本文透過完整程式碼詳細講解 iOS 地圖的使用,示範如何顯示地圖、取得定位,並在移動時即時描繪出軌跡。
第一步:加入框架(雖然現在 Xcode 幾乎會自動處理,但還是保險起見手動加入)

第二步:配置 plist 檔案

第三步:直接上程式碼,請務必仔細閱讀註解。
#import "ViewController.h" // 導入定位和地圖的兩個框架 #import#import // 簽訂定位和地圖的代理協議 @interface ViewController () // 位置管理者 @property (nonatomic, strong) CLLocationManager *localManager; // 地圖 @property (nonatomic, strong) MKMapView *mapView; // 存放用戶位置的數組 @property (nonatomic, strong) NSMutableArray *locationMutableArray; @end @implementation ViewController #pragma mark - 位置管理者懶加載 - (CLLocationManager *)localManager { if (_localManager == nil) { _localManager = [[CLLocationManager alloc]init]; // 設置定位的精度 [_localManager setDesiredAccuracy:kCLLocationAccuracyBest]; // 位置信息更新最小距離 _localManager.distanceFilter = 10; // 設置代理 _localManager.delegate = self; // 如果沒有授權則請求用戶授權(requestAlwaysAuthorization 為 iOS8 後提出,需加條件判斷防止崩潰) if ([CLLocationManager authorizationStatus]==kCLAuthorizationStatusNotDetermined && [_localManager respondsToSelector:@selector(requestAlwaysAuthorization)]) { [_localManager requestAlwaysAuthorization]; } // 創建存放位置的數組 _locationMutableArray = [[NSMutableArray alloc] init]; } return _localManager; } - (void)viewDidLoad { [super viewDidLoad]; // 全屏顯示地圖並設置地圖的代理 _mapView = [[MKMapView alloc] initWithFrame:[UIScreen mainScreen].bounds]; _mapView.delegate = self; // 是否啟用定位服務 if ([CLLocationManager locationServicesEnabled]){ NSLog(@"開始定位"); // 調用 startUpdatingLocation 後會進入 didUpdateLocations 方法 [self.localManager startUpdatingLocation]; } else{ NSLog(@"定位服務為關閉狀態,無法使用定位服務"); } // 用戶位置追蹤 _mapView.userTrackingMode = MKUserTrackingModeFollow; /** 地圖樣式: MKMapTypeStandard 標準地圖 MKMapTypeSatellite 衛星地圖 MKMapTypeHybrid 混合地圖 MKMapTypeSatelliteFlyover 衛星立體地圖 MKMapTypeHybridFlyover 混合立體地圖 */ _mapView.mapType = MKMapTypeStandard; [self.view addSubview:_mapView]; } #pragma mark - MKMapViewDelegate /** 更新用戶位置,只要用戶改變則調用此方法(包括第一次定位到用戶位置) 第一種畫軌跡的方法:我們用地圖上的變化來描繪軌跡,這種方式不用考慮從 CLLocationManager 取出的經緯度在 mapView 上顯示有偏差的問題 */ -(void)mapView:(MKMapView *)mapView didUpdateUserLocation:(MKUserLocation *)userLocation{ NSString *latitude = [NSString stringWithFormat:@"%3.5f",userLocation.coordinate.latitude]; NSString *longitude = [NSString stringWithFormat:@"%3.5f",userLocation.coordinate.longitude]; NSLog(@"更新的用戶位置:緯度:%@, 經度:%@",latitude,longitude); // 設置地圖顯示範圍(若不設置會自動顯示區域並以當前用戶位置為中心) MKCoordinateSpan span = MKCoordinateSpanMake(0.05, 0.05); MKCoordinateRegion region = MKCoordinateRegionMake(userLocation.location.coordinate, span); [_mapView setRegion:region animated:true]; if (_locationMutableArray.count != 0) { // 從位置數組中取出最新的位置數據 NSString *locationStr = _locationMutableArray.lastObject; NSArray *temp = [locationStr componentsSeparatedByString:@","]; NSString *latitudeStr = temp[0]; NSString *longitudeStr = temp[1]; CLLocationCoordinate2D startCoordinate = CLLocationCoordinate2DMake([latitudeStr doubleValue], [longitudeStr doubleValue]); // 當前確定到的位置數據 CLLocationCoordinate2D endCoordinate; endCoordinate.latitude = userLocation.coordinate.latitude; endCoordinate.longitude = userLocation.coordinate.longitude; // 移動距離的計算 double meters = [self calculateDistanceWithStart:startCoordinate end:endCoordinate]; NSLog(@"移動的距離為%f米",meters); // 為了美化移動的軌跡,移動的位置超過 10 米方可添加進位置數組 if (meters >= 0){ NSLog(@"添加進位置數組"); NSString *locationString = [NSString stringWithFormat:@"%f,%f",userLocation.coordinate.latitude, userLocation.coordinate.longitude]; [_locationMutableArray addObject:locationString]; // 開始繪制軌跡 CLLocationCoordinate2D pointsToUse[2]; pointsToUse[0] = startCoordinate; pointsToUse[1] = endCoordinate; // 調用 addOverlay 後會進入 rendererForOverlay 方法,完成軌跡繪制 MKPolyline *lineOne = [MKPolyline polylineWithCoordinates:pointsToUse count:2]; [_mapView addOverlay:lineOne]; }else{ NSLog(@"不添加進位置數組"); } }else{ // 數組對象個數為 0 說明是第一次進入,將當前位置加入位置數組 NSString *locationString = [NSString stringWithFormat:@"%f,%f",userLocation.coordinate.latitude, userLocation.coordinate.longitude]; [_locationMutableArray addObject:locationString]; } } -(MKOverlayRenderer *)mapView:(MKMapView *)mapView rendererForOverlay:(id )overlay{ if ([overlay isKindOfClass:[MKPolyline class]]){ #pragma clang diagnostic push #pragma clang diagnostic ignored "-Wdeprecated-declarations" MKPolylineView *polyLineView = [[MKPolylineView alloc] initWithPolyline:overlay]; polyLineView.lineWidth = 10; // 折線寬度 polyLineView.strokeColor = [UIColor blueColor]; // 折線顏色 return (MKOverlayRenderer *)polyLineView; #pragma clang diagnostic pop } return nil; } #pragma mark - CLLocationManagerDelegate /** 當前定位授權狀態發生改變時調用 */ -(void)locationManager:(CLLocationManager *)manager didChangeAuthorizationStatus:(CLAuthorizationStatus)status { switch (status) { case kCLAuthorizationStatusNotDetermined:{ NSLog(@"用戶還未進行授權"); break; } case kCLAuthorizationStatusDenied:{ if([CLLocationManager locationServicesEnabled]){ NSLog(@"用戶不允許程序訪問位置信息或手動關閉了訪問,可幫助跳轉到設置界面"); NSURL *url = [NSURL URLWithString:UIApplicationOpenSettingsURLString]; if ([[UIApplication sharedApplication] canOpenURL:url]) { [[UIApplication sharedApplication] openURL: url]; } }else{ NSLog(@"定位服務關閉,彈出系統提示框,點擊設置可跳轉開啟"); } break; } case kCLAuthorizationStatusRestricted:{ NSLog(@"受限制的"); break; } case kCLAuthorizationStatusAuthorizedAlways:{ NSLog(@"授權允許在前台和後台均可使用定位服務"); break; } case kCLAuthorizationStatusAuthorizedWhenInUse:{ NSLog(@"授權允許在前台可使用定位服務"); break; } default: break; } } /** 我們並沒有把從 CLLocationManager 取出來的經緯度放到 mapView 上顯示 原因:此方法取到的經緯度依據的是地球坐標,但國內地圖顯示按火星坐標標準, 而 MKMapView 已經做過處理,所以此方法中獲取的坐標直接顯示會有偏差, 解法很多,可上網查詢,此處不再贅述 */ - (void)locationManager:(CLLocationManager *)manager didUpdateLocations:(NSArray *)locations { CLLocation *currLocation = [locations lastObject]; NSString *latitude = [NSString stringWithFormat:@"緯度:%3.5f",currLocation.coordinate.latitude]; NSString *longitude = [NSString stringWithFormat:@"經度:%3.5f",currLocation.coordinate.longitude]; NSString *altitude = [NSString stringWithFormat:@"高度值:%3.5f",currLocation.altitude]; NSLog(@"位置發生改變:緯度:%@,經度:%@,高度:%@",latitude,longitude,altitude); [manager stopUpdatingLocation]; } // 定位失敗的回調方法 - (void)locationManager:(CLLocationManager *)manager didFailWithError:(NSError *)error { NSLog(@"無法獲取當前位置 error : %@",error.localizedDescription); } #pragma mark - 距離測算 - (double)calculateDistanceWithStart:(CLLocationCoordinate2D)start end:(CLLocationCoordinate2D)end { double meter = 0; double startLongitude = start.longitude; double startLatitude = start.latitude; double endLongitude = end.longitude; double endLatitude = end.latitude; double radLatitude1 = startLatitude * M_PI / 180.0; double radLatitude2 = endLatitude * M_PI / 180.0; double a = fabs(radLatitude1 - radLatitude2); double b = fabs(startLongitude * M_PI / 180.0 - endLongitude * M_PI / 180.0); double s = 2 * asin(sqrt(pow(sin(a/2),2) + cos(radLatitude1) * cos(radLatitude2) * pow(sin(b/2),2))); s = s * 6378137; meter = round(s * 10000) / 10000; return meter; } @end
以上程式碼詳細說明了地圖的使用,以及真機環境下可能出現的各種授權狀況。定位與位移是常用功能,透過這份程式碼入門,能幫助你更好地開發地圖相關功能。程式碼也實作了即時描繪軌跡的功能——當然它並非完美,加上百度還推出了鷹眼地圖可供查看軌跡。開發時,選擇最適合自己需求的方法來完成功能才是關鍵。