效果圖

遮罩視圖
這個動畫的關鍵是 UIView 的 maskView 屬性(iOS 8 之後提供)。什麼是遮罩?簡單說,一個視圖除了可以用 alpha 調整透明度,還可以指定另一個視圖當遮罩,由遮罩決定「哪裡看得到、哪裡看不到」。兩者的差別只在於:alpha 是 0~1 的數值,而遮罩視圖的 backgroundColor、alpha、transform 等屬性都會影響最終的顯示效果。
先看一段程式碼:
UIView *viewContainer = [[UIView alloc] initWithFrame:CGRectMake(0, 0, 200, 200)]; viewContainer.backgroundColor = [UIColor blueColor]; UIView *contentView = [[UIView alloc] initWithFrame:CGRectMake(20, 20, 160, 160)]; contentView.backgroundColor = [UIColor redColor]; [viewContainer addSubview:contentView]; UIView *maskView = [[UIView alloc] initWithFrame:CGRectMake(100, 100, 35, 80)]; maskView.backgroundColor = [UIColor yellowColor]; contentView.maskView = maskView;
遮罩視圖決定了視圖的顯示內容
接著分別改 maskView 與 contentView 的透明度,會發現效果完全一樣:
修改透明度的結果
結論:遮罩對視圖的影響,直接反映在「透明度」與「可見尺寸」這兩件事上。
顏色
當顏色不含透明成分時,視圖不會有透明效果。但若把遮罩顏色設成半透明:
maskView.backgroundColor = [UIColor colorWithWhite:1 alpha:0.5]; // 任意顏色
視覺上等於直接設 alpha = 0.5。也就是說,遮罩只取用 alpha 通道,與 RGB 值無關。
maskView 的子視圖
maskView.backgroundColor = [UIColor clearColor]; UIView *sub1 = [[UIView alloc] initWithFrame:CGRectMake(0, 0, 20, 34)]; sub1.backgroundColor = [UIColor blackColor]; UIView *sub2 = [[UIView alloc] initWithFrame:CGRectMake(15, 18, 33, 40)]; sub2.backgroundColor = [UIColor blackColor]; [maskView addSubview:sub1]; [maskView addSubview:sub2];
為了排除遮罩自身的干擾,這裡把 maskView 背景設為透明。
子視圖也會參與遮罩運算
可見即使遮罩本身透明,子視圖仍能構成部分遮罩。因此只要改變子視圖的 alpha,遮罩效果也會跟著改變——這正是碎片動畫的基礎。
動畫實作
回到效果圖:圖片被切成許多小方塊逐塊消失,垂直切成 2 份、水平約 15 份。所以我們在 maskView 上均勻擺放 2 × 15 個子視圖,並給每個加上可識別的 tag:
UIView *maskView = [[UIView alloc] initWithFrame:contentView.bounds];
const NSInteger horizontalCount = 15;
const NSInteger verticalCount = 2;
const CGFloat fadeWidth = CGRectGetWidth(maskView.frame) / horizontalCount;
const CGFloat fadeHeight = CGRectGetHeight(maskView.frame) / verticalCount;
for (NSInteger line = 0; line < horizontalCount; line++) {
for (NSInteger row = 0; row < verticalCount; row++) {
CGRect frame = CGRectMake(line * fadeWidth, row * fadeHeight,
fadeWidth, fadeHeight);
UIView *fadeView = [[UIView alloc] initWithFrame:frame];
fadeView.tag = [self viewTag:line * verticalCount + row];
fadeView.backgroundColor = [UIColor whiteColor];
[maskView addSubview:fadeView];
}
}
contentView.maskView = maskView;
接著遍歷這些子視圖,用 delay 讓它們依序淡出:
for (NSInteger line = 0; line < horizontalCount; line++) {
for (NSInteger row = 0; row < verticalCount; row++) {
NSInteger idx = line * verticalCount + row;
UIView *fadeView = [contentView.maskView viewWithTag:[self viewTag:idx]];
[UIView animateWithDuration:fadeDuration
delay:interval * idx
options:UIViewAnimationOptionCurveLinear
animations:^{ fadeView.alpha = 0; }
completion:nil];
}
}
封裝成 Category
寫動畫時都該想著「怎麼讓它以後能重複使用」。上面這段完全可以封裝成 UIView 的分類,降低對既有程式碼的侵入:
#define LXDMAXDURATION 1.2
#define LXDMINDURATION .2
#define LXDMULTIPLED .25
@interface UIView (LXDFadeAnimation)
/*! @brief 視圖是否已隱藏 */
@property (nonatomic, assign, readonly) BOOL isFade;
/*! @brief 是否處在動畫中 */
@property (nonatomic, assign, readonly) BOOL isFading;
/*! @brief 垂直方塊個數,預設 3 */
@property (nonatomic, assign) NSInteger verticalCount;
/*! @brief 水平方塊個數,預設 18 */
@property (nonatomic, assign) NSInteger horizontalCount;
/*! @brief 方塊動畫間隔,預設 0.7 */
@property (nonatomic, assign) NSTimeInterval intervalDuration;
/*! @brief 單一方塊動畫時間,預設 0.175 */
@property (nonatomic, assign) NSTimeInterval fadeAnimationDuration;
- (void)configurateWithVerticalCount:(NSInteger)verticalCount
horizontalCount:(NSInteger)horizontalCount
interval:(NSTimeInterval)interval
duration:(NSTimeInterval)duration;
- (void)animateFadeWithComplete:(void(^)(void))complete;
- (void)reverseWithComplete:(void(^)(void))complete;
- (void)reverseWithoutAnimate;
@end
在 category 中宣告的屬性,編譯器不會自動合成 getter/setter,也不能直接用「底線 + 名稱」存取 Ivar。因此需要引入 objc/runtime.h,用關聯物件(associated object)動態掛上屬性:
#import <objc/runtime.h>
static const void *kIsFadeKey = &kIsFadeKey;
// 其他 key 同理
- (BOOL)isFade {
return [objc_getAssociatedObject(self, kIsFadeKey) boolValue];
}
- (void)setIsFade:(BOOL)isFade {
objc_setAssociatedObject(self, kIsFadeKey, @(isFade),
OBJC_ASSOCIATION_RETAIN_NONATOMIC);
}
// 其他 getter / setter 依此類推
有了消散動畫,自然也該有還原動畫,順序剛好相反:
NSInteger fadeCount = self.verticalCount * self.horizontalCount;
for (NSInteger idx = fadeCount - 1; idx >= 0; idx--) {
UIView *subview = [self.maskView viewWithTag:[self subViewTag:idx]];
[UIView animateWithDuration:self.fadeAnimationDuration
delay:self.intervalDuration * (fadeCount - 1 - idx)
options:UIViewAnimationOptionCurveLinear
animations:^{ subview.alpha = 1; }
completion:nil];
}
接著有個問題要處理:使用者可能連續點擊。我們必須在動畫進行中忽略新的觸發,並且在「最後一個方塊」的動畫完成時,才知道整體動畫結束。用一個計數器即可:
__block NSInteger timeCount = 0;
// ...
[UIView animateWithDuration:self.fadeAnimationDuration
delay:self.intervalDuration * (fadeCount - 1 - idx)
options:UIViewAnimationOptionCurveLinear
animations:^{ subview.alpha = 1; }
completion:^(BOOL finished) {
if (++timeCount == fadeCount) {
self.isFade = NO;
self.isFading = NO;
if (complete) {
complete();
}
}
}];
// ...
有了完成時機,就能對外提供一個 block 讓呼叫者在動畫結束後接續處理。
輪播碎片動畫
掌握碎片動畫之後,可以做一個更有趣的廣告輪播頁,同樣以 category 實作:
廣告輪播頁
需要哪些步驟?
1. 在目前圖片下方插入一個 UIImageView 預先放好「下一張」,並盡量重複使用同一個實例。
2. 加上 UIPageControl 標示目前頁碼。
對外提供一個傳入圖片陣列的接口:
// 取得關聯綁定的臨時 UIImageView
- (UIImageView *)associateTempBannerWithImage:(UIImage *)image {
UIImageView *tempBanner = objc_getAssociatedObject(self, kTempImageKey);
if (!tempBanner) {
tempBanner = [[UIImageView alloc] initWithFrame:self.frame];
objc_setAssociatedObject(self, kTempImageKey, tempBanner,
OBJC_ASSOCIATION_RETAIN_NONATOMIC);
[self.superview insertSubview:tempBanner belowSubview:self];
}
tempBanner.image = image;
return tempBanner;
}
pageControl 一開始加在執行動畫的 imageView 上,但動畫進行到一半時它也會跟著被遮掉。因此要依 imageView 實際座標另外算一個位置:
- (void)associatePageControlWithCurrentIdx:(NSInteger)idx {
UIPageControl *pageControl = objc_getAssociatedObject(self, kPageControlKey);
if (!pageControl) {
pageControl = [[UIPageControl alloc] initWithFrame:CGRectMake(
self.frame.origin.x,
CGRectGetHeight(self.frame) - 37 + self.frame.origin.y,
CGRectGetWidth(self.frame), 37)];
[self.superview addSubview:pageControl];
pageControl.numberOfPages = self.bannerImages.count;
objc_setAssociatedObject(self, kPageControlKey, pageControl,
OBJC_ASSOCIATION_RETAIN_NONATOMIC);
}
pageControl.currentPage = idx;
}
由於每輪動畫結束後都要再跑一次同樣的流程,我們把「切換」這段邏輯宣告成一個 block 變數,並用 __block 修飾索引,讓回呼中能更新它:
- (void)fadeBanner {
NSParameterAssert(self.superview);
UIImageView *tempBanner = [self associateTempBannerWithImage:
[UIImage imageNamed:self.bannerImages[1]]];
self.stop = NO;
__block NSInteger idx = 0;
__weak typeof(self) weakSelf = self;
[self associatePageControlWithCurrentIdx:idx];
void (^complete)(void) = ^{
NSInteger updateIndex = [weakSelf updateImageWithCurrentIndex:++idx
tempBanner:tempBanner];
idx = updateIndex;
[weakSelf associatePageControlWithCurrentIdx:idx];
};
// 把 block 動態保存起來,並啟動動畫
objc_setAssociatedObject(self, kCompleteBlockKey, complete,
OBJC_ASSOCIATION_COPY_NONATOMIC);
[self animateFadeWithComplete:^{
if (!self.stop) {
complete();
}
}];
}
// 更新圖片並回傳下一次要顯示的索引
- (NSInteger)updateImageWithCurrentIndex:(NSInteger)idx
tempBanner:(UIImageView *)tempBanner {
if (idx >= self.bannerImages.count) {
idx = 0;
}
self.image = [UIImage imageNamed:self.bannerImages[idx]];
[self reverseWithoutAnimate];
NSInteger nextIdx = idx + 1;
if (nextIdx >= self.bannerImages.count) {
nextIdx = 0;
}
tempBanner.image = [UIImage imageNamed:self.bannerImages[nextIdx]];
[self animateFadeWithComplete:^{
if (!self.stop) {
void (^complete)(void) = objc_getAssociatedObject(self, kCompleteBlockKey);
complete();
}
}];
return idx;
}
這裡最容易踩的雷是 block 的生命週期:這個完成回呼必須用 objc_Associate 動態保存。即使你把更新圖片的程式碼直接寫進 complete 裡,也一樣要保存起來,否則 block 跑到第三次就會被釋放而崩潰。另外記得用 __weak 持有 self,避免循環引用。
每次切換完成後,別忘了把所有遮罩子視圖還原,並更新顯示:
- (void)reverseWithoutAnimate {
if (self.isFading) {
NSLog(@"It's animating!");
return;
}
for (UIView *subview in self.maskView.subviews) {
subview.alpha = 1;
}
}
總結
整個碎片動畫的核心其實只有兩件事:用 maskView 決定可見範圍,再對遮罩的子視圖批次跑 alpha 動畫。剩下的都是工程細節——狀態標記、完成時機、block 記憶體管理。把這些處理好,這個效果就能安全地用在正式專案裡。
以上就是 iOS 實作碎片動畫的完整解析,希望對大家開發動畫時有幫助。