您现在的位置: IOS教程網 >> IOS系統 >  >> iOS 程式開發 >> iOS 開發基礎

autoresizingMask 使用詳解:Storyboard 與純程式碼兩種做法

編輯:iOS 開發基礎

前言:現在早已不是「只有一種尺寸」的時代,光 iPhone 開發至少就得適配三種尺寸。過去我們可以用絕對座標硬寫控制項位置,現在這招行不通了。你可能會說那做兩套、三套 UI 就好——但那既不高效,也不符合設計原則。

iOS 有兩大自動布局利器:autoresizing 與 Auto Layout(後者是 iOS 6 之後新增)。autoresizing 是 UIView 的屬性,一直存在,使用簡單,但能力不如 Auto Layout 強大。如果你的介面比較簡單、細節要求不高,那麼光用 autoresizing 做自動布局完全夠用。以下就針對 autoresizing 來討論。

0、使用前的基本說明

UIViewAutoresizing 是一個列舉型別,預設值為 UIViewAutoresizingNone,也就是不做任何處理。

typedef NS_OPTIONS(NSUInteger, UIViewAutoresizing) {
    UIViewAutoresizingNone                     = 0,
    UIViewAutoresizingFlexibleLeftMargin       = 1 << 0,
    UIViewAutoresizingFlexibleWidth            = 1 << 1,
    UIViewAutoresizingFlexibleRightMargin      = 1 << 2,
    UIViewAutoresizingFlexibleTopMargin        = 1 << 3,
    UIViewAutoresizingFlexibleHeight           = 1 << 4,
    UIViewAutoresizingFlexibleBottomMargin     = 1 << 5
};

各值說明:

UIViewAutoresizingNone

不隨父視圖的改變而改變

UIViewAutoresizingFlexibleLeftMargin

自動調整 view 與父視圖的左邊距,以保證右邊距不變

UIViewAutoresizingFlexibleWidth

自動調整 view 的寬度,保證左右邊距都不變

UIViewAutoresizingFlexibleRightMargin

自動調整 view 與父視圖的右邊距,以保證左邊距不變

UIViewAutoresizingFlexibleTopMargin

自動調整 view 與父視圖的上邊距,以保證下邊距不變

UIViewAutoresizingFlexibleHeight

自動調整 view 的高度,以保證上下邊距都不變

UIViewAutoresizingFlexibleBottomMargin

自動調整 view 與父視圖的下邊距,以保證上邊距不變

這裡要特別提醒:如果你平常習慣在 Storyboard/Xib 裡設定 autoresizing,改用程式碼設定時很容易理解錯。例如 UIViewAutoresizingFlexibleTopMargin,很容易被誤解成「頂部距離不變」,實際上是「底部距離不變」。解法也很簡單——記住程式碼寫法與 Storyboard 的設定是相反的即可。

autoresizing 的組合使用:

列舉值可以用 | 串接,同時具備多個值的特性,以因應不同場景。例如:

UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleBottomMargin

意思是:view 的寬度隨父視圖寬度等比縮放,距父視圖頂部的距離保持不變。其他組合同理,這裡就不一一列舉了。

注意:

1)只有當 view 的 autoresizesSubviews 屬性為 yes(預設就是 yes)時,autoresizing 才會生效。

2)從 Xcode 6 開始,Storyboard 與 Xib 預設啟用自動布局,因此我們得手動切換才能使用 autoresizing。

具体操作如下圖(打開 Storyboard 檔案就會看到這個畫面):

下面寫一個簡單範例幫助理解,文末會附上 Demo 下載連結。

Demo 目標:

1)頂部距父視圖的距離不變

2)寬度隨父視圖等比拉伸

3)view 與父視圖的左右邊距不變

一、用程式碼控制 autoresizingMask

下面是專案中用到的巨集:

#define topSpace 64
#define kMargin 20
#define kTopViewHeight 44
#define kTopViewWidth 300
#define kTextLabelWidth 200
#define kTextLabelHeight 30

還沒做適配之前的程式碼:

// 以 Iphone4(320, 480)為基礎,設置各控件的位置
// 注意:必須所有控件都按照 Iphone4(320, 480)為基礎初始化一次,不然按比例縮放時會發生錯誤!
UIView *topView = [[UIView alloc] initWithFrame:CGRectMake(kMargin, topSpace, kTopViewWidth, kTopViewHeight)];
CGFloat textLabelTop = (topView.frame.size.width - kTextLabelWidth) / 2;
CGFloat textLabelWidth = (topView.frame.size.height - kTextLabelHeight) / 2;
UILabel *textLabel = [[UILabel alloc] initWithFrame:CGRectMake(textLabelTop, textLabelWidth, kTextLabelWidth, kTextLabelHeight)];

// 設置文字及居中
[textLabel setText:@"Garvey"];
[textLabel setTextAlignment:NSTextAlignmentCenter];

// 分別設置樣式
[topView setBackgroundColor:[UIColor redColor]];
[textLabel setTextColor:[UIColor whiteColor]];

// 添加視圖
[topView addSubview:textLabel];
[self.view addSubview:topView];

執行結果:

改用 autoresizing 做適配:

補充:你可以先以其他裝置的尺寸初始化介面上的控制項,因為 autoresizing 會隨父視圖的變化而調整。

// 以 Iphone4(320, 480)為基礎,設置各控件的位置
// 注意:必須所有控件都按照 Iphone4(320, 480)為基礎初始化一次,不然按比例縮放時會發生錯誤!
UIView *topView = [[UIView alloc] initWithFrame:CGRectMake(kMargin, kTopSpace, kTopViewWidth, kTopViewHeight)];
CGFloat textLabelTop = (topView.frame.size.width - kTextLabelWidth) / 2;
CGFloat textLabelWidth = (topView.frame.size.height - kTextLabelHeight) / 2;
UILabel *textLabel = [[UILabel alloc] initWithFrame:CGRectMake(textLabelTop, textLabelWidth, kTextLabelWidth, kTextLabelHeight)];

// 設置文字及居中
[textLabel setText:@"Garvey"];
[textLabel setTextAlignment:NSTextAlignmentCenter];

// 分別設置樣式
[topView setBackgroundColor:[UIColor redColor]];
[textLabel setTextColor:[UIColor whiteColor]];

// 設置文字控件的寬度按照上一級視圖(topView)的比例進行縮放
[textLabel setAutoresizingMask:UIViewAutoresizingFlexibleWidth];

// 設置 View 控件的寬度按父視圖比例縮放,距父視圖頂部、左邊距和右邊距的距離不變
[topView setAutoresizingMask:UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleBottomMargin | UIViewAutoresizingFlexibleRightMargin | UIViewAutoresizingFlexibleLeftMargin];

// 添加視圖
[topView addSubview:textLabel];
[self.view addSubview:topView];

// 注意:重新設置 topView 位置的程式碼,必須寫在添加視圖的後面,不然 autoresizing 的位置計算會出錯!
CGFloat topViewWidth = kUIScreen.size.width - kMargin * 2;
[topView setFrame:CGRectMake(kMargin, kTopSpace, topViewWidth, kTopViewHeight)];

最後顯示:

二、在 Storyboard 中控制 autoresizingMask

Storyboard 上只有兩個控制項:View 與 Label。

如果完全不設適配,執行結果是:

預設會貼齊左上方,在 Autoresizing 面板上可以看到:

要達到目標效果其實很簡單,兩個控制項如下設定即可:

意思是:

1)頂部距父視圖的距離不變

2)寬度隨父視圖等比拉伸

3)view 與父視圖的左右邊距不變

最後顯示:

小結:

對比這兩種做法,用程式碼控制 autoresizing 顯然麻煩一些;用 Storyboard/Xib 就簡單多了,點幾下就好。看你想選哪種。

Demo 下載:https://pan.baidu.com/s/1qWnxsZU

  1. 上一篇文章:
  2. 下一篇文章:
蘋果刷機越獄教程| IOS教程問題解答| IOS技巧綜合| IOS7技巧| IOS8教程
Copyright © IOS教程網 All Rights Reserved