您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發綜合

【iOS】一次性解決導航欄的所有問題

編輯:iOS 開發綜合

前言

前一段時間換了工作,項目趕得緊,文章就擱下了,現在閒下來趕緊補一篇。今天集中處理導航欄的各種問題,從系統默認行為說起,一路講到自定義返回按鈕、全屏滑動返回,最後是切換動畫的方案。


系統默認的返回按鈕與交互

默認情況下,導航欄左上角的返回按鈕,其文案取自上一個 ViewController 的 title;若上一級沒有設置 title,則顯示 Back(中文環境為「返回」)。點擊返回和右滑返回都不需要任何配置,這部分沒有太多可說的。

自定義左上角返回按鈕

絕大多數項目都要替換返回按鈕。這件事本身不難,但有幾個細節值得注意。

替換按鈕

創建一個 UIButton,包成 UIBarButtonItem 掛到 leftBarButtonItem 上即可:

- (void)viewDidLoad {
    [super viewDidLoad];

    UIButton *leftBtn = [UIButton buttonWithType:UIButtonTypeSystem];
    leftBtn.frame = CGRectMake(0, 0, 25, 25);
    [leftBtn setBackgroundImage:[UIImage imageNamed:@"nav_back"] forState:UIControlStateNormal];
    [leftBtn addTarget:self action:@selector(leftBarBtnClicked:) forControlEvents:UIControlEventTouchUpInside];

    self.navigationItem.leftBarButtonItem = [[UIBarButtonItem alloc] initWithCustomView:leftBtn];
}

- (void)leftBarBtnClicked:(UIButton *)btn {
    [self.navigationController popViewControllerAnimated:YES];
}

調整按鈕位置

上面這種寫法,按鈕會偏右一點。想讓它貼近屏幕左緣,直接改 frame 是行不通的——NavigationItem 是個比較特殊的容器,沒法用簡單的 frame 調整來定位左右按鈕。

的解法是借 UIBarButtonSystemItemFixedSpace,把一個固定寬度的間距項放在按鈕前面,寬度取負值:

// 返回按鈕
UIButton *leftBtn = [UIButton buttonWithType:UIButtonTypeSystem];
leftBtn.frame = CGRectMake(0, 0, 25, 25);
[leftBtn setBackgroundImage:[UIImage imageNamed:@"icon_back"] forState:UIControlStateNormal];
[leftBtn addTarget:self action:@selector(leftBarBtnClicked:) forControlEvents:UIControlEventTouchUpInside];
UIBarButtonItem *leftBarBtn = [[UIBarButtonItem alloc] initWithCustomView:leftBtn];

// 負寬度的間距項
UIBarButtonItem *spaceItem = [[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemFixedSpace
                                                                          target:nil
                                                                          action:nil];
spaceItem.width = -15;

self.navigationItem.leftBarButtonItems = @[spaceItem, leftBarBtn];

這樣返回按鈕就緊貼屏幕邊緣了。同樣的手法也適用於右側按鈕。

讓右滑返回重新生效

替換系統返回按鈕後,經常會發現側滑返回手勢失效。解法是重新指定 interactivePopGestureRecognizer 的代理:讓 ViewController 遵守 UIGestureRecognizerDelegate,然後:

self.navigationController.interactivePopGestureRecognizer.delegate = self;

全屏滑動返回

這是非常常見的需求,網上方案很多,這裡貼的是我常用的做法。核心思路:拿到系統滑動手勢的 target,創建一個自己的 pan 手勢複用它的 action,然後禁用系統手勢。

// 取得系統手勢的 target
id target = self.interactivePopGestureRecognizer.delegate;

// 自建全屏 pan,直接調用系統的切換方法
UIPanGestureRecognizer *pan = [[UIPanGestureRecognizer alloc] initWithTarget:target
                                                                      action:@selector(handleNavigationTransition:)];
pan.delegate = self;
[self.view addGestureRecognizer:pan];

// 關掉系統自帶的邊緣手勢
self.interactivePopGestureRecognizer.enabled = NO;

原理就這麼簡單。handleNavigationTransition: 是系統內部的方法,雖然沒有公開接口,但可以直接調用,不必擔心私有 API 的問題——如果 Apple 按方法名判定私有 API,誤傷的 App 數量會非常可觀。

NavigationBar 切換動畫的「終極方案」

不想看長文的同學可以直接跳到最后看集成方式。

換好樣式、做好全屏返回之後,導航欄看著還不錯,但切換時仍然是系統自帶的漸變動畫。一旦前一屏的 NavigationBar 是透明或隱藏的,或者前後兩屏的 Bar 顏色差異較大,這個漸變就非常難看。

天貓、美團等 App 的解法是把導航欄「整體返回」:整個頁面連同導航欄一起平移,而不是只動內容區。這樣兩個 NavigationBar 相互獨立,滑動切換中的各種狀態錯亂問題也就不復存在。

基本原理

實現這個效果大致有三條思路:

  1. 用 setNavigationBarHidden:animated:,在 viewWillDisappear: 隱藏、viewWillAppear: 顯示;Push 前截圖存數組,Pop 時取出顯示,滑動結束後調用系統 Pop 並刪除截圖。
  2. Push 前截圖保存,Pop 時用截圖做位移動畫。
  3. 使用 iOS 7 之後開放的 UIViewControllerAnimatedTransitioning 協議,自定義轉場動畫與交互。

方法一非常繁瑣,還會冒出各種難以定位的問題,直接放棄。

另外要區分兩種場景:Push 一般由按鈕點擊或 cell 的 tap 觸發,屬於「無交互」;Pop 既可能來自返回按鈕,也可能來自右滑手勢,屬於「有交互」。下面分別用方法二和方法三來實現,兩者配合基本能覆蓋所有情況。

實現交互式動畫(滑動返回)

准備工作

#define ScreenWidth  [UIScreen mainScreen].bounds.size.width
#define ScreenHeight [UIScreen mainScreen].bounds.size.height

@interface LTNavigationController () 
@property (strong, nonatomic) UIImageView *screenshotImgView;      // 截圖
@property (strong, nonatomic) UIView *coverView;                   // 半透明遮罩
@property (strong, nonatomic) NSMutableArray *screenshotImgs;      // 截圖棧
@property (strong, nonatomic) UIPanGestureRecognizer *panGestureRec;
@end

@implementation LTNavigationController

- (void)viewDidLoad {
    [super viewDidLoad];

    // 1. 側滑手勢,只響應左緣
    _panGestureRec = [[UIScreenEdgePanGestureRecognizer alloc] initWithTarget:self
                                                                      action:@selector(panGestureRec:)];
    _panGestureRec.edges = UIRectEdgeLeft;
    [self.view addGestureRecognizer:_panGestureRec];

    // 2. 截圖視圖(frame 包含狀態欄高度)
    _screenshotImgView = [[UIImageView alloc] init];
    _screenshotImgView.frame = CGRectMake(0, 0, ScreenWidth, ScreenHeight);

    // 3. 黑色半透明遮罩
    _coverView = [[UIView alloc] init];
    _coverView.frame = _screenshotImgView.frame;
    _coverView.backgroundColor = [UIColor blackColor];

    // 4. 截圖棧
    _screenshotImgs = [NSMutableArray array];
}

手勢響應

- (void)panGestureRec:(UIPanGestureRecognizer *)panGestureRec {
    // 已經是根控制器,無需切換
    if (self.visibleViewController == self.viewControllers[0]) return;

    switch (panGestureRec.state) {
        case UIGestureRecognizerStateBegan:
            [self dragBegin];
            break;
        case UIGestureRecognizerStateEnded:
            [self dragEnd];
            break;
        default:
            [self dragging:panGestureRec];
            break;
    }
}

// 遮罩初始透明度
#define kDefaultAlpha 0.6
// 拖動達到屏寬 3/4 時,遮罩完全消失
#define kTargetTranslateScale 0.75

#pragma mark - 開始拖動

- (void)dragBegin {
    // 每次開始都要把截圖和遮罩插到 window 上
    [self.view.window insertSubview:_screenshotImgView atIndex:0];
    [self.view.window insertSubview:_coverView aboveSubview:_screenshotImgView];

    _screenshotImgView.image = [_screenshotImgs lastObject];
}

#pragma mark - 拖動中

- (void)dragging:(UIPanGestureRecognizer *)pan {
    CGFloat offsetX = [pan translationInView:self.view].x;

    // 整個導航界面跟手右移
    if (offsetX > 0) {
        self.view.transform = CGAffineTransformMakeTranslation(offsetX, 0);
    }

    // 截圖以較慢的速度跟隨,形成視差
    if (offsetX < ScreenWidth) {
        _screenshotImgView.transform = CGAffineTransformMakeTranslation((offsetX - ScreenWidth) * 0.6, 0);
    }

    // 遮罩隨位移線性變透明
    double currentScale = offsetX / self.view.frame.size.width;
    _coverView.alpha = kDefaultAlpha - (currentScale / kTargetTranslateScale) * kDefaultAlpha;
}

#pragma mark - 結束拖動

- (void)dragEnd {
    CGFloat translateX = self.view.transform.tx;
    CGFloat width = self.view.frame.size.width;

    if (translateX <= 40) {
        // 位移不足,彈回
        [UIView animateWithDuration:0.3 animations:^{
            self.view.transform = CGAffineTransformIdentity;
            _screenshotImgView.transform = CGAffineTransformMakeTranslation(-ScreenWidth, 0);
            _coverView.alpha = kDefaultAlpha;
        } completion:^(BOOL finished) {
            [_screenshotImgView removeFromSuperview];
            [_coverView removeFromSuperview];
        }];
    } else {
        // 位移足夠,完成返回
        [UIView animateWithDuration:0.3 animations:^{
            self.view.transform = CGAffineTransformMakeTranslation(width, 0);
            _screenshotImgView.transform = CGAffineTransformMakeTranslation(0, 0);
            _coverView.alpha = 0;
        } completion:^(BOOL finished) {
            // 動畫結束後必須歸零 transform,否則下次拖動會錯亂
            self.view.transform = CGAffineTransformIdentity;
            [_screenshotImgView removeFromSuperview];
            [_coverView removeFromSuperview];
            [self popViewControllerAnimated:NO];
        }];
    }
}

截圖與 Push 時機

- (void)screenShot {
    UIViewController *beyondVC = self.view.window.rootViewController;
    CGSize size = beyondVC.view.frame.size;
    UIGraphicsBeginImageContextWithOptions(size, YES, 0.0);

    CGRect rect = CGRectMake(0, 0, ScreenWidth, ScreenHeight);
    // iOS 7 之後 renderInContext: 已由 drawViewHierarchyInRect:afterScreenUpdates: 取代
    [beyondVC.view drawViewHierarchyInRect:rect afterScreenUpdates:NO];

    UIImage *snapshot = UIGraphicsGetImageFromCurrentImageContext();
    if (snapshot) { [_screenshotImgs addObject:snapshot]; }

    UIGraphicsEndImageContext();
}

- (void)pushViewController:(UIViewController *)viewController animated:(BOOL)animated {
    // 棧裡已有子控制器時才需要截圖
    if (self.viewControllers.count >= 1) {
        [self screenShot];
    }
    [super pushViewController:viewController animated:YES];
}

重寫各個 Pop 方法

截圖棧的維護要和實際的返回層級對應。如果直接調用 popToViewController: 或 popToRootViewControllerAnimated:,要刪的就不止一張:

- (UIViewController *)popViewControllerAnimated:(BOOL)animated {
    [_screenshotImgs removeLastObject];
    return [super popViewControllerAnimated:animated];
}

- (NSArray *)popToViewController:(UIViewController *)viewController animated:(BOOL)animated {
    for (NSInteger i = self.viewControllers.count - 1; i > 0; i--) {
        if (viewController == self.viewControllers[i]) { break; }
        [_screenshotImgs removeLastObject];
    }
    return [super popToViewController:viewController animated:animated];
}

- (NSArray *)popToRootViewControllerAnimated:(BOOL)animated {
    [_screenshotImgs removeAllObjects];
    return [super popToRootViewControllerAnimated:animated];
}

在指定頁面屏蔽手勢

上面用的是側滑手勢。之所以不用全屏,是因為全屏手勢在某些場景會和系統手勢衝突——比如 TableView 的左滑刪除。如果衝突的是自定義手勢還好協調,撞上系統手勢就很頭疼。

如果產品確實要求全屏,可以在特定控制器裡關掉手勢。做法是維護一個禁用名單:

@property (nonatomic, copy) NSArray *forbiddenArray;

- (void)viewDidLoad {
    [super viewDidLoad];
    self.panGestureRec.enabled = YES;
    self.forbiddenArray = @[@"SCViewController", @"ManageAddressViewController"];
}

- (void)pushViewController:(UIViewController *)viewController animated:(BOOL)animated {
    BOOL enable = YES;
    NSString *className = NSStringFromClass([viewController class]);
    for (NSString *string in self.forbiddenArray) {
        if ([string isEqualToString:className]) { enable = NO; }
    }
    self.panGestureRec.enabled = enable;
    [super pushViewController:viewController animated:animated];
}

- (UIViewController *)popViewControllerAnimated:(BOOL)animated {
    NSInteger count = self.viewControllers.count;
    BOOL enable = YES;
    if (count >= 2) {
        NSString *className = NSStringFromClass([self.viewControllers[count - 2] class]);
        for (NSString *string in self.forbiddenArray) {
            if ([string isEqualToString:className]) { enable = NO; }
        }
    }
    self.panGestureRec.enabled = enable;
    return [super popViewControllerAnimated:animated];
}

實現非交互式動畫(Push / 點擊返回)

這部分要請出 UIViewControllerAnimatedTransitioning。先明確目標效果:

  • Push:FromVC 向左移出,ToVC 從右側跟隨進入,FromVC 消失時 ToVC 恰好完整顯示。
  • Pop:FromVC 向右移出,ToVC 從左側跟隨進入,同樣在 FromVC 消失時完整顯示。

Pop 的實現步驟

  1. 和交互式一樣,Push 時截屏並保存;Pop 時再截一次屏但不保存。
  2. 把 Pop 時截的圖作為 FromVC,把當初 Push 到這一屏時存的圖作為 ToVC。
  3. 對兩張圖做位移動畫,動畫結束後移除。

Push 的實現步驟

  1. 先對當前屏幕截屏。
  2. 截圖一份保存備用(供之後 Pop 使用),一份作為本次 Push 的 FromVC。
  3. 調整導航控制器的 transform 位移參數作為 ToVC 展示。
  4. 截圖與導航欄一起做位移,動畫結束後移除截圖。

為什麼 Push 要動導航欄?
Push 動畫開始之前,我們無法知道 ToVC 具體長什麼樣——系統截屏方法對尚未渲染的 view 無能為力,而 snapshotViewAfterScreenUpdates: 又沒法把導航欄一起映射到新 view 上,視覺效果很差。而在 Pop 場景中,為了達到效果,兩張展示圖片本來就得放在導航欄的 view 上。所以 Push 時索性把導航欄 view 做一個平移變換,截圖則放到「更上一層」的 UITabbarController 的 view 上。

動畫控制器代碼

- (void)animateTransition:(id)transitionContext {
    UIImageView *screentImgView = [[UIImageView alloc] initWithFrame:CGRectMake(0, 0, ScreenWidth, ScreenHeight)];
    screentImgView.image = [self screenShot];

    UIViewController *fromViewController = [transitionContext viewControllerForKey:UITransitionContextFromViewControllerKey];
    UIViewController *toViewController = [transitionContext viewControllerForKey:UITransitionContextToViewControllerKey];
    UIView *toView = [transitionContext viewForKey:UITransitionContextToViewKey];

    CGRect fromViewEndFrame = [transitionContext finalFrameForViewController:fromViewController];
    fromViewEndFrame.origin.x = ScreenWidth;
    CGRect toViewEndFrame = [transitionContext finalFrameForViewController:toViewController];
    CGRect toViewStartFrame = toViewEndFrame;

    UIView *containerView = [transitionContext containerView];
    NSTimeInterval duration = [self transitionDuration:transitionContext];

    if (self.navigationOperation == UINavigationControllerOperationPush) {
        [self.screenShotArray addObject:screentImgView.image];

        [containerView addSubview:toView];
        toView.frame = toViewStartFrame;

        UIView *nextVC = [[UIView alloc] initWithFrame:CGRectMake(ScreenWidth, 0, ScreenWidth, ScreenHeight)];
        nextVC.layer.shadowColor = [UIColor blackColor].CGColor;
        nextVC.layer.shadowOffset = CGSizeMake(-0.8, 0);
        nextVC.layer.shadowOpacity = 0.6;

        [self.navigationController.tabBarController.view insertSubview:screentImgView atIndex:0];

        self.navigationController.view.transform = CGAffineTransformMakeTranslation(ScreenWidth, 0);

        [UIView animateWithDuration:duration animations:^{
            self.navigationController.view.transform = CGAffineTransformMakeTranslation(0, 0);
            screentImgView.center = CGPointMake(-ScreenWidth / 2, ScreenHeight / 2);
        } completion:^(BOOL finished) {
            [nextVC removeFromSuperview];
            [screentImgView removeFromSuperview];
            [transitionContext completeTransition:YES];
        }];
    }

    if (self.navigationOperation == UINavigationControllerOperationPop) {
        [containerView addSubview:toView];

        UIImageView *lastVcImgView = [[UIImageView alloc] initWithFrame:CGRectMake(-ScreenWidth, 0, ScreenWidth, ScreenHeight)];
        lastVcImgView.image = [self.screenShotArray lastObject];

        screentImgView.layer.shadowColor = [UIColor blackColor].CGColor;
        screentImgView.layer.shadowOffset = CGSizeMake(-0.8, 0);
        screentImgView.layer.shadowOpacity = 0.6;

        [self.navigationController.tabBarController.view addSubview:lastVcImgView];
        [self.navigationController.tabBarController.view addSubview:screentImgView];

        [UIView animateWithDuration:duration animations:^{
            screentImgView.center = CGPointMake(ScreenWidth * 3 / 2, ScreenHeight / 2);
            lastVcImgView.center = CGPointMake(ScreenWidth / 2, ScreenHeight / 2);
        } completion:^(BOOL finished) {
            [lastVcImgView removeFromSuperview];
            [screentImgView removeFromSuperview];
            [self.screenShotArray removeLastObject];
            [transitionContext completeTransition:YES];
        }];
    }
}

- (void)removeLastScreenShot {
    [self.screenShotArray removeLastObject];
}

- (UIImage *)screenShot {
    UIViewController *beyondVC = self.navigationController.view.window.rootViewController;
    CGSize size = beyondVC.view.frame.size;
    UIGraphicsBeginImageContextWithOptions(size, YES, 0.0);

    CGRect rect = CGRectMake(0, 0, ScreenWidth, ScreenHeight);
    [beyondVC.view drawViewHierarchyInRect:rect afterScreenUpdates:NO];

    UIImage *snapshot = UIGraphicsGetImageFromCurrentImageContext();
    UIGraphicsEndImageContext();
    return snapshot;
}

注意:removeLastScreenShot 需要在使用手勢 Pop 之後調用,用來清理動畫控制器裡保存的截圖。否則交互式與非交互式動畫交替使用時,會出現截圖錯位混亂的問題。

後記

這篇文章斷斷續續寫了四個月,中間因為個人和工作的原因一再拖延,最近才補完,邏輯跳躍之處還請包容。


集成方式
把這四個文件導入工程,然後讓你的導航控制器繼承 KTNavigationController 即可,無需額外配置。

  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved