您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

iOS 學習筆記:手勢辨識器的六種常用手勢

編輯:iOS 開發綜合

手勢(Gesture)指的是從「一或多支手指接觸螢幕」開始,直到「所有手指離開螢幕」為止所發生的一整串事件。UIGestureRecognizer 是一個物件,它知道如何觀察使用者產生的事件流,並判斷何時符合預定義的手勢型態,於是開發者不必再手算位移與角度。

小技巧:在模擬器中按住 option 鍵拖動,可以模擬雙指手勢。

標頭檔:準備一個承載手勢的視圖

@interface LinViewController : UIViewController

@property (retain, nonatomic) UIView *mView;

@end

建立六種手勢

@implementation LinViewController

- (void)viewDidLoad {
    [super viewDidLoad];

    // ----- 點擊手勢 -----
    UITapGestureRecognizer *pSingleTap = [[UITapGestureRecognizer alloc]
        initWithTarget:self action:@selector(singleGesture:)];
    [self.view addGestureRecognizer:pSingleTap];

    UITapGestureRecognizer *pDoubleTap = [[UITapGestureRecognizer alloc]
        initWithTarget:self action:@selector(doubleGesture:)];
    pDoubleTap.numberOfTapsRequired = 2;   // 預設為 1
    [self.view addGestureRecognizer:pDoubleTap];

    // 雙擊存在時,讓單擊不要觸發
    [pSingleTap requireGestureRecognizerToFail:pDoubleTap];

    [pDoubleTap release];
    [pSingleTap release];

    // ----- 滑動手勢 -----
    UISwipeGestureRecognizer *pSwip = [[UISwipeGestureRecognizer alloc]
        initWithTarget:self action:@selector(swipGesture:)];
    pSwip.direction = UISwipeGestureRecognizerDirectionRight;   // 共四個方向
    [self.view addGestureRecognizer:pSwip];
    [pSwip release];

    // ----- 拖動手勢 -----
    UIPanGestureRecognizer *pPan = [[UIPanGestureRecognizer alloc]
        initWithTarget:self action:@selector(panGesture:)];
    [self.view addGestureRecognizer:pPan];
    [pPan release];

    // ----- 長按手勢 -----
    UILongPressGestureRecognizer *pLongPress = [[UILongPressGestureRecognizer alloc]
        initWithTarget:self action:@selector(longPressGesture:)];
    pLongPress.minimumPressDuration = 2;   // 兩秒以上才判定為長按
    [self.view addGestureRecognizer:pLongPress];
    [pLongPress release];

    // ----- 旋轉手勢 -----
    UIRotationGestureRecognizer *pRotation = [[UIRotationGestureRecognizer alloc]
        initWithTarget:self action:@selector(rotationGesture:)];
    [self.view addGestureRecognizer:pRotation];
    [pRotation release];
}

#pragma mark ----- 各手勢對應的方法 -----

- (void)singleGesture:(UITapGestureRecognizer *)tap {
    NSLog(@"單擊操作");
}

- (void)doubleGesture:(UITapGestureRecognizer *)tap {
    NSLog(@"雙擊操作");
}

- (void)swipGesture:(UISwipeGestureRecognizer *)swip {
    NSLog(@"滑動操作,此處為向右滑動");
}

- (void)panGesture:(UIPanGestureRecognizer *)pan {
    // 取得平移手勢在視圖上的座標,把視圖中心移到該點
    CGPoint point = [pan locationInView:self.view];
    self.mView.center = point;
    NSLog(@"%@", NSStringFromCGPoint(point));
}

- (void)longPressGesture:(UILongPressGestureRecognizer *)longPress {
    NSLog(@"長按操作");
}

- (void)rotationGesture:(UIRotationGestureRecognizer *)rotation {
    // 把弧度換成角度,讓視圖做出對應反應
    float degree = rotation.rotation * (180 / M_PI);
    NSLog(@"旋轉的角度為 %.2f", degree);
}

- (void)dealloc {
    [_mView release];
    [super dealloc];
}

- (void)didReceiveMemoryWarning {
    [super didReceiveMemoryWarning];
}

@end

三個實務重點。第一,手势之間存在互斥原則:一旦辨識出某手勢,後續同類手勢便不再被辨識,因此單擊與雙擊並存時必須用 requireGestureRecognizerToFail: 明確排出優先順序。第二,UIRotationGestureRecognizer 的 rotation 是弧度而非角度,顯示或套用動畫前記得換算。第三,手勢必須 addGestureRecognizer 到「真正要接收事件的視圖」上,掛在 self.view 還是掛在自訂子視圖,會直接決定命中範圍。

  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved