您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

iPhone 開發:讀取 iPod 音樂庫中的音訊資料

編輯:iOS 開發綜合

從音樂庫取得歌曲清單之後,下一步往往是拿到「聲音本身」——可能要做波形分析、節奏偵測,或任何需要 PCM 原始資料的處理。這件事在 iOS 上有兩條路,取捨在於速度與佔用空間。

方案一:先轉存為 .caf 檔

把歌曲從音樂庫轉存到應用程式目錄,格式為 .caf,使用的介面是 AVAssetReader、AVAssetWriter、AVAssetReaderAudioMixOutput 與 AVAssetWriterInput。

優點是流程直觀、程式碼好寫;缺點有兩個:速度偏慢,而且每讀一首歌就會在應用程式資料夾裡生成一個 .caf 檔——而 .caf 的檔案大小大約是同一首歌 .mp3 的十倍,一首一首累積下來很快就會壓垮使用者的儲存空間。若走這條路,處理完一定要記得刪除暫存檔。

方案二:分塊讀入記憶體

直接把檔案內容分塊讀進記憶體,邊讀邊解析,不必落地成檔案。適合音訊解析這類應用,也不會佔用額外磁碟空間。

// 傳入參數為 MPMediaItem 的 assetURL
- (void)loadToMemory:(NSURL*)asset_url
{
    NSError *reader_error = nil;
    AVURLAsset *item_choosed_asset = [AVURLAsset URLAssetWithURL:asset_url options:nil];
    AVAssetReader *item_reader = [AVAssetReader assetReaderWithAsset:item_choosed_asset
                                                              error:&reader_error];
    if (reader_error) {
        NSLog(@"failed to creat asset reader, reason:%@", [reader_error description]);
        return;
    }

    NSArray *asset_tracks = [item_choosed_asset tracks];
    AVAssetReaderAudioMixOutput *item_reader_output =
        [AVAssetReaderAudioMixOutput assetReaderAudioMixOutputWithAudioTracks:asset_tracks
                                                               audioSettings:nil];
    if ([item_reader canAddOutput:item_reader_output]) {
        [item_reader addOutput:item_reader_output];
    } else {
        NSLog(@"the reader can not add the output");
    }

    UInt64 total_converted_bytes;
    UInt64 converted_count;
    UInt64 converted_sample_num;
    size_t sample_size;
    short* data_buffer = nil;
    CMBlockBufferRef next_buffer_data = nil;

    [item_reader startReading];
    while (item_reader.status == AVAssetReaderStatusReading) {
        CMSampleBufferRef next_buffer = [item_reader_output copyNextSampleBuffer];
        if (next_buffer) {

            total_converted_bytes = CMSampleBufferGetTotalSampleSize(next_buffer);
            sample_size = CMSampleBufferGetSampleSize(next_buffer, 0);
            converted_sample_num = CMSampleBufferGetNumSamples(next_buffer);

            NSLog(@"the number of samples is %f", (float)converted_sample_num);
            NSLog(@"the size of the sample is %f", (float)sample_size);
            NSLog(@"the size of the whole buffer is %f", (float)total_converted_bytes);

            // 每取得一次 sample buffer 就立即解析,而不是整檔載入後才處理
            // copyNextSampleBuffer 每次讀取約 8196 個 sample(最後一次除外)
            // 資料以 short 形式存放,每個 short 佔兩位元組
            // 每個 sample 的大小與聲道數相關,可用 CMSampleBufferGetSampleSize 取得
            // 因此每次取得的資料量為 8196 * sample_size (bytes)
            // 對應需要的緩衝區為 (8196 * sample_size) / 2 個 short
            if (!data_buffer) {
                data_buffer = new short[4096 * sample_size];
            }

            next_buffer_data = CMSampleBufferGetDataBuffer(next_buffer);
            OSStatus buffer_status =
                CMBlockBufferCopyDataBytes(next_buffer_data, 0, total_converted_bytes, data_buffer);
            if (buffer_status != kCMBlockBufferNoErr) {
                NSLog(@"something wrong happened when copying data bytes");
            }

            /*
             此時音訊資料位於 data_buffer 中,是未經壓縮的原始資料,
             可進行解析或其他處理
            */

        } else {
            NSLog(@"total sample size %d", converted_count);
            break;
        }
    }

    if (item_reader.status == AVAssetReaderStatusCompleted) {
        NSLog(@"read over......");
    } else {
        NSLog(@"read failed;");
    }
}

方案三:匯出為 m4a 後再讀檔

若只是想把歌曲變成應用程式可直接取用的檔案,用 MPMediaPickerController 挑歌,再以 AVAssetExportSession 轉存即可。

MPMediaPickerController *pickerController =
    [[MPMediaPickerController alloc] initWithMediaTypes:MPMediaTypeMusic];
pickerController.allowsPickingMultipleItems = NO;
pickerController.delegate = self;
[self presentModalViewController:pickerController animated:YES];
[pickerController release];
- (void)mediaPicker:(MPMediaPickerController *)mediaPicker
   didPickMediaItems:(MPMediaItemCollection *)mediaItemCollection
{
    NSArray *media_array = [mediaItemCollection items];
    MPMediaItem *song_item = [media_array objectAtIndex:0];

    NSURL *url = [song_item valueForProperty:MPMediaItemPropertyAssetURL];
    NSLog(@"url is %@", url);

    AVURLAsset *songAsset = [AVURLAsset URLAssetWithURL:url options:nil];
    AVAssetExportSession *exporter =
        [[AVAssetExportSession alloc] initWithAsset:songAsset
                                        presetName:AVAssetExportPresetAppleM4A];

    exporter.outputFileType = @"com.apple.m4a-audio";
    NSString *exportFile = [myDocumentsDirectory() stringByAppendingPathComponent:@"exported.m4a"];

    if ([[NSFileManager defaultManager] fileExistsAtPath:exportFile]) {
        NSError *deleteErr = nil;
        [[NSFileManager defaultManager] removeItemAtPath:exportFile error:&deleteErr];
        if (deleteErr) {
            NSLog(@"Can't delete %@: %@", exportFile, deleteErr);
        }
    }

    NSURL *path_url = [NSURL fileURLWithPath:exportFile];
    exporter.outputURL = path_url;

    [exporter exportAsynchronouslyWithCompletionHandler:^{
        switch (exporter.status)
        {
            case AVAssetExportSessionStatusFailed:
                NSLog(@"AVAssetExportSessionStatusFailed: %@", exporter.error);
                break;
            case AVAssetExportSessionStatusCompleted:
            {
                NSLog(@"AVAssetExportSessionStatusCompleted");
                NSData *data = [NSData dataWithContentsOfURL:path_url];
                NSLog(@"data is %@", data);
                break;
            }
            case AVAssetExportSessionStatusUnknown:
                NSLog(@"AVAssetExportSessionStatusUnknown");
                break;
            case AVAssetExportSessionStatusExporting:
                NSLog(@"AVAssetExportSessionStatusExporting");
                break;
            case AVAssetExportSessionStatusCancelled:
                NSLog(@"AVAssetExportSessionStatusCancelled");
                break;
            case AVAssetExportSessionStatusWaiting:
                NSLog(@"AVAssetExportSessionStatusWaiting");
                break;
            default:
                NSLog(@"didn't get export status");
                break;
        }
    }];

    [mediaPicker dismissModalViewControllerAnimated:YES];
}

怎麼選

三個方案各有定位。需要 PCM 原始樣本做訊號處理,用方案二的分塊讀取,記憶體可控、不落地;需要一個可直接播放或上傳的檔案,用方案三匯出為 m4a;方案一流程最簡單,但在檔案佔用與速度上都要付出代價,如今已有更好的替代做法。

另外幾點共通提醒:上述程式碼為早期 MRC 寫法,ARC 專案請移除 release 呼叫;AVAssetExportSession 的完成回呼在背景執行緒觸發,若要更新介面必須切回主執行緒;讀取音樂庫前別忘了先確認使用者授權狀態。

  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved