您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

iOS 基本 UI 控件總覽:Button、Switch、Slider、Segment、ToolBar 與 WebView

編輯:iOS 開發綜合

寫 iOS 介面,最終都會回到幾個基礎控件上。本文整理 Button、開關、滑桿、分段控件、工具列與 WebView 這六個最常見的 UIKit 元件,包含各自的關鍵 API、屬性設定方式與最小可運行的範例。

3.1 Button 控件

UIButton 之所以能做出很有層次的視覺效果,關鍵在於它支援多種狀態,每種狀態都能獨立設定圖片、背景與標題:

· Default State(預設)
· Highlighted State(按下時)
· Selected State(選取)
· Disabled State(不可用)

以下實作「點擊 Disable 按鈕,在兩個按鈕的可用/不可用狀態之間切換」。先建立 ButtonsBackground 專案。

ButtonsBackgroundViewController.h:

@interface ButtonsBackgroundViewController : UIViewController {
    UIButton *clearButton;
    UIButton *smallButton;
}
@property (nonatomic, retain) IBOutlet UIButton *clearButton;
@property (nonatomic, retain) IBOutlet UIButton *smallButton;
- (IBAction)disableBut:(id)sender;
@end

ButtonsBackgroundViewController.m:

@synthesize clearButton;
@synthesize smallButton;

- (IBAction)disableBut:(id)sender {
    if (clearButton.enabled == YES) {
        clearButton.enabled = NO;
        smallButton.enabled = NO;
        [((UIButton *)sender) setTitle:@"Enable" forState:UIControlStateNormal];
    } else {
        clearButton.enabled = YES;
        smallButton.enabled = YES;
        [((UIButton *)sender) setTitle:@"Disable" forState:UIControlStateNormal];
    }
}

- (void)dealloc {
    [clearButton release];
    [smallButton release];
    [super dealloc];
}

點擊 Disable 時會呼叫 disableBut:,其中切換了兩個按鈕的 enabled 狀態,同時改寫自己身上的標題。這裡的 sender 就是事件源,也就是被點擊的那顆按鈕本身。

介面配置要點:把 File's Owner 連到 clearButton 與 smallButton 兩個 outlet;再把 Disable 按鈕的 Action 連到 disableBut:。

clearButton 屬性設定:

· 勾選 “Shows Touch on Highlight”
· Default State:圖片 power.png、背景 butbackgray.png
· Highlighted State:圖片 power.png、背景 butbackbluegray.png
· Disabled State:圖片 powerdisabled.png、背景 butbackgraydisabled.png

smallButton 屬性設定:

· Default State:背景 butbackgray.png、title “Shock”
· Highlighted State:背景 butbackbluegray.png、title “Shocking”

3.2 開關控件(UISwitch)

類似桌面系統的 checkbox,只有 true / false 兩種狀態。以程式碼切換狀態:

- (void)setOn:(BOOL)on animated:(BOOL)animated

3.3 滑桿控件(UISlider)

水平放置,可用手拖動改變數值。預設最小值 0、最大值 1.00、初始值 0.50,可透過下列方法調整:

- (void)setValue:(float)value animated:(BOOL)animated

開關與滑桿實例

SwitchSliderViewController.h:

@interface SwitchSliderViewController : UIViewController {
    UISwitch *mySwitch;
}
@property (nonatomic, retain) IBOutlet UISwitch *mySwitch;
- (IBAction)handleSwitch:(id)sender;
- (IBAction)handleSlider:(id)sender;
@end

SwitchSliderViewController.m:

@implementation SwitchSliderViewController
@synthesize mySwitch;

- (IBAction)handleSwitch:(id)sender {
    if ([((UISwitch *)sender) isOn] == YES) {
        NSLog(@"It's on");
    } else {
        NSLog(@"It's off");
    }
}

- (IBAction)handleSlider:(id)sender {
    NSLog(@"value: %f", ((UISlider *)sender).value);
    if ([((UISlider *)sender) value] == ((UISlider *)sender).maximumValue) {
        [mySwitch setOn:YES animated:YES];   // 滑桿拉到底時自動開啟開關
    }
}

- (void)dealloc {
    [mySwitch release];
    [super dealloc];
}

連線重點:開關的 Value Changed 連到 handleSwitch:,滑桿的 Value Changed 連到 handleSlider:,並指定開關的 outlet。

3.4 分段控件(UISegmentedControl)

由兩段或更多段組成,每段行為近似一顆獨立按鈕,常用來做同層級的分頁切換。

- (IBAction)handleSegment:(id)sender {
    UISegmentedControl *mySeg = (UISegmentedControl *)sender;
    if (mySeg.selectedSegmentIndex == 0) {
        NSLog(@"selected zero index...");
    } else if (mySeg.selectedSegmentIndex == 1) {
        NSLog(@"selected one index...");
    } else {
        NSLog(@"selected two index...");
    }
}

把段控件的 Value Changed 連到 File's Owner 的 handleSegment: 即可。

3.4 工具列(UIToolbar)

工具列通常固定在畫面底部,內部可擺放多個按鈕或控件。

@interface ToolBarViewController : UIViewController {
    IBOutlet UIActivityIndicatorView *myActivityView;
}
@property (nonatomic, retain) IBOutlet UIActivityIndicatorView *myActivityView;
- (IBAction)onClickStartButton:(id)sender;
- (IBAction)onClickOpenButton:(id)sender;
@end
@implementation ToolBarViewController
@synthesize myActivityView;

- (IBAction)onClickStartButton:(id)sender {
    if ([myActivityView isAnimating]) {
        [myActivityView stopAnimating];
    } else {
        [myActivityView startAnimating];
    }
}

- (IBAction)onClickOpenButton:(id)sender {
    UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"提示信息"
                                                   message:@"您點擊了打開按鈕"
                                                  delegate:self
                                         cancelButtonTitle:@"Done"
                                         otherButtonTitles:nil];
    [alert show];
    [alert release];
}
@end

連線重點:開啟按鈕連 onClickOpenButton:、開始按鈕連 onClickStartButton:,並把 UIActivityIndicatorView 連到 outlet。

3.5 WebView

UIWebView 是打造混合型 iPhone 應用的利器,不少網站的 iOS 客戶端就是這樣做出來的。它支援 HTML5,但不支援 Flash。

@interface MyWebViewController : UIViewController <UIWebViewDelegate> {
    IBOutlet UITextField *myTextField;
    IBOutlet UIWebView *myWebView;
}
@property (nonatomic, retain) UIWebView *myWebView;
@property (nonatomic, retain) UITextField *myTextField;
- (IBAction)changeLocation:(id)sender;
@end

委托(Delegate)是 iOS 中極重要的設計模式,主要用於事件回呼。宣告了某個協議,就等於承諾提供其中方法的實作。

@implementation MyWebViewController
@synthesize myWebView;
@synthesize myTextField;

- (void)viewDidLoad {
    myWebView.delegate = self;
}

- (void)dealloc {
    myWebView.delegate = nil;
    [myTextField release];
    [myWebView release];
    [super dealloc];
}

- (IBAction)changeLocation:(id)sender {
    [myTextField resignFirstResponder];
    NSURL *url = [NSURL URLWithString:myTextField.text];
    NSURLRequest *request = [NSURLRequest requestWithURL:url];
    [myWebView loadRequest:request];
}

#pragma mark - UIWebViewDelegate
- (void)webViewDidFinishLoad:(UIWebView *)webView {
    NSLog(@"%@", [webView stringByEvaluatingJavaScriptFromString:@"document.body.innerHTML"]);
}
@end

其中 webViewDidFinishLoad: 在頁面載入完成後回呼;而 stringByEvaluatingJavaScriptFromString: 能同步執行一段 JavaScript 並取回結果,例如用 document.body.innerHTML 取得整頁 HTML,或用 document.documentElement.textContent 只取純文字內容。這是原生與網頁互動最簡單的橋梁。

  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved