為 tableView 加上長按手勢之後,常會發現明明只是按住再放開,回呼方法卻執行了兩次。這其實不是 bug,而是 UILongPressGestureRecognizer 的設計使然。
先為 tableView 註冊長按手勢:
UILongPressGestureRecognizer *longPressGr =
[[UILongPressGestureRecognizer alloc] initWithTarget:self action:@selector(longPressAction:)];
longPressGr.minimumPressDuration = 0.5f;
longPressGr.numberOfTouchesRequired = 1;
[_tableView addGestureRecognizer:longPressGr];
[longPressGr release];
回呼方法:
- (void)longPressAction:(UILongPressGestureRecognizer *)longPress {
if (longPress.state == UIGestureRecognizerStateBegan) {
CGPoint point = [longPress locationInView:_tableView];
// 取得長按位置落在哪個 cell 上
NSIndexPath *indexPath = [_tableView indexPathForRowAtPoint:point];
if (indexPath != nil) {
NSLog(@"%ld", (long)indexPath.row);
}
}
}
UILongPressGestureRecognizer 在整個按壓過程中會經歷多個狀態變化:UIGestureRecognizerStatePossible → UIGestureRecognizerStateBegan → 持續變化 → UIGestureRecognizerStateEnded。回呼方法在這些階段都會被呼叫,只是 state 不同。
所以「執行兩次」的真相是:一次是手指按滿 0.5 秒觸發 Began,另一次是手指離開時觸發 Ended。程式碼本身沒有問題,問題在於沒有依 state 過濾。
只要確實判斷 state,就能讓業務邏輯只在該執行的時機跑一次。上面範例中已經用 if (longPress.state == UIGestureRecognizerStateBegan) 做了過濾,這就是正確做法。
若需要在按壓過程中持續追蹤(例如拖動選單),則可改成 switch 明確處理各階段:
- (void)longPressAction:(UILongPressGestureRecognizer *)longPress {
switch (longPress.state) {
case UIGestureRecognizerStateBegan: {
// 剛觸發長按,做初始化
break;
}
case UIGestureRecognizerStateChanged: {
// 手指移動中,更新位置
break;
}
case UIGestureRecognizerStateEnded: {
// 手指離開,收尾
break;
}
default:
break;
}
}
順帶一提,透過 indexPathForRowAtPoint: 取得 nil 就代表長按落在空白處,實務上記得加這層判斷,否則後面取值會出錯。