您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

iOS 自定義儀表盤:Quartz2D 繪製刻度與 CAKeyframeAnimation 驅動指針

編輯:iOS 開發綜合

這篇帶來一個自定義儀表盤的完整實現,涵蓋兩塊內容:用 Quartz2D 畫表盤與刻度,用動畫驅動指針按指定方向旋轉。

技術要點

Demo 依賴 QuartzCore,先自定義一個 UIView 子類。

 // Gauge.h // GaugeDemo // // Created by 海鋒 周 on 12-3-27. // Copyright (c) 2012年 CJLU rights reserved. // #import <UIKit/UIKit.h> #import <QuartzCore/QuartzCore.h> @interface Gauge : UIView { UIImage *gaugeView; UIImageView *pointer; CGFloat maxNum; CGFloat minNum; CGFloat maxAngle; CGFloat minAngle; CGFloat gaugeValue; CGFloat gaugeAngle; CGFloat angleperValue; CGFloat scoleNum; NSMutableArray *labelArray; CGContextRef context; } @property (nonatomic,retain) UIImage *gaugeView; @property (nonatomic,retain) UIImageView *pointer; @property (nonatomic,retain) NSMutableArray *labelArray; @property (nonatomic) CGContextRef context; -(void)setGaugeValue:(CGFloat)value animation:(BOOL)isAnim; @end

指針旋轉依賴 CATransform3DRotate,所以務必把 QuartzCore 框架加進工程。另外在旋轉之前,需要先把 pointer.layer.anchorPoint 移到合適的樞紐位置,否則會繞着中心轉而不是繞着軸心轉。

動畫這裡刻意不用 CABasicAnimation 而用 CAKeyframeAnimation,原因有兩個:一是 CABasicAnimation 的 toValue 默認走最短路徑,當旋轉超過 180° 時無法控制方向;二是關鍵幀便於在末尾追加一段左右擺動的回彈效果,指針到位後輕微晃動更貼近真實儀錶。

表盤本體用 Quartz2D 繪製:先通過 UIGraphicsGetCurrentContext() 拿到畫布,再借助三角函數計算出均勻分布的刻度座標與文字位置。

Gauge.m

 // Gauge.m // GaugeDemo // // Created by 海鋒 周 on 12-3-27. // Copyright (c) 2012年 CJLU. All rights reserved. // #import "Gauge.h" #import <QuartzCore/QuartzCore.h> #define MAXOFFSETANGLE 120.0f #define POINTEROFFSET 90.0f #define MAXVALUE 120.0f #define CELLMARKNUM 5 #define CELLNUM 12 #define GAUGESTRING @"單位:Km/h" #define DEFLUATSIZE 300 /************************************************ 儀表盤的大小不建議設置的太小。 長寬都是300是最適合的 如果要更小的需要自行修改刻度長度和文字大小 ---powered by 周海鋒 2012-3-29 ***********************************************/ @implementation Gauge @interface Gauge (private) - (CGFloat) parseToX:(CGFloat) radius Angle:(CGFloat)angle; - (CGFloat) parseToY:(CGFloat) radius Angle:(CGFloat)angle; - (CGFloat) transToRadian:(CGFloat)angel; - (CGFloat) parseToAngle:(CGFloat) val; - (CGFloat) parseToValue:(CGFloat) val; - (void)setTextLabel:(NSInteger)labelNum; - (void)setLineMark:(NSInteger)labelNum; - (void) pointToAngle:(CGFloat) angle Duration:(CGFloat) duration; @end @synthesize gaugeView,pointer,context; @synthesize labelArray; - (id)initWithFrame:(CGRect)frame { self = [super initWithFrame:frame]; if (self) { //設置背景透明 [self setBackgroundColor:[UIColor clearColor]]; scoleNum = DEFLUATSIZE/frame.size.width; maxNum = MAXVALUE; minNum = 0.0f; minAngle = -MAXOFFSETANGLE; maxAngle = MAXOFFSETANGLE; gaugeValue = 0.0f; gaugeAngle = -MAXOFFSETANGLE; angleperValue = (maxAngle - minAngle)/(maxNum - minNum); gaugeView= [UIImage imageNamed:@"gaugeback.png"]; //添加指針 UIImage *_pointer = [UIImage imageNamed:@"pointer2.png"]; pointer = [[UIImageView alloc] initWithImage:_pointer]; pointer.layer.anchorPoint = CGPointMake(0.5, 0.78); pointer.center = self.center; pointer.transform = CGAffineTransformMakeScale(scoleNum, scoleNum); [self addSubview:pointer]; //設置文字標簽 [self setTextLabel:CELLNUM]; //設置指針到0位置 pointer.layer.transform = CATransform3DMakeRotation([self transToRadian:-MAXOFFSETANGLE], 0, 0, 1); } return self; } /* * setTextLabel 繪制刻度值 * @labelNum NSInteger 刻度值的數目 */ -(void)setTextLabel:(NSInteger)labelNum { labelArray = [NSMutableArray arrayWithCapacity:labelNum]; CGFloat textDis = (maxNum - minNum)/labelNum; CGFloat angelDis = (maxAngle - minAngle)/labelNum; CGFloat radius = (self.center.x - 75)*scoleNum; CGFloat currentAngle; CGFloat currentText = 0.0f; CGPoint centerPoint = self.center; for(int i=0;i<=labelNum;i++) { currentAngle = minAngle + i * angelDis - POINTEROFFSET; currentText = minNum + i * textDis; UILabel *label = [[UILabel alloc]initWithFrame:CGRectMake(0 , 0 , 30, 50)]; label.autoresizesSubviews = YES; label.textColor = [UIColor whiteColor]; label.backgroundColor = [UIColor clearColor]; //設置刻度的文字的格式 if(i<labelNum/2){ label.textAlignment = UITextAlignmentLeft; }else if (i==labelNum/2){ label.textAlignment = UITextAlignmentCenter; }else{ label.textAlignment = UITextAlignmentRight; } label.text = [NSString stringWithFormat:@"%d",(int)currentText]; label.center = CGPointMake(centerPoint.x+[self parseToX:radius Angle:currentAngle],centerPoint.y+[self parseToY:radius Angle:currentAngle]); [labelArray addObject:label]; [self addSubview:label]; } // 設置刻度表的名稱 UILabel *label = [[UILabel alloc]initWithFrame:CGRectMake(0 , 0 ,100, 40)]; label.autoresizesSubviews = YES; label.textColor = [UIColor whiteColor]; label.backgroundColor = [UIColor clearColor]; label.textAlignment = UITextAlignmentCenter; label.text = GAUGESTRING; label.center = CGPointMake(centerPoint.x,centerPoint.y*3/2); [self addSubview:label]; } /* * setLineMark 繪制刻度的標記 * @labelNum NSInteger 刻度是數目 */ -(void)setLineMark:(NSInteger)labelNum { CGFloat angelDis = (maxAngle - minAngle)/labelNum; CGFloat radius = self.center.x; CGFloat currentAngle; CGPoint centerPoint = CGPointMake(self.frame.size.width/2, self.frame.size.height/2); for(int i=0;i<=labelNum;i++) { currentAngle = minAngle + i * angelDis - POINTEROFFSET; //給刻度標記繪制不同的顏色 if(i>labelNum*2/3) { CGContextSetStrokeColorWithColor(context, [[UIColor colorWithRed:1 green:0 blue:0 alpha:0.8] CGColor]); }else if(i>labelNum*1/3){ CGContextSetStrokeColorWithColor(context, [[UIColor colorWithRed:1 green:1 blue:0 alpha:0.8] CGColor]); }else{ CGContextSetStrokeColorWithColor(context, [[UIColor colorWithRed:0 green:1 blue:0 alpha:0.8] CGColor]); } //繪制不同的長短的刻度 if(i%5==0) { CGContextSetLineCap(context, kCGLineCapSquare); CGContextSetLineWidth(context, 3); CGContextStrokePath(context); CGContextMoveToPoint(context,centerPoint.x+[self parseToX:radius-25*scoleNum Angle:currentAngle], centerPoint.y+[self parseToY:radius-25*scoleNum Angle:currentAngle]); CGContextAddLineToPoint(context,centerPoint.x+[self parseToX:radius-65*scoleNum Angle:currentAngle], centerPoint.y+[self parseToY:radius-65*scoleNum Angle:currentAngle]); }else{ CGContextSetLineWidth(context, 2); CGContextSetLineCap(context, kCGLineCapSquare); CGContextStrokePath(context); CGContextMoveToPoint(context,centerPoint.x+[self parseToX:radius-25*scoleNum Angle:currentAngle], centerPoint.y+[self parseToY:radius-25*scoleNum Angle:currentAngle]); CGContextAddLineToPoint(context,centerPoint.x+[self parseToX:radius-40*scoleNum Angle:currentAngle], centerPoint.y+[self parseToY:radius-40*scoleNum Angle:currentAngle]); } } } /* * setGaugeValue 移動到某個數值 * @value CGFloat 移動到的數值 * @isAnim BOOL 是否執行動畫 */ -(void)setGaugeValue:(CGFloat)value animation:(BOOL)isAnim { CGFloat tempAngle = [self parseToAngle:value]; gaugeValue = value; //設置轉動時間和轉動動畫 if(isAnim){ [self pointToAngle:tempAngle Duration:0.6f]; }else { [self pointToAngle:tempAngle Duration:0.0f]; } } /* * pointToAngle 按角度旋轉 * @angel CGFloat 角度 * @duration CGFloat 動畫執行時間 */ - (void) pointToAngle:(CGFloat) angle Duration:(CGFloat) duration { CAKeyframeAnimation *anim=[CAKeyframeAnimation animationWithKeyPath:@"transform"]; NSMutableArray *values=[NSMutableArray array]; anim.duration = duration; anim.autoreverses = NO; anim.fillMode = kCAFillModeForwards; anim.removedOnCompletion= NO; CGFloat distance = angle/10; //設置轉動路徑,不能直接用 CABaseAnimation 的toValue,那樣是按最短路徑的,轉動超過180度時無法控制方向 int i = 1; for(;i<=10;i++){ [values addObject:[NSValue valueWithCATransform3D:CATransform3DRotate(CATransform3DIdentity, [self transToRadian:(gaugeAngle+distance*i)], 0, 0, 1)]]; } //添加緩動效果 [values addObject:[NSValue valueWithCATransform3D:CATransform3DRotate(CATransform3DIdentity, [self transToRadian:(gaugeAngle+distance*(i))], 0, 0, 1)]]; [values addObject:[NSValue valueWithCATransform3D:CATransform3DRotate(CATransform3DIdentity, [self transToRadian:(gaugeAngle+distance*(i-2))], 0, 0, 1)]]; [values addObject:[NSValue valueWithCATransform3D:CATransform3DRotate(CATransform3DIdentity, [self transToRadian:(gaugeAngle+distance*(i-1))], 0, 0, 1)]]; anim.values=values; ; [pointer.layer addAnimation:anim forKey:@"cubeIn"]; gaugeAngle = gaugeAngle+angle; } /* * parseToX 角度轉弧度 * @angel CGFloat 角度 */ -(CGFloat)transToRadian:(CGFloat)angel { return angel*M_PI/180; } /* * parseToX 根據角度,半徑計算X坐標 * @radius CGFloat 半徑 * @angle CGFloat 角度 */ - (CGFloat) parseToX:(CGFloat) radius Angle:(CGFloat)angle { CGFloat tempRadian = [self transToRadian:angle]; return radius*cos(tempRadian); } /* * parseToY 根據角度,半徑計算Y坐標 * @radius CGFloat 半徑 * @angle CGFloat 角度 */ - (CGFloat) parseToY:(CGFloat) radius Angle:(CGFloat)angle { CGFloat tempRadian = [self transToRadian:angle]; return radius*sin(tempRadian); } /* * parseToAngle 根據數據計算需要轉動的角度 * @val CGFloat 要移動到的數值 */ -(CGFloat) parseToAngle:(CGFloat) val { //異常的數據 if(val<minNum){ return minNum; }else if(val>maxNum){ return maxNum; } CGFloat temp =(val-gaugeValue)*angleperValue; return temp; } /* * parseToValue 根據角度計算數值 * @val CGFloat 要移動到的角度 */ -(CGFloat) parseToValue:(CGFloat) val { CGFloat temp=val/angleperValue; CGFloat temp2=maxNum/2+temp; if(temp2>maxNum){ return maxNum; }else if(temp2<maxNum){ return maxNum; } return temp2; } - (void)drawRect:(CGRect)rect { //獲取上下文 context = UIGraphicsGetCurrentContext(); //設置背景透明 CGContextSetFillColorWithColor(context,self.backgroundColor.CGColor); CGContextFillRect(context, rect); //繪制儀表背景 [[self gaugeView ]drawInRect:self.bounds]; //繪制刻度 [self setLineMark:CELLNUM*CELLMARKNUM]; CGContextStrokePath(context); } @end 

設計上值得借鑒的是「數值與角度解耦」:angleperValue 保存每單位數值對應的角度,parseToAngle 負責把外部傳入的數值換算成目標角度,並對越界數據做了鉗制處理;刻度繪製則用顏色分三段(綠、黃、紅)表達區間含義,長短刻度按 5 的倍數區分主次。

Demo 下載地址:https://xiazai.jb51.net/201701/yuanma/GaugeDemo_jb51.rar

以上就是自定義儀表盤的完整實現。若要把尺寸改小,記得同步調整刻度長度與文字大小。

  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved