您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

iOS 取得 MAC 位址的兩種作法與 iOS 7 之後的限制

編輯:iOS 開發綜合

先說明一個重要前提:下面兩種方法確實都能取得手機的 MAC 位址,但有版本限制——在 iOS 7 之前才有效。

從 iOS 7 開始,Apple 對 sysctl 與 ioctl 這兩個低階網路 API 做了技術處理,回傳的 MAC 位址一律是固定值 02:00:00:00:00:00。官方文件的原文是:

"Two low-level networking APIs that used to return a MAC address now return the fixed value 02:00:00:00:00:00. The APIs in question are sysctl(NET_RT_IFLIST) and ioctl(SIOCGIFCONF). Developers using the value of the MAC address should migrate to identifiers such as -[UIDevice identifierForVendor]. This change affects all apps running on iOS 7."

因此在 iOS 7 之後,已經無法用 MAC 位址作為裝置的唯一識別碼,必須改用其他替代方案。

需要的標頭檔

#include <sys/sysctl.h>
#include <net/if.h>
#include <net/if_dl.h>

方法一

// 取得本機 MAC 位址
// 靈感來自 FreeBSD hackers 郵件列表
- (NSString *)macaddress {
    int mib[6];
    size_t len;
    char *buf;
    unsigned char *ptr;
    struct if_msghdr *ifm;
    struct sockaddr_dl *sdl;

    mib[0] = CTL_NET;
    mib[1] = AF_ROUTE;
    mib[2] = 0;
    mib[3] = AF_LINK;
    mib[4] = NET_RT_IFLIST;

    if ((mib[5] = if_nametoindex("en0")) == 0) {
        printf("Error: if_nametoindex error\n");
        return NULL;
    }

    if (sysctl(mib, 6, NULL, &len, NULL, 0) < 0) {
        printf("Error: sysctl, take 1\n");
        return NULL;
    }

    if ((buf = malloc(len)) == NULL) {
        printf("Could not allocate memory. error!\n");
        return NULL;
    }

    if (sysctl(mib, 6, buf, &len, NULL, 0) < 0) {
        printf("Error: sysctl, take 2\n");
        free(buf);
        return NULL;
    }

    ifm = (struct if_msghdr *)buf;
    sdl = (struct sockaddr_dl *)(ifm + 1);
    ptr = (unsigned char *)LLADDR(sdl);

    NSString *outstring = [NSString stringWithFormat:@"%02x:%02x:%02x:%02x:%02x:%02x",
                           *ptr, *(ptr + 1), *(ptr + 2), *(ptr + 3), *(ptr + 4), *(ptr + 5)];
    NSLog(@"outString: %@", outstring);

    free(buf);

    return [outstring uppercaseString];
}

方法二

- (NSString *)getMacAddress {
    int mgmtInfoBase[6];
    char *msgBuffer = NULL;
    size_t length;
    unsigned char macAddress[6];
    struct if_msghdr *interfaceMsgStruct;
    struct sockaddr_dl *socketStruct;
    NSString *errorFlag = NULL;

    // 設定 Management Information Base (mib)
    mgmtInfoBase[0] = CTL_NET;        // 要求網路子系統
    mgmtInfoBase[1] = AF_ROUTE;       // 路由表資訊
    mgmtInfoBase[2] = 0;
    mgmtInfoBase[3] = AF_LINK;        // 要求link layer資訊
    mgmtInfoBase[4] = NET_RT_IFLIST;  // 要求所有已設定的介面

    // 取得介面的 handle index
    if ((mgmtInfoBase[5] = if_nametoindex("en0")) == 0) {
        errorFlag = @"if_nametoindex failure";
    } else {
        // 取得可用資料的大小
        if (sysctl(mgmtInfoBase, 6, NULL, &length, NULL, 0) < 0) {
            errorFlag = @"sysctl mgmtInfoBase failure";
        } else {
            // 依上面的結果配置記憶體
            if ((msgBuffer = malloc(length)) == NULL) {
                errorFlag = @"buffer allocation failure";
            } else {
                // 取得系統資訊並存入緩衝區
                if (sysctl(mgmtInfoBase, 6, msgBuffer, &length, NULL, 0) < 0) {
                    errorFlag = @"sysctl msgBuffer failure";
                }
            }
        }
    }

    if (errorFlag != NULL) {
        NSLog(@"Error: %@", errorFlag);
        free(msgBuffer);
        return errorFlag;
    }

    // 對應到介面訊息結構
    interfaceMsgStruct = (struct if_msghdr *)msgBuffer;

    // 對應到 link-level socket 結構
    socketStruct = (struct sockaddr_dl *)(interfaceMsgStruct + 1);

    // 把 link layer 位址資料複製到陣列
    memcpy(&macAddress, socketStruct->sdl_data + socketStruct->sdl_nlen, 6);

    // 轉為傳統的 MAC 位址格式
    NSString *macAddressString = [NSString stringWithFormat:@"%02x:%02x:%02x:%02x:%02x:%02x",
                                  macAddress[0], macAddress[1], macAddress[2],
                                  macAddress[3], macAddress[4], macAddress[5]];
    NSLog(@"Mac Address: %@", macAddressString);

    free(msgBuffer);

    return macAddressString;
}

iOS 7 之後該用什麼

這兩段程式碼在現代專案中已無實用價值,但仍有參考意義——它示範了如何透過 sysctl 走訪網路介面。若目的是取得裝置識別碼,可以考慮以下選項:

identifierForVendor:同一開發者的 App 在同一裝置上會得到相同值,但卸載該開發者的所有 App 後會重置。適合做為分析用途的基礎識別。

Keychain 保存 UUID:把首次產生的 UUID 寫入 Keychain,因為 Keychain 的內容在 App 被刪除後仍會保留,因此可以實現跨安裝的穩定識別。實作時需注意 iOS 7 之後的 kSecAttrAccessibleAfterFirstUnlockThisDeviceOnly 等可見性設定。

ASIdentifierManager:廣告識別碼(IDFA),使用者可在系統設定中重設或關閉,且需遵循 ATT 框架的透明度規範才能存取。

需要特別注意的是,上述任何方案都不應用於規避 Apple 的隱私政策。若App 收集可識別資訊,必須在 App Store 的隱私權條目與 App Privacy Details 中如實揭露。

  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved