效:

request.showAccurateProgress = YES;
networkQueue.showAccurateProgress = YES;
[networkQueue setSuspended:YES];
[networkQueue addOperation:request];
networkQueue.uploadProgressDelegate = self;
[networkQueue go];

另外提醒,由於 CFNetwork 的一個 bug,資料量小於 128K 時無法追蹤精確的上傳/下載進度。

70. 如何讓 UIWebView 的背景透明?

在 Interface Builder 裡把 Background 設為 Clear Color 並不會真的讓它透明,你需要這兩行:

[webView setBackgroundColor:[UIColor clearColor]];
[webView setOpaque:NO];
  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved