您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

《iOS 應用逆向工程》學習筆記(六):用 dumpdecrypted 砸殼

編輯:iOS 開發綜合

以下流程僅供在自有裝置上進行安全研究與教學分析使用,請勿用於破解他人應用。

原本打算用 AppCrackr 砸殼,結果一直失敗。起初以為是 App 的加密太強,後來才知道是 AppCrackr 手法過於粗暴引發爭議,核心功能被迫關閉了。幸好逆向工程社群裡還能找到 dumpdecrypted 這個方案,以下記錄整個砸殼過程。

一、準備工具

1. 下載 dumpdecrypted 原始碼

下載位址:https://github.com/stefanesser/dumpdecrypted/archive/master.zip,在 Mac 中解壓。

2. 確認 iOS 裝置版本

此處環境為 iOS 7.1.x。

3. 檢視 Makefile

cd 到 dumpdecrypted 目錄,看看 Makefile 的內容:

CC_BIN=`xcrun --sdk iphoneos --find gcc`
GCC_UNIVERSAL=$(GCC_BASE) -arch armv7 -arch armv7s -arch arm64
SDK=`xcrun --sdk iphoneos --show-sdk-path`
CFLAGS =
GCC_BASE = $(GCC_BIN) -Os $(CFLAGS) -Wimplicit -isysroot $(SDK) -F$(SDK)/System

all: dumpdecrypted.dylib

dumpdecrypted.dylib: dumpdecrypted.o
	$(GCC_UNIVERSAL) -dynamiclib -o $@ $^

%.o: %.c
	$(GCC_UNIVERSAL) -c -o $@ $<

clean:
	rm -f *.o dumpdecrypted.dylib

關鍵在於確認 GCC_UNIVERSAL 與 SDK 這兩個變數的值與 iOS 裝置環境一致。

4. 對齊 SDK 版本

在 Mac 終端機執行以下指令查看 SDK 版本:

xcrun --sdk iphoneos --show-sdk-path
/Applications/Xcode 5.1.1.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS7.1.sdk

SDK 是 7.1.x,與裝置一致,GCC_UNIVERSAL 這個變數可以略過。

二、編譯動態庫

第一次失敗

確認設定一致後,在當前目錄執行 make,結果失敗:

`xcrun --sdk iphoneos --find gcc` -Os -Wimplicit -isysroot `xcrun --sdk iphoneos --show-sdk-path` -F`xcrun --sdk iphoneos --show-sdk-path`/System/Library/Frameworks -F`xcrun --sdk iphoneos --show-sdk-path`/System/Library/PrivateFrameworks -arch armv7 -arch armv7s -arch arm64 -c -o dumpdecrypted.o dumpdecrypted.c
/bin/sh: /Applications/Xcode: No such file or directory
make: *** [dumpdecrypted.o] Error 127

原因是找不到 /Applications/Xcode 來執行其中的腳本。我的 Mac 上有三個 Xcode(5.0.2、5.1.1、6 Beta4),偏偏沒有 /Applications/Xcode。把 5.1.1 改名即可:

$ sudo mv Xcode\ 5.1.1.app/ Xcode.app/

第二次失敗

再 make 還是同樣的錯誤。這類「找不到 Xcode」的問題通常該找 xcode-select 幫忙:

$ xcode-select -p
/Applications/Xcode 5.1.1.app/Contents/Developer

原來 xcrun 查找工具時的路徑仍指向 Xcode 5.1.1,自然什麼都找不到。重置它即可(預設是 /Applications/Xcode.app/):

$ sudo xcode-select -r
$ xcode-select -p
/Applications/Xcode.app/Contents/Developer

成功

再 make,這次通過了:

$ make
`xcrun --sdk iphoneos --find gcc` -Os -Wimplicit -isysroot `xcrun --sdk iphoneos --show-sdk-path` ... -c -o dumpdecrypted.o dumpdecrypted.c
`xcrun --sdk iphoneos --find gcc` -Os -Wimplicit -isysroot `xcrun --sdk iphoneos --show-sdk-path` ... -dynamiclib -o dumpdecrypted.dylib dumpdecrypted.o
$ ls
Makefile  dumpdecrypted.c  dumpdecrypted.o  README  dumpdecrypted.dylib

目錄中多了兩個檔案,其中 .dylib 就是我們要的動態庫,也就是砸殼用的「錘子」。

三、砸殼

1. 把工具放進裝置

查看裝置 IP 後,用 scp 把 dylib 送過去:

$ scp dumpdecrypted.dylib root@192.168.xxx.xxx:/var/tmp
root@192.168.xxx.xxx's password:
dumpdecrypted.dylib                    100%   81KB  81.0KB/s   00:00

2. 執行

選定一個用於教學分析的 App。在裝置上用 iFile 查到它的可執行檔路徑:

/var/mobile/Applications/EBBD26E9-DDBA-481E-9403-84D159436889/HBGC.app/HBGC

SSH 連到裝置,cd 到剛剛放動態庫的路徑:

$ ssh root@192.168.xxx.xxx
root# cd /var/tmp/
root# ls
dumpdecrypted.dylib*  cydia.log  launchd/  MediaCache/  ...

執行砸殼:

root# DYLD_INSERT_LIBRARIES=dumpdecrypted.dylib /var/mobile/Applications/EBBD26E9-DDBA-481E-9403-84D159436889/HBGC.app/HBGC
mach-o decryption dumper

DISCLAIMER: This tool is only meant for security research purposes, not for application crackers.

[+] detected 32bit ARM binary in memory.
[+] offset to cryptid found: @0xd5a90(from 0xd5000) = a90
[+] Found encrypted data at address 00004000 of length 3047424 bytes - type 1.
[+] Opening /private/var/mobile/Applications/.../HBGC for reading.
[+] Reading header
[+] Detecting header type
[+] Executable is a FAT image - searching for right architecture
[+] Correct arch is at offset 16384 in the file
[+] Opening HBGC.decrypted for writing.
[+] Copying the not encrypted start of the file
[+] Dumping the decrypted data into the file
[+] Copying the not encrypted remainder of the file
[+] Setting the LC_ENCRYPTION_INFO->cryptid to 0 at offset 4a90
[+] Closing original file
[+] Closing dump file

成果:

root# ls
HBGC.decrypted  cydia.log  dumpdecrypted.dylib*  launchd/  ...

其中的 HBGC.decrypted 就是目標產物,之後就能帶進 IDA 等工具做靜態分析了。

附錄:xcrun 與 xcode-select

先看 xcrun 的說明:

$ xcrun -h
Usage: xcrun [options] <tool name> ... arguments ...
Find and execute the named command line tool from the active developer directory.
...
  --sdk <sdk name>      find the tool for the given SDK name
  -f, --find            only find and print the tool path
  -r, --run             find and execute the tool (the default behavior)
  --show-sdk-path       show selected SDK install path
  --show-sdk-version    show selected SDK version

xcrun 的作用,是從「作用中的開發者目錄」裡查找並執行某個命令列工具。例如 Makefile 中的:

GCC_BIN=`xcrun --sdk iphoneos --find gcc`

可以拆成三步理解:

(1)xcrun --find gcc

$ xcrun --find gcc
/Applications/Xcode 5.1.1.app/Contents/Developer/usr/bin/gcc

取得 gcc 的路徑,設為 cmd_tool_path。

(2)xcrun --sdk iphoneos cmd_tool_path —— 透過該路徑取得對應 iphoneos SDK 的具體工具並執行。

(3)GCC_BIN 就是這整個「查找並執行」過程的 shell 命令。

再看:xcrun --sdk iphoneos --show-sdk-path

$ xcrun --show-sdk-path
/Applications/Xcode 5.1.1.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk
$ xcrun --sdk iphoneos --show-sdk-path
/Applications/Xcode 5.1.1.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS7.1.sdk

而 xcode-select 則負責列印或變更這個「作用中的開發者目錄」:

$ xcode-select -h
Usage: xcode-select [options]
  -p, --print-path      print the path of the active developer directory
  -s <path>, --switch <path>  set the path for the active developer directory
  -r, --reset           reset to the default command line tools path

它控制的是 Xcode 命令列工具(如 xcodebuild)與 BSD 開發指令(如 cc、make)實際採用哪一份工具鏈,而 xcrun 正是從這個目錄中查找工具。它的值通常是:

/Applications/Xcode 5.1.1.app/Contents/Developer

例如在 /Applications/Xcode 5.1.1.app/Contents/Developer/usr/bin 中,就能看到前面需要的 gcc 等工具(部分輸出):

$ ls
BuildStrings  gcc  gcov-4.2  git  ibtool  ld  xcrun  xcodebuild  ...

釐清這兩者的關係後,前面 make 失敗的原因就很清楚了:Xcode 被改名後,xcrun 查找工具的路徑仍指向舊位置,只要用 xcode-select -r 把開發者目錄重置回預設值,問題自然消失。

以上是我在自己裝置上的完整記錄,實際操作時請依自身環境調整。詳細內容可參考社群中的「用 dumpdecrypted 砸殼」相關討論。

  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved