您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

CAMediaTiming 時間協議詳解:Core Animation 的八個時間屬性

編輯:iOS 開發綜合

CAAnimation 底層有一個關鍵協議叫 CAMediaTiming,CABasicAnimation 與 CAKeyframeAnimation 都建立在它之上。像 duration、beginTime、repeatCount 這些與時間有關的屬性,全都定義在這裡。

協議一共定義了 8 個屬性,它們彼此以某種方式組合,精確地控制著動畫的節奏。蘋果的官方文件對每個屬性只寫了寥寥數句,讀起來容易一知半解。本文試著把「時間」這件事講得更具體一些——想像一條時間軸,每一格代表一秒,動畫就在這條軸上從起點走到終點。

由於 CALayer 與 CAAnimation 都實作了 CAMediaTiming,理解這些屬性對寫 Core Animation 幾乎是必備功課。

八個屬性逐一拆解

1. repeatCount — 動畫重複次數,可設為小數。設為 HUGE_VALF 代表無限次重複。

2. repeatDuration — 動畫的總時長。若大於單次時長則重複播放,若小於單次時長則被截斷。

3. duration — 單次動畫的持續時間。

4. speed — 圖層或動畫相對於父層 CALayer 的時間流速。設為 2 就是兩倍速,設為 0 則時間凍結——這正是暫停動畫的原理。

5. fillMode — 動畫有效期結束後,呈現效果是凍結還是移除。

6. beginTime — 相對於父物件的開始時間,基準是系統的絕對時間:

/** 當前時間 2 秒後才開始動畫 */
keyFrameAnim.beginTime = CACurrentMediaTime() + 2;

/** 假設動畫已執行 2 秒(若這個值大於動畫時長,代表動畫其實早已結束) */
keyFrameAnim.beginTime = CACurrentMediaTime() - 2;

7. timeOffset — 時間軸偏移量,把時間軸挪到偏移位置再跑完整個動畫時長。例如動畫長 3 秒、偏移量設為 8,則起始位置相當於 8 % 3 = 2 秒處,跑完 3 秒後在整體時長的 1/3 位置結束。

8. CACurrentMediaTime — 回傳系統目前的絕對時間(自開機起算),單位為秒。它是 Core Animation 世界的「現在幾點」。

fillMode 的四種取值

/** 預設。動畫開始前不顯示,結束後移除。 */
kCAFillModeRemoved;

/** 動畫開始前不顯示,但結束後保留最終狀態。 */
kCAFillModeForwards;

/** 動畫開始前先顯示初始狀態,結束後移除。 */
kCAFillModeBackwards;

/** 開始前顯示初始狀態,結束後仍保留最終狀態。 */
kCAFillModeBoth;

實務上最常被忘記的就是這一段:動畫播完後模型層級會「啪」地跳回原樣,多半是因為沒設 kCAFillModeForwards。

實作:暫停與繼續動畫

利用 speed 與 timeOffset 的組合,就能做出真正的暫停/繼續:

- (IBAction)pauseBtnClicked:(id)sender {
    // 確認該圖層上是否有名為 position 的動畫
    if ([self.layer.presentationLayer animationForKey:@"position"]) {
        // 把絕對時間換算成圖層自身的本地時間
        CFTimeInterval localTime = [self.layer convertTime:CACurrentMediaTime() fromLayer:nil];

        self.layer.speed = 0;          // 時間流速歸零 → 暫停
        self.layer.timeOffset = localTime;  // 記住停在哪裡
    }
}

- (IBAction)continueBtnClicked:(id)sender {
    if ([self.layer.presentationLayer animationForKey:@"position"]) {
        CFTimeInterval timeOffset = self.layer.timeOffset;
        self.layer.timeOffset = 0;     // 重置偏移
        self.layer.speed = 1;          // 恢復正常流速

        self.layer.beginTime = 0;

        CFTimeInterval localTime = [self.layer convertTime:CACurrentMediaTime() fromLayer:nil];
        CFTimeInterval timeSincePause = localTime - timeOffset;

        self.layer.beginTime = timeSincePause;   // 從上次暫停處接續
    }
}

核心概念其實只有一句:speed = 0 讓時間停止流動,timeOffset 記住進度,恢復時再把兩者還原並重新對齊 beginTime。

以上就是本文的全部內容,希望能幫助到大家。

  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved