您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

iOS 動畫總整理:UIView 動畫與 CAAnimation 三兄弟

編輯:iOS 開發綜合

iOS 中的動畫主要分兩大類:UIView 的視圖動畫,以及 Layer 的動畫。UIView 的動畫其實也是建立在 Layer 動畫之上的簡化介面。兩者的程式碼格式都相當固定,熟悉之後基本可以套用模板。


一、UIView 動畫


基本形式


[UIView beginAnimations:@"ddd" context:nil];   // 開始動畫區塊
[UIView commitAnimations];                     // 提交動畫

這兩句是必須成對出現的,所有動畫程式碼都要寫在中間。


完整參數設定


[UIView beginAnimations:@"ddd" context:nil];   // ddd 為動畫名稱

[UIView setAnimationDuration:3];               // 動畫持續時間
[UIView setAnimationCurve:UIViewAnimationCurveEaseInOut];   // 加減速方式
[UIView setAnimationTransition:UIViewAnimationTransitionCurlDown
                       forView:self.window cache:YES];     // 轉場樣式,forView 指定作用對象
[UIView setAnimationDelay:3];                  // 延遲多久才開始

[UIView setAnimationDelegate:self];            // 動畫代理,須在 commit 之前設定
[UIView setAnimationWillStartSelector:@selector(star)];     // 即將開始時呼叫
[UIView setAnimationDidStopSelector:@selector(stop)];       // 結束後呼叫

[UIView commitAnimations];                     // 提交動畫

轉場樣式的可選值:


typedef enum {
    UIViewAnimationTransitionNone,              // 普通狀態
    UIViewAnimationTransitionFlipFromLeft,      // 從左往右翻轉
    UIViewAnimationTransitionFlipFromRight,     // 從右往左翻轉
    UIViewAnimationTransitionCurlUp,            // 向上翻頁
    UIViewAnimationTransitionCurlDown,          // 向下翻頁
} UIViewAnimationTransition;

加減速曲線的可選值:


typedef enum {
    UIViewAnimationCurveEaseInOut,      // 先加速再減速,最自然
    UIViewAnimationCurveEaseIn,         // 起步慢
    UIViewAnimationCurveEaseOut,        // 收尾慢
    UIViewAnimationCurveLinear          // 等速
} UIViewAnimationCurve;

最簡單的移動動畫


[UIView beginAnimations:@"ddd" context:nil];
view.frame = CGRectMake(200, 200, 100, 100);
[UIView commitAnimations];

當 view 從原本的 frame 移往新的 frame 時,中間會有漸變過程,而不是瞬間跳到位。其他效果也可以疊加在中間,多種效果會同時發生。


可疊加的變換效果


以下這些都能寫在 begin 與 commit 之間:


// 位移
view.transform = CGAffineTransformMakeTranslation(10, 10);      // 相對初始狀態,只能作用一次
view.transform = CGAffineTransformTranslate(view.transform, 10, 10);  // 可連續累加

// 旋轉
self.view.transform = CGAffineTransformMakeRotation(M_PI);          // 只能旋轉一次
self.view.transform = CGAffineTransformRotate(self.view.transform, M_PI);  // 可累加

// 縮放(數值相對於原本的倍數)
self.view.transform = CGAffineTransformMakeScale(1.1, 1.1);         // 只能改變一次
self.view.transform = CGAffineTransformScale(self.view.transform, 1.1, 1.1);  // 可累加

// 還原
self.view.transform = CGAffineTransformIdentity;                    // 回到最初的樣子
self.view.transform = CGAffineTransformInvert(self.view.transform); // 得到相反的樣子

Make 開頭的方法是以「初始狀態」為基準建立新矩陣,因此連續呼叫兩次只會保留最後一次;而 Translate、Rotate、Scale 這些動詞版本是在既有矩陣上「再疊加」,可以累積。這是很多人搞錯的地方。


Block 形式(推薦)


[UIView animateWithDuration:3 animations:^{
    // 這裡相當於 begin 與 commit 之間
} completion:^(BOOL finished){
    // 動畫執行完成後要做的事,還可以再嵌套 block
}];

Block 語法比 begin/commit 好讀得多,也更容易看出動畫的邊界在哪裡,新專案建議一律使用這種寫法。


二、CAAnimation


使用前需加入 QuartzCore 庫並引入標頭檔。CAAnimation 有三個主要子類。


CABasicAnimation


CABasicAnimation *animation = [CABasicAnimation animationWithKeyPath:@"opacity"];
// keyPath 有許多可選值,一定要填對,動畫才會執行
// opacity 設定透明度,bounds.size 設定大小
[animation setFromValue:[NSNumber numberWithFloat:1.0]];   // 起始值
[animation setToValue:[NSNumber numberWithFloat:0.3]];     // 結束值
[animation setDuration:0.1];                               // 動畫時間
[animation setRepeatCount:100000];                         // 重複次數
[animation setRepeatDuration:4];                           // 重複總時長(會限制次數)
[animation setAutoreverses:NO];    // 是否 1.0→0.3→1.0 算一次;設 NO 則 1.0→0.3 為一次
[animation setRemovedOnCompletion:YES];   // 完成時移出動畫(預設即為 YES)
[view.layer addAnimation:animation forKey:@"abc"];        // 執行動畫

CAKeyframeAnimation


CAKeyframeAnimation *animation =
    [CAKeyframeAnimation animationWithKeyPath:@"position"];

NSArray *postionAraay = [NSArray arrayWithObjects:
    [NSValue valueWithCGPoint:CGPointMake(100, 20)],
    [NSValue valueWithCGPoint:CGPointMake(40, 80)],
    [NSValue valueWithCGPoint:CGPointMake(30, 60)],
    [NSValue valueWithCGPoint:CGPointMake(20, 40)],
    [NSValue valueWithCGPoint:CGPointMake(0, 100)],
    nil];

NSArray *times = [NSArray arrayWithObjects:
    [NSNumber numberWithFloat:0.3],
    [NSNumber numberWithFloat:0.5],
    [NSNumber numberWithFloat:0.6],
    [NSNumber numberWithFloat:0.1],
    [NSNumber numberWithFloat:1.0],
    nil];

[animation setKeyTimes:times];
[animation setValues:postionAraay];
[animation setDuration:5];
[bigImage.layer addAnimation:animation forKey:@"dd"];

keyframe 動畫適合路徑不規則的移動。keyTimes 的值必須從 0 到 1 遞增,代表每個關鍵點在整段動畫中的時間佔比。


CATransition


CATransition *animation = [CATransition animation];
animation.duration = 0.5f;
animation.timingFunction = UIViewAnimationCurveEaseInOut;
animation.fillMode = kCAFillModeForwards;

/*
   自帶的 transition 類型:
   kCATransitionFade        淡入淡出
   kCATransitionMoveIn      移入
   kCATransitionPush        推入
   kCATransitionReveal      揭開
*/

/*
   方向:
   kCATransitionFromRight
   kCATransitionFromLeft
   kCATransitionFromTop
   kCATransitionFromBottom
*/

animation.type = kCATransitionPush;
animation.subtype = kCATransitionFromBottom;
[view.layer addAnimation:animation forKey:animation];

type 也可以直接傳字串,如此一來就能使用非公開的私有轉場效果:


cube              立方體翻轉
suckEffect        捲走
oglFlip           翻轉
rippleEffect      水波
pageCurl          翻頁
pageUnCurl        反翻頁
cameraIrisHollowOpen / cameraIrisHollowClose   相機光圈開闔

但要提醒的是,這些字串對應的是私有實作,Apple 未公開保證其行為,使用它們提交 App 審核存在被拒的風險,正式產品請只用上面列出的四個公開常量。

  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved