您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

iOS 粒子系統剖析:CAEmitterLayer 的隨機性與發射方向

編輯:iOS 開發綜合

一、粒子系統的兩層結構

在 UIKit 中,粒子系統由兩部分組成。

CAEmitterCell:可視為單一粒子的原型。比如一團煙霧裡的一顆粉粒。系統每次要發射粒子時,會依這個原型加上隨機擾動,生成一個個略有差異的個體。原型上定義了圖片、顏色、方向、運動、縮放與生命週期等屬性。

CAEmitterLayer:通常只有一個。它負責控制粒子的發射形狀(點、矩形、圓形等)與發射位置(矩形內部、邊緣等),同時提供一組全域乘數,可以統一覆寫底下所有 cell 的變化。舉例來說,想讓整片雨絲被風吹斜,改這一層就够了。

結構簡單,參數卻很微妙——CAEmitterLayer 有三十多個可調項目。以下挑幾個容易搞錯的說明。

二、隨機性從哪裡來

CAEmitterCell 的屬性大多是成對出現的:一個平均值加一個範圍,例如 velocity 與 velocityRange。預設的範圍是 0,代表所有粒子完全一致。把範圍拉開之後,每顆粒子就會在這個區間內被隨機取值。Apple 的說法是:

Each layer has its own random number generator state. Emitter cell properties that are defined as a mean and a range, such as a cell's speed, the value of the properties are uniformly distributed in the interval [M - R/2, M + R/2].

也就是說,實際值均勻分布在中值 ± 範圍/2 之間。

三、發射方向由誰決定

CAEmitterCell 的 velocity 只給出「速度大小」,方向其實由 emissionLongitude 定義:

The emission longitude is the orientation of the emission angle in the xy-plane. It is also often referred to as the azimuth.

換句話說,想改粒子往哪飛,該動的是 emissionLongitude,而不是 velocity。

四、程式碼示範

下面的例子讓粒子持續發射,並用 KVC 動態改變發射角度,做出一個可調方向的噴射效果。

- (void)viewDidLoad {
    [super viewDidLoad];

    CAEmitterLayer *emitterLayer = [CAEmitterLayer layer];
    emitterLayer.emitterPosition = self.view.center;
    _emitterLayer = emitterLayer;
    [self.view.layer addSublayer:emitterLayer];

    CAEmitterCell *funnyEmitterCell = [CAEmitterCell emitterCell];
    funnyEmitterCell.contents   = (id)[UIImage imageNamed:@"funny.jpg"].CGImage;
    funnyEmitterCell.birthRate  = 10.0;
    funnyEmitterCell.velocity   = 200.0;
    funnyEmitterCell.lifetime   = 5.0;
    funnyEmitterCell.scale      = 0.1;
    funnyEmitterCell.name       = @"funny";   // 供 KVC 定位使用

    emitterLayer.emitterCells = [NSArray arrayWithObject:funnyEmitterCell];

    [self bumpAngle];

    UILabel *angleLabel = [[UILabel alloc] initWithFrame:CGRectMake(20, 20, 100, 30)];
    angleLabel.backgroundColor = [UIColor clearColor];
    [self.view addSubview:angleLabel];
    _angleLabel = angleLabel;
}

- (void)bumpAngle {
    NSNumber *emissionLongitude =
        [_emitterLayer valueForKeyPath:@"emitterCells.funny.emissionLongitude"];
    NSNumber *nextLongitude =
        [NSNumber numberWithFloat:[emissionLongitude floatValue] + 0.02];
    [_emitterLayer setValue:nextLongitude
                     forKeyPath:@"emitterCells.funny.emissionLongitude"];

    _angleLabel.text = [NSString stringWithFormat:@"%.0f degrees",
                        [nextLongitude floatValue] * 180 / M_PI];
    [self performSelector:@selector(bumpAngle) withObject:nil afterDelay:0.1];
}

這裡的關鍵是 cell 的 name 屬性:只有設了名字,才能用 emitterCells.funny.xxx 這樣的 key path 精準打到某一顆 cell 去改參數。

五、CAEmitterCell 必備屬性

birthRate:沒它就沒有粒子,必須設定,代表每秒產生的數量

lifetime 與 lifetimeRange:粒子在螢幕上停留多久

contents:設定粒子圖片,用法與 CALayer 一致

name:粒子名稱,搭配 setValue:forKeyPath: 使用

velocity、velocityRange、emissionRange:飛行速度、速度範圍與角度擴散

把 cell 放進陣列交給 emitterLayer.emitterCells 即可。另外 renderMode 設為 kCAEmitterLayerAdditive 時,粒子堆疊會產生火焰般的加色效果,很值得一試。

六、CAEmitterLayer 屬性清單

birthRate:粒子產生係數,預設 1.0

emitterCells:裝 CAEmitterCell 的陣列

emitterDepth:決定粒子形狀的深度關聯,與 emitterShape 搭配

emitterMode:發射模式,可選 kCAEmitterLayerPoints、Outline、Surface、Volume

emitterPosition:發射位置

emitterShape:發射源形狀,可選 Point、Line、Rectangle、Cuboid、Circle、Sphere

emitterSize:發射源尺寸

emitterZposition:發射源 z 座標

lifetime:粒子生命週期

preservesDepth:是否保留深度

renderMode:渲染模式,可選 Unordered、OldestFirst、OldestLast、BackToFront、Additive

scale:粒子縮放比例

seed:隨機數種子

spin:自旋速度

velocity:粒子速度

  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved